Morning Folks,
Just wanted to give everyone an update on the cleaning of my Moto 1500
series dup.s. I have to
very respectfully now Skipp ;-)
. disagree on
cleaning of the cans. I know a lot of the Moto techs don't worry
about it
but I had the fun of working with several cans now that
either was
Hi Eric,
It appears that a faulty installation of the jumper at the sidearm is
the beginning of the problems, and eliminating all the adaptors you
can is the other component.
Regarding repairing the antenna: is it feasible to make your own
jumper pig tail (perhaps from super flex) and
Hi All
Looking for a CW link identifier. Comm Spec no longer lists this
part. Are there others?
Gran K6RIF
At 10:23 AM 09/08/07, you wrote:
Hi All
Looking for a CW link identifier. Comm Spec no longer lists this
part. Are there others?
Gran K6RIF
I've not played with this kit, so have no first hand knowledge,
but this might do it for you...
http://www.hamgadgets.com/product_info.php?products_id=64
I'm not sure about link ID but the device Mike mentioned is a fast build
and works great! I plan to use this as an Echolink ID board as well.
He also makes a wonderful keyer that I'm installing inside the box with
a QRP radio.
Ronny K4RJJ
Mike Morris wrote:
At 10:23 AM 09/08/07, you
Ronny
Did you buy the Connection Kit as well? Not sure if this is needed.
Gran
PS. Thanks Mike
At 11:03 AM 9/8/2007, you wrote:
I'm not sure about link ID but the device Mike mentioned is a fast build
and works great! I plan to use this as an Echolink ID board as well.
He also makes a
YEP..Got the RC-100 hooked up, programed and working good in my old
Spectrum SCR-77..I have learned alot!!!
Tim
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: 9/7/2007 11:33:43 PM
Subject: [Repeater-Builder] Re: Spectrum Communications
No but I will with the next one I buy. I'm keeping the first one I
built separate because it is a model that has the keyboard CW support
AND the 5v regulator. I don't belive that firmware is available
anymore. I have and will use that feature. The connection kit is a
great interface board.
Eric,
USE THE RADIALS. I tried using a couple that had lost them to the wind/ice
also and the performance is pretty poor. I just made the radials out of some
aluminum stock and bought a new hose clamp. RFS gave me the exact dimensions
for the radials for 440-450. If I find them I'll post
9 matches
Mail list logo