RE: [Repeater-Builder] Just a couple of dB loss you say?

I have always like mine: What is a db or two among friends? Thank you Joe LaGanga I am prepared to meet my Maker. Whether my Maker is prepared for the great ordeal of meeting me is another matter. -- Sir Winston Churchill (1874 - 1965) -Original Message- From: Com

RE: [Repeater-Builder] East coast system?

There are a few variables in figuring this out, one is the actual path loss, which is 65db per mile, output power which is 53dbm, and then the sensitivity of the receiver on the other end, and most radios are in the -102 to -107dbm receive sensitivity. So with all this information you can figure

RE: [Repeater-Builder] Receiver Sensitivity

It is receiver A Thank you Joe I find television very educating. Every time somebody turns on the set, I go into the other room and read a book. -- Groucho Marx, 1890-1977 -Original Message- From: dy3lmk143_13mhz [mailto:[EMAIL PROTECTED] Sent: Monday, April 19, 2004 8:05 AM To:

RE: [Repeater-Builder] RX Attenuators. Good Source?

Mini-Circuits is a great source for attenuators, they come in all values and different sizes (wattages) and with different connectors. Thank you Joe I find television very educating. Every time somebody turns on the set, I go into the other room and read a book. -- Groucho Marx, 1890-1977

RE: [Repeater-Builder] Micor Delay Line

Does anyone know of a source for the back planes? Thank you Joe I find television very educating. Every time somebody turns on the set, I go into the other room and read a book. -- Groucho Marx, 1890-1977 -Original Message- From: Neil McKie [mailto:[EMAIL PROTECTED] Sent: Tuesday,

RE: [Repeater-Builder] question about combiners

If you supply the frequencies and power levels it would be helpful in answering this question Thank you Joe N1EZO/8 I find television very educating. Every time somebody turns on the set, I go into the other room and read a book. -- Groucho Marx, 1890-1977 -Original

RE: [Repeater-Builder] Re: Interference Found!

Lightspan is a very common deployment network product for the RBOC's. They create quite a bit of noise, and it should be the 96 times 1.5415 clock that is the over all clocking for the T1's that ride on the equipment. This may be caused by a T1 or a shelf not being properly terminated. If you know

RE: [Repeater-Builder] rg-142 cable assembly

Try Connectech in Chicago or even Tessco in Maryland. I have personally used both and the turn around is great. 3-5 days. Contact me off list if you need further info. [EMAIL PROTECTED] Thank you Joe I find television very educating. Every time somebody turns on the set, I go into the