"I soldered the "f" and "D" bead and sill wont work..." I assume you meant you
tried soldering D and F, but not both at the same time. Both at once is
invalid, and maybe could cause the no tx audio.
Maybe there is mic bias voltage on pin 4, and you are loading it down,
causing the loss of tx
-Builder] Re: Icom OPC-617 Cable
IC-F121 Icom
On 7/22/2010 11:28 AM, Gary W. Gibbs wrote:
What model radio is this ?
NIMS: 100 200 300 400 700 800
Arrl Extra Class VE
HAZ MAT- A O
sent from my blackberry mobile device
IC-F121 Icom
On 7/22/2010 11:28 AM, Gary W. Gibbs wrote:
What model radio is this ?
NIMS: 100 200 300 400 700 800
Arrl Extra Class VE
HAZ MAT- A O
sent from my blackberry mobile device
@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Icom OPC-617 Cable
The solder jumpers D Data and F Flat only affect the freq response of
the transmitted audio. A wrong setting wouldn't interfere with PTT. I
think there was a drawing in the manual linked below, illustrating the
locations.
Ar
The solder jumpers D Data and F Flat only affect the freq response of
the transmitted audio. A wrong setting wouldn't interfere with PTT. I
think there was a drawing in the manual linked below, illustrating the
locations.
Are you grounding the PTT line and have reprogrammed the radio to allow
5 matches
Mail list logo