[Repeater-Builder] Re: B & D Enterprises

Boyd is still around but kind of low key right now due to serious work projects and a possible change in location. I'll try to ask him when the controllers will be available again. cheers, skipp > "K4SLB Steve Butler" <[EMAIL PROTECTED]> wrote: > > Does any one know what happened to B & D

RE: [Repeater-Builder] VXR-5000

Mike, The Vertex DXU-B duplexer is a notch-only mobile duplexer that is designed to cover the 430-455 MHz band. Its insertion loss is 1.5 dB, and the notch depth is 85 dB at a 5 MHz split. It is rated to handle 40 watts. If you have a network analyzer or a good spectrum analyzer, simply adjust t

Re: [Repeater-Builder] Repeater Builder 1480 VHF/UHF Antenna

They work good...not as good as a single band antenna,but any dual band antenna is a compromise. Well constructed with the exception of that mounting clamp,replace it before you mount it anywhere. 73,Lee Jim Cicirello wrote: > Hello to Kevin and the group: > I am putting together my 1480 VHF/U

RE: [Repeater-Builder] Courtesy Tone

Thanks mike, that is really cool, adding it to my bookmarks.   Andy KC2GOW New Yahoo! Messenger with Voice. Call regular phones from your PC and save big. YAHOO! GROUPS LINKS  Visit your group "Repeater-Builder" on the web.   To unsubscribe from this group

RE: [Repeater-Builder] Courtesy Tone

Andrew, I found it using google... Stardust E1: 120 ms 750 Hz 0 Hz %Gain =99 0 E2:80 ms 880 Hz 0 Hz %Gain =99 0 E3:80 ms 1200 Hz 880 Hz %Gain =50 0 73 Mike K5JMP www.k5jmp.us -Original

[Repeater-Builder] Courtesy Tone

Does anybody know the tone scheme for the "Stardust" courtesy tone on the ACC controllers? It is CT #5 on the RC-85. I have it on my RC-85 and would like to set it up on my RC-850... Thanks for any input. Andy KC2GOW Yahoo! Groups Links <*> To visit your group on the web, go to: ht

[Repeater-Builder] Re: Adding Bandpass Can to Duplexer

Dwayne, you are right... The cable length Mst be 1/4 electrical wave length to come out right just like the ones on your exesisting duplexer. This is shorter than the calculated wavelength in free space because the RF propegates slower in coax than free space. You have to determine the velocity

Re: [Repeater-Builder] B & D Enterprises

B & D is or was owner and operated by: Boyd Potts 2871 Monroe St Santa Clara, CA 95051-1754 (408) 557-9567 Not sure if he is still in business but his repeater under the callsign kb5jr is still active. Regards, Barry --- K4SLB Steve Butler <[EMAIL PROTECTED]> wrote: > Does any one know what h

Re: [Repeater-Builder] VXR-5000

At 11:30 AM 03/24/06, you wrote: > Anyone can tell me a simple way to tune a small > 6 cavity duplexer on 448 - 443 for a VXR-5000 > Vertex repeater, never done one before. This group has a lot of readers all across the USA, and in many places in the world, and if you say where in 1-land you

Re: [Repeater-Builder] Canadian retailer of coaxial cables

Hutton at www.huttononline.com They have offices in Canada. > > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] Behalf Of bradprimmer > Sent: Friday, March 24, 2006 8:18 AM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Canadi

[Repeater-Builder] B & D Enterprises

Does any one know what happened to B & D Enterprises? The build low cost Controllers. K4SLB Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <

RE: [Repeater-Builder] TLE 1062 B

If you are lloking for just the PA ceck, one or two pages ... if you are looking for the power supply too, more pages ... Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] TLE 1062 B Date: Fri, 24 Mar 2006 13:12:

RE: [Repeater-Builder] TLE 1062 B

How large is it and is copying feasible? Tom Saunders Comm Tech, City of Seattle Amateur Radio Station N7OEP 206.384.1604 [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group,

[Repeater-Builder] Special to KA0SSF - Metrum II

Metrum II channel crystals Motorola Part Number KXN6097AB ICM Part Number 00162200 You are welcome, Neil Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an em

RE: [Repeater-Builder] TLE 1062 B

Thank you - yes I have the info on that PA Deck. Motorola Manual Part Number = 68-81008E20 Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] TLE 1062 B Date: Fri, 24 Mar 2006 10:42:01 -0800 (PST) >tle1062 is p/

[Repeater-Builder] VXR-5000

Anyone can tell me a simple way to tune a small 6 cavity duplexer on 448 - 443 for a VXR-5000 Vertex repeater, never done one before. It's a Vertex Model DXU "B" series duplexer that I purchase with the VXR-5000, this is the same repeater that I'm looking CSC CWID 51B information about, st

[Repeater-Builder] Yoke - for mounting duplexer cavities

Good Day All: I'm looking for a source for the plastic part that Sinclair uses in their duplexers for holding the cans to the cross rails. I found out they call it a 'yoke', but so far have been unsuccessful in getting a part number or price out of them to order some. (Or an RMA for a Circul

[Repeater-Builder] Repeater Builder 1480 VHF/UHF Antenna

Hello to Kevin and the group: I am putting together my 1480 VHF/UHF Dual Band 6/8 dB Collinear Base Station Antenna. While checking the pigtail I made up for the antenna, I discovered that I didn't have any measurable continuity between the center conductor inside the radome to the center of the

RE: [Repeater-Builder] TLE 1062 B

tle1062 is p/a from uhf motrac c74mst base-repeater --- [EMAIL PROTECTED] wrote: > > What is it out of --- so I can know where to > go look? > > Neil - WA6KLA > > Original Message > From: [EMAIL PROTECTED] > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder]

Re: [Repeater-Builder] painting antenna

One of those topics that needs to be on the Repeater-Builders web site, since it comes up about every couple of weeks. Chuck WB2EDV Mike Perryman wrote: > That was covered yesterday > > SHERWIN-WILLIAMS PRODUCTS: > > > >> > > > >> Etch P60G2 "Wash Primer" > > > >> Primer D61H75 "Polane 2.

RE: [Repeater-Builder] TLE 1062 B

What is it out of --- so I can know where to go look? Neil - WA6KLA Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] TLE 1062 B Date: Fri, 24 Mar 2006 08:05:46 -0800 >Anyone on the list have any info on this amp? > >T

Re: [Repeater-Builder] Canadian retailer of coaxial cables

Not necessarily answering your question, but RG400 is the same cable with a stranded center conductor rather than one solid center conductor. It flexes easier. Same size and construction. I've seen it for $1/ft but deals can be found once in a while (100 ft for $60 on eBay was a good buy). Bob M.

[Repeater-Builder] TLE 1062 B

Anyone on the list have any info on this amp? Tom Saunders Comm Tech, City of Seattle Amateur Radio Station N7OEP 206.384.1604 [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this

RE: [Repeater-Builder] painting antenna

That was covered yesterday SHERWIN-WILLIAMS PRODUCTS: > >> > >> Etch P60G2 "Wash Primer" > >> Primer D61H75 "Polane 2.8 Plus Spray Fil" > >> Top Coat Polane Type "HS 2.8 Plus Polyurethane" > >> -Original Message-From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROT

RE: [Repeater-Builder] Canadian retailer of coaxial cables

Brad, I don't know of anyone in Canada.. I can however tell you that Joel over at RF-Connection stocks it.. I bought about 40 ft of it several months back. And it ain't cheap! 73 Mike Perryman www.k5jmp.us -Original Message- From: Repeater-Buil

[Repeater-Builder] painting antenna

would like to paint a cellwave stationmaster...any recommendation as to what would be a fitting paint and where to procure it? thanks chris Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less. YAHOO! GROUPS LINKS

[Repeater-Builder] Canadian retailer of coaxial cables

Anybody in here know of a retailer in Canada that sells RG-142U coaxial cable. This is a double shielded cable that is about the size of RG-58 ? Thanks Brad [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Buil

Re: [Repeater-Builder] Fiberglass antenna protective coating?

In early versions the radials were installed at a 90 degree angle from the mast. Later versions angled them down at about 45 degrees from the mast. In all cases they were secured with a band clamp and most installers simply left them off. The antenna will work just fine without them. IIRC VHF we