-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Tony Alviar
(Home)
Sent: Friday, January 02, 2009 5:19 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] mastr II question. . .
OK not sure if this goes here or on the Mastr II and/or GE
See omission below
-Original Message-
From: Tony Alviar (Home) [mailto:talv...@worldnet.att.net]
Sent: Saturday, January 03, 2009 11:07 AM
To: 'Repeater-Builder@yahoogroups.com'
Subject: RE: [Repeater-Builder] mastr II question. . . IFAS Board
With that said. . . Here is my main
OK not sure if this goes here or on the Mastr II and/or GE list figured I'd
try here first though. . . .
Have a mastr II continuos duty high band repeater station (factory GE
repeater)
Looking for LBI # that covers IF/audio/squelch board p/n 19D432667G1 REV A
most of this board matches the
Was looking thru a stack of manuals here and found the one that had the
board in it. . .
As reference though LBI 4986 is what I was looking for. . . .
Thanks anyway.
Tony
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Tony Alviar (Home
Decibel Products got bought by Andrew Corp.
Andrew got bought out by CommScope.
www.andrew.com
Also search for db224 that is probably the antenna you are referring to.
Tony, KA3VOR
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On
Kevin are you sure about that?
DB-- RFS?
Phelps Dodge-- Celwave -- RFS and a few others.
I'm pretty sure DB -- Andrew -- Commscope
In fact running DB224 on www.andrew.com --
www.commscope.com/andrew/eng/index.html
and drilling down to find the Base Station Antenna search tool
Not a bad idea for tonight!
Have a pleasant one!
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Wednesday, December 31, 2008 8:53 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Decibel
Brian,
That I believe (wisco intl) is a reseller. Tesco, Hutton Communications and
others resell the antenna.
Currently running a DB408-A (450-470) on a ham repeater here in Western PA
(443.750-W3PIE) and only thing truly noticed is when comparing to business
band repeaters operating same
Chuck,
Reason I mentioned downtilt is two of the UHF antennas on the tower with
same gain factor on 450-470 with downtilt in the design has similar coverage
to this unit.
I'll agree a reduction in gain will do the same.
Thanks for the correction.
Tony
_
From:
I concur with Joe.
WPRC has done a good job at putting a CTCSS grid in their coordination area.
Corey-- a note . . . In my case I maintain 4 repeaters in Fayette County, PA
with 3 of them being mounted at 2600-2800 AMSL and a HAAT greater than
1000'. On the eastern side of the mountain ridge
Remember that most Bag phones are Analog only devices. . . .
When the carrier shuts down the Analog capability of the Cell Phone Site in
accordance with the FCC Rules/Regs/etc/whatever, the phone will not be able
to dial 911 at all. In fact, the phone won't function enough to tell you it
can't do
Uniontown Amateur Radio Club (W3PIE) received ours friday last week. It's a
shame that an order placed in mid February took until last week to get
confirmation that our stuff had been received by Dayton Flea Market
Committee. . . . .
- Original Message -
From: mch [EMAIL PROTECTED]
12 matches
Mail list logo
