Joe,
Have you got a manual? If not, it's available on the CATAUTO website.
You need to do a Dipswitch 7 reset to reset the password. Per the manual:
Switch 7 This switch is used to initialize the CAT-1000B. Set this switch
to ON. Cycle the
power OFF and back ON. During power-up, the memory
Thanks Mike,
This is an older cat1000 and not the B model. I'm trying to short-cut
this repair to get it off my bench but it looks like I'm going to have
to dig into things. This is an older Spectrum Communications repeater
with the CAT1000 controller. The original builder is long gone and
Of Joe
Sent: Monday, December 07, 2009 8:52 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Programming a CAT1000
Thanks Mike,
This is an older cat1000 and not the B model. I'm trying to short-cut
this repair to get it off my bench but it looks like I'm going to have
3 matches
Mail list logo
