I have recently purchased an ICS LinkerIIa controller. Super nice guy onthe phone with prompt shipping.. I have a question for the group..Where I live we have a lot of problems when we do not use PL/CTCSS onrepeaters for various reasons. So my question is this... I am using aconverted Mitrek
Shane,
In my case, I had to supply a COS indication to be able to move to the
next stage... then the inbound signal is evaluated for the presence of the CTCSS tone Once both conditions are
met,my controller will key the
transmitter.
I
don't know for sure how the linker-II
Hi
Richard and Neil...
In my
instance, it floats between 3 and 3.5 volts which is just enough to
confuse my controller as to which state the squelch is actually
in.
Both
approaches would probably work just fine... but haven't had a chance to
deal with it yet.
I can think of a
Ok, enjoy,
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Mitrek COS ?
Date: Fri, 19 May 2006 12:13:02 -0400
Hi Richard and Neil...
In my instance, it floats between 3 and 3.5 volts which is just
enough
to
Shane, I would always hook up the COS as well as the CTCSS decode for
one reason. The controller will cut off the audio to the repeater
transmitter as soon as the COS signal goes away. The CTCSS decode will
always hang a few hundred milliseconds and cause a long squelch break on
the repeater
For those who can't be there,
mms://66.231.242.90/video
Bob NO6B
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is
For those of you not here at Dayton, I want you to know it's a great
year to be here and there's a lot going on. Had my first great braut
and the coffee is still bad.
Kevin, Scott, Ken aren't any better lookin' than last year... but
the same applies to you know who. :-)
Lot's of boat
skipp025 wrote:
For those of you not here at Dayton, I want you to know it's a great
year to be here and there's a lot going on. Had my first great braut
and the coffee is still bad.
Kevin, Scott, Ken aren't any better lookin' than last year... but
the same applies to you know who.
8 matches
Mail list logo