Does anyone know of a source for the back planes? Thank you Joe
I find television very educating. Every time somebody turns on the set, I go into the other room and read a book. -- Groucho Marx, 1890-1977 -----Original Message----- From: Neil McKie [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 16, 2003 1:27 PM To: [email protected] Subject: Re: [Repeater-Builder] Micor Delay Line Best thing to do is get the backplane (motherboard) that is used on the more standard Micor Base station and repeater. Life is much simpler that way. Neil McKie - WA6KLA Jeff DePolo WN3A wrote: > > Just in case you aren't aware, if the Micor came with an Allen > Avionics delay unit, chances are it was a Micor PURC station built > for paging. Longshot, it could have been a simulcast voice repeater, > but those are extremely rare. If, in fact, it's a PURC, it has a > different backplane and a few different cards in the shelf. If you > can get your hands on a PURC manual (it's a supplement manual, like > the Micor control shelf "orange book"), it will make the conversion > go much easier. I have a lot of Micor PURC's and have converted > several to standard repeater use; once you understand the > idiosyncracies between the PURC and the standard Micor RT, it's no > big deal, but without the book, you'll spend a lot of time chasing > down traces on the backplane... > > --- Jeff > --------- > Jeff DePolo WN3A > Broadcast and Communications Consultant > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, December 16, 2003 6:50 AM > > To: [email protected] > > Subject: Re: [Repeater-Builder] Micor Delay Line > > > > > > For a check to cover to cover shipping,I will sell the one I > > have. I am working on "trying" to convert a Micor Compa > > station into a UHF repeater and it came with the delay brick. > > > > Contact me directly off-list, > > > > Joe > > N1EZO/8 > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
