BTW: Which sticks are you in? I'm in EC Indiana, with an
SA that I could loan.
A kind offer, thanks. Different sticks though... I'm in
central Maine, geographically speaking (that's northern
Maine to most of the world :-)
Paul
Yahoo! Groups Links
* To visit your group on the web, go
Title: RE: [Repeater-Builder] UHF Micor (mobile) spur
Paul,
A spur is ususally produced by multiplier circuitry in the transmitter. I would retune the exciter and pay special attention to the position of the slugs prior to retuning. Second you might just have a defective exciter board. Most
LOOKING FOR SERVICE MANUAL OF VXR-7000 VHF REPEATER.
ANY HELP?
MANY THANKS!
Best regards
SV1EDZ
Dimitris Velissaris
Technical Support
RadioCommunications Dpt.
ANCO S.A
44 Syngrou Ave
117 42 Athens
- Greece
Tel : +0302109209217
Fax : +302109209345
URL : www.anco.gr
Sounds like you might have an old boot loader on
the vyex board. Hook your terminal (pc and software
to the vyex board and reboot the 7k/w-dab from a
power off condition. Look at the vyex start message
on the terminal. If it says something like version
1.2, you need to update the lastest
A spur is ususally produced by multiplier circuitry
in the transmitter.
The most common spur generator I run into is sourced
to a power amplifier. Said PA had a previous repair
done by someone who obviously didn't have the right
tools, solder equipment heat and knowledge to properly
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED] wrote:
Sounds like you might have an old boot loader on the vyex board...
___
I had to get the system on the air so the controller is now at the
site. The CD that
I think that maybe these antennas do not work very
well. I have two of them and have tried different
mounts, different radio's different frequency,
checking cables gnds, mounts connections. The bottom
line is I just can't get the swr down enough where I
feel safe about it.
Maybe it's time to sell
Hi Bruce,
I have a C3I audio connected to a Cat 300dx.
As you increase the delay there a hiss that
is heard. If you turn the delay off, the hiss is
silent. Any Ideas?
That audio delay module uses two cascaded Reticon RD5108 bucket-brigade
audio delay chips. Bucket-brigade technology
Anyone got the service amnual for the Vertex VXR 5000 repaeter in PDF
form?
Also I have the software, what cable does it require?
Thanks for your help.
Tim K4TDO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To
9 matches
Mail list logo
