Re: [Repeater-Builder] Sorry everyone

2010-08-11 Thread George Henry
- Original Message - From: "Tim Sawyer" To: Sent: Wednesday, August 11, 2010 10:29 PM Subject: Re: [Repeater-Builder] Sorry everyone >Was your machine on while you were away? If so you may have gotten a virus >or spyware. Sounds like your wife got it too. Spamers like to >infect >ma

RE: [Repeater-Builder] Sorry everyone

2010-08-11 Thread ka9qjg
Dave , Make sure You are Not using and leaving on a Non Secure Wireless Network , I have heard of some strange things going on with the Hackers , I had a Ham Friend who was coming to visit so I watched for Him He was in my driveway and I thought he was having a qso on His radio , He came

RE: [Repeater-Builder] Sorry everyone

2010-08-11 Thread Richard
Sorry to hear of that. I hope you can get your computers cleaned once and for all. Richard, N7TGB www.n7tgb.net The problem with socialism is that eventually you run out of other people's money --Margaret Thatcher _ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@ya

Re: [Repeater-Builder] Sorry everyone

2010-08-11 Thread Tim Sawyer
Was your machine on while you were away? If so you may have gotten a virus or spyware. Sounds like your wife got it too. Spamers like to infect machines just to get control of them for sending spam. The really bad news is that most free spyware removal software is spyware itself. A really good P

[Repeater-Builder] Sorry everyone

2010-08-11 Thread Dave E Stephens Sr
so i got on here this morning and found out that I had sent out a mass email to everyone in my address book with a link to some website. Funny thing is that when this email was sent, I was butt deep in the Applegate River with my family (a location that doesn't even get cell coverage).   this s

Re: [Repeater-Builder] Dielectric diplexer

2010-08-11 Thread Glenn Little WB4UIV
I disassembled one for channel 4. The cavities were about 3 feet in diameter. I salvaged the plungers for the INVAR rods. The diplexer was mounted on a huge roll around aluminum frame. The cavities were connected with 3 inch ridge line. There were four cavities, two fir video and two for audio. The

Re: [Repeater-Builder] Another stolen repeater (California)

2010-08-11 Thread Chuck Kelsey
My bad. Not paying close enough attention. Chuck WB2EDV - Original Message - From: "Eric Lemmon" To: Sent: Wednesday, August 11, 2010 8:31 PM Subject: RE: [Repeater-Builder] Another stolen repeater (California) > Chuck, > > Negative. The contact info you just posted was regarding

RE: [Repeater-Builder] Another stolen repeater (California)

2010-08-11 Thread Eric Lemmon
Chuck, Negative. The contact info you just posted was regarding an Agilent model E4405B Spectrum Analyzer. My posting was regarding "Another Stolen Repeater" with which David Nuechterlein has no connection. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.

RE: [Repeater-Builder] RG-142, RG-400 va RG-223

2010-08-11 Thread Eric Lemmon
Sid, RG-223 will be fine, provided that you use silver-plated connectors that are specifically designed for that cable, and avoid using any barrels or between-series adapters. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yaho

Re: [Repeater-Builder] Another stolen repeater (California)

2010-08-11 Thread Chuck Kelsey
The contact info was in the original post. It is: David Nuechterlein Q-TV , WDCQ TV 15 PBS , WUCX 90.1 NPR Delta College / Delta Broadcasting , Engineering Dept A045 Frank N. Andersen Broadcast Building 1961 Delta Rd. University Center Michigan 48710 989 686 9341 Office 989 326 0051 Mobile Off

RE: [Repeater-Builder] Another stolen repeater (California)

2010-08-11 Thread Eric Lemmon
Gee, It would be VERY helpful if the actual Telecom Service Number and the actual CDF Property Number were provided, up front, along with a TELEPHONE NUMBER to report finding this unit! 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-bu

[Repeater-Builder] Dielectric diplexer

2010-08-11 Thread bil.isom
I have just been told I am about to receive a dielectric brand diplexer rated at 25000 watts on 191 Mhz from a analog TV station. I feel a little bit like the dog that catches the car he is chasing. Now that I have it, what can I do with it? Any ideas? Can it go to 220? Does anyone have any

Re: [Repeater-Builder] RG-142, RG-400 va RG-223

2010-08-11 Thread wd8chl
On 8/11/2010 2:51 PM, Sid wrote: > I have seen a lot of jumpers, interconning cables, duplexer cables, > etc made using RG-142 and RG-400 (the 400 is preferred). However, > RG-223 is also silver, double shielded,very flexible, and also about > RG-58 size. Any reason why RG-223 would not work just

[Repeater-Builder] RG-142, RG-400 va RG-223

2010-08-11 Thread Sid
I have seen a lot of jumpers, interconning cables, duplexer cables, etc made using RG-142 and RG-400 (the 400 is preferred). However, RG-223 is also silver, double shielded,very flexible, and also about RG-58 size. Any reason why RG-223 would not work just as well; other than it is not a teflon

[Repeater-Builder] Quantars For Sale in Nebraska

2010-08-11 Thread radio5000
I came across this in a search... Seemed like a good deal for somebody close... I have no involvement in this, I know nothing about the seller, etc.. http://omaha.craigslist.org/ele/1840686500.html

Re: [Repeater-Builder] Another stolen repeater (California)

2010-08-11 Thread La Rue Communications
Ugh. Now Im worried for all our La Rue repeaters out there. I will be vigilant as I am on eBay daily. I have taken note of it, and will keep my eyes alert. Thank you! John Hymes La Rue Communications 10 S. Aurora Street Stockton, CA 95202 http://tinyurl.com/2dtngmn - Original Message -

Re: [Repeater-Builder] (unknown)

2010-08-11 Thread La Rue Communications
Mike - Your efforts and enforcement are greatly appreciated! It keeps the list clean and spammer free. Thank you, for all you do! Its easily a thankless job and its tough! I know - I've been there myself! :-) John Hymes La Rue Communications 10 S. Aurora Street Stockton, CA 95202 http://tinyur

Re: [Repeater-Builder] (unknown)

2010-08-11 Thread John Gleichweit
Pharma spam. Leads back to a site with a .EU address. -- John "Smokey Behr" Gleichweit FF1/EMT, CCNA, MCSE IPN-CAL023 N6FOG UP Fresno Sub MP183.5 ECV1852 List Owner x10, Moderator x9 CalEMA 51-507 http://smokeybehr.blogspot.com http://www.myspace.com/smokeybehr > >From: La Rue Communications

[Repeater-Builder] Another stolen repeater (California)

2010-08-11 Thread John Gleichweit
Full View This weekend we had a CDF repeater stolen from the Ben Bolte site in El Dorado Hills. It disappeared somewhere between Saturday evening and Sunday morning. >What I would like is for your folks to keep their ears open for any talk about >new equipment, specifically Daniels equipment

Re: [Repeater-Builder] Stolen Equipment Alert

2010-08-11 Thread petedcurtis
Hi, FYI: I find that EBAY has the most HP Test Equipment for sale. I'll keep an eye out for that model. Peter On Wed, Aug 11, 2010 at 7:59 AM, Chuck Kelsey wrote: > > > From another list: > > > Last Thursday , 8-5-2010 We had a Agilent model E4405B Spectrum > > Analyzer boosted (Stolen) from o

[Repeater-Builder] Stolen Equipment Alert

2010-08-11 Thread Chuck Kelsey
>From another list: > Last Thursday , 8-5-2010 We had a Agilent model E4405B Spectrum > Analyzer boosted (Stolen) from our transmitter Facility (Chalet > Building) here on Delta College Campus Near Bay City Michigan .No > forcible entry and no other items taken other then a box of coax > adap

Re: [Repeater-Builder] (unknown)

2010-08-11 Thread x.tait.tech
Ouch Marcus ( sorry prefers to read more than participates ) On Wed, Aug 11, 2010 at 5:45 PM, Mike Morris wrote: > > > Well, in the source address (in the header) is > Dave E Stephens Sr > and he's been a group member since april > of 2008. > > I'm going to give him the benefit of the doubt