[Repeater-Builder] Celwave Duplexer
I picked up a Celwave mobile duplexer. On the labe it say Cat. No. 5070 Serial No. 11-55C-84The label says miniplexer by Celwave. It is a 6 cavity unit. The connectors are attached to the duplexer by RG-174 sized lengths of coax. Connectors are BNC. Each cavity is 1 inch square and 2 inches long. Anybody familiar with this unit ar have any specs on it? Its planned use is to use a single antenna on a full-duplex link. Thanks Jamey Wright KD4SIY 444.325 Eva, AL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Celwave duplexer
Al, The Motorola part number HFD8457A is a VHF mobile notch-type duplexer made by RFS/Celwave. The Celwave part number is 636-6A-5-3. It is for 150-160 MHz, with 4.5 MHz minimum spacing between TX and RX. It is the standard duplexer used in GR1225, RKR1225, and GR400 repeaters. 73, Eric Lemmon WB6FLY Al Wolfe wrote: I have a Celwave duplexer, number HFD8457A, and no info about it. It's a small six cavity unit, probably mobile, and probably 450 or 800 MHz... Anyone got a clue as to what this is?... Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/