Sometimes troubles like this are hard to find because you can't be there
when it is happening. I have found that a Radio Shack Digital Voltmeter
that I have and an old laptop have been handy for such times. I bought
an RS DVM with the RS-232 interface on sale a few years ago. I
connected it
On 8/4/2010 9:18 AM, Joe wrote:
Sometimes troubles like this are hard to find because you can't be there
when it is happening. I have found that a Radio Shack Digital Voltmeter
that I have and an old laptop have been handy for such times. I bought
an RS DVM with the RS-232 interface on sale
Radio Shack Cat No 22-812, I don't know if they even sell them anymore.
Joe
On 8/4/2010 9:50 AM, wd8chl wrote:
Really??? What's the model of that DMM? We could use that here!
Jim
. As a matter of course, I'd resolder all of
them
while you are in there.
Bill
From: Stanley Stanukinos ka5...@swbell.net
To: Repeater-Builder@yahoogroups.com
Sent: Tue, August 3, 2010 8:06:53 PM
Subject: RE: [Repeater-Builder] Re: Mastr II drift problem
Next
://tinyurl.com/2dtngmn
- Original Message -
From: wd8chl
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, August 04, 2010 6:50 AM
Subject: Re: [Repeater-Builder] Re: Mastr II drift problem
On 8/4/2010 9:18 AM, Joe wrote:
Sometimes troubles like this are hard to find
Steve.
Make sure you check the jumpers, if you switch the cards.
Butch, KE7FEL/r
On Wed, Aug 4, 2010 at 6:11 AM, steve w4...@localnet.com wrote:
I am using a PLL exciter with a 5C Icom. I am going to check the 10 volt
supply. I have a couple of 10 volt cards that I will swap out if
Next thing look at the comp voltage going to the tcxo it comes off of the
10v reg card. Have you checked or swapped it yet?
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of steve
Sent: Tuesday, August 03, 2010 8:06 PM
To:
7 matches
Mail list logo