I am wanting to swap out the BNC receiver connector to an N
connector on my Kenwood TKR-750 2 meter repeater. After contacting
Kenwood and getting quoted some crack prices I figured I'd see if
anyone has anything laying around or has any ideas on here.
I've got the BNC Connector and the
Mainly because the BNC connectors seem flimsy in my opinion (I've
had two break on two separate HT's over the past few years) and from
reading up whats posted on the net everyone seems to agree that
steering clear of PL-259 and BNC connectors in repeaters is a good idea.
My first and
I'm in the process of programming up a new controller on my repeater
(CAT300DX) and I think I've got everything setup the way I want it
except for the courtesy tone. I was just wondering what others were
using as the courtesy tone on their CAT300s. Any DTMF stings to play
with and get ideas from
Thanks to everyone for the various ideas. I think I'll hit up the
local department of Roads and Bridges and see if I can't snag a used
traffic controller housing. Thanks again guys, 73.
Alex
Does anyone know of any sources for used outdoor repeater cabinets?
I've gotten permission from a local tower owner to locate an amateur
repeater on their tower but one of the stipulations was no access to
the existing equipment room. After a quick search of Tessco I see the
cheapest outdoor
Looking to upgrade to a VHF (2 meter) Motorola MSR2000 or a GE MASTR
II station. Would prefer something in the West Central Florida area as
to save on shipping. Let me know the specs/condition of your equipment
and price. Thanks
A group of us local hams have just started an Amateur Radio
Club and are looking to place a couple repeaters on the air. We
already have one VHF and one UHF repeater sitting in a garage waiting
to be put on the air. We've been looking at local commercial tower
sites as possible locations
After having an eye on ebay for a few weeks and not finding what I'm
looking for I figured I'd see if anyone has anything laying around on
here. I am rebuilding a repeater and am in need of a few parts...
1) Rack, standard 19'' wide and 36'' or 48'' tall. Prefer local to FL
2) 2 GE MASTRII
Hello All,
I am in need of a 110Watt VHF (136-174) Motorola Mitrek for
repeater useage. It would be nice to get a power cord, mounting tray
and Tone board with the radio but the RF deck itself will do. Let me
know what you have and what you want for it. Thanks.
Hello All,
I was wondering if anyone had a manual for a UHF GE Custom MVP they
would be willing to scan and e-mail to me? Trying to retune and put an
amp inline with one and need some information. Any help would be
greatly appreciated, thanks.
Awesome, Thank you much!
Alexander
--- In Repeater-Builder@yahoogroups.com, DCFluX [EMAIL PROTECTED] wrote:
A quick search of the vast Repeater Builder website reveals:
http://www.repeater-builder.com/ge/lbi-library/lbi-30147f.pdf
Awesome, Thank you much!
Alexander
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo!
Hello All,
I remember reading somewhere (I think in an ARRL Handbook) about a
project to install an ELT (Emergency Locater Transmitter) reciever at
a repeater site and link it into the repeater. I quess every time a
signal was received some kind of tone or something came over the
repeater
the power back to 35 watts next time I am at
the repeater site. Thanks.
Alexander
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED] wrote:
Alexander N Tubonjic [EMAIL PROTECTED] wrote:
I am going to be changing a repeater setup
for tx and rx. then use them one tx one rx, but now you have backup
radios built in. If the pa dies on one radio you can just swap them in
the field and be up and runnng again!
73
Tom
W9SRV
Alexander N Tubonjic [EMAIL PROTECTED] wrote:
Hello,
I am going to be changing
on that.
ALexander
--- In Repeater-Builder@yahoogroups.com, Neil McKie [EMAIL PROTECTED] wrote:
Or water cool it ...
Neil
Alexander N Tubonjic wrote:
I quess I forgot the part about the current repeater output, it's
currently putting out 55 watts and has 3 muffin fans blowing
Hello,
I am going to be changing a repeater setup a bit and I think it will
work, I would like to get some feedback from you guy's and see what
yall think. Here goes:
The current setup is as follws:
Duplexed 110 Watt Mitrek into controller and Duplexer, Nothing
really fancy.
What I
Well I picked up a 60 watt Mitrek with 4 sets of channel elements at
the magic price (free) locally. Now I need the wiring harness for it,
anyone have a spare Mitrek Wiring Harness they could part with? Let me
know, thanks.
Alexander
Hello All,
I am in need of one, possibly two VHF Mitreks. Would like to get the
110 watt versions but could make do with the 45 watt versions. I need
power cords to go with them. One onboard preamp would be nice as would
one Pl decode board, would prefer to have atleast a set of channel
Hello All,
The local department of Forestry has an observation tower that is
over 200' off the ground. I would like to put my UHF Amateur repeater
on that tower. I stopped by yesterday and talked to the Fire Fighter
that was stationed there. He had told me that cellphone companies had
asked if
.
Alexander N Tubonjic
KG4OGN
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email
21 matches
Mail list logo
