Glenn and Group,
You were right on the channel elment being the issue ( placed a kxn 1024 for
uhf and right on Rx.) Now i am looking for a KXN 1019 VHF not finding any in
boxes or ebay. anyone have one they can spare?
Ryan n3ssl
--- In Repeater-Builder@yahoogroups.com, Glenn Little WB4UIV
Glenn,
Is it safe to say look in the channel element for the bad cap ?
Tempeture is not a issue with this unit it was in a heated and A/C garage kept
about 65-80 degrees with dehumdifer. I am glad the new site is climate
controlled also.
Ryan n3ssl
--- In Repeater-Builder@yahoogroups.com
to check or a fluke the crystals are both bad.
Ryan n3ssl
bad.
Ryan n3ssl
Yahoo! Groups Links
The Vega C-6200 ( Now Telex) is a popular console that will fit the needs. I
know of 3-4 in use in various communications trucks.
Ryan n3ssl
--- In Repeater-Builder@yahoogroups.com, Jed Barton j...@... wrote:
give me an idea of an easy roip console. Any ideas?
-Original Message
works for the Maratrac series.
Ryan n3ssl
What Coax or hardline and antenna's are in use for both rpt's ? What happens
when another RX is used at the site? Maybe a IF issue with the Ham rpt's and 72
mhz some thoughts.
Ryan n3ssl
Hi Kevin and group,
I get PTT on pin 9 and 10. before i replace parts the manual says about Q8 and
a CR5 as problems any thoughts ?
Ryan n3ssl
--- In Repeater-Builder@yahoogroups.com, Kevin Custer kug...@... wrote:
n3ssl wrote:
Hi Group,
I have a Vhf Micor unified station
is the TLN 4635
Ryan n3ssl
due to power supply issue. used to
have several but now in use.
Thanks in advance,
Ryan n3ssl
Hi Group,
Perform a Search on www.youtube.com for GE Mastr A guy from Allentown PA has a
good videos on what it takes to convert a mobile and do the controller install.
Very informative
Ryan n3ssl
Hi Group,
I think the guy is talking about the new station master made by celwave RFS.
These don't have the flat head screws. Has anyone taken apart any of the new
style? And if so any pictures ?
Ryan n3ssl
12 matches
Mail list logo