Re: [Repeater-Builder] Kenwood TKR-750 (VHF repeater)

2010-08-30 Thread Jeff Ackerman
IF you have a ver 2, you can do a mod detailed in the service manual by
switching the position of some cap's to make it work on one port without a
antenna relay.

On Sat, Aug 28, 2010 at 3:11 PM, Ken Arck ah...@ah6le.net wrote:



 At 01:47 PM 8/28/2010, Juan Tellez wrote:
 
 
 For simplex use, you have to have an external antenna relay.
 
 

 -Yup. You need an external relay. Checkout RF Parts as they have
 fairly reasonably priced ones

 Ken
 --
 President and CTO - Arcom Communications
 Makers of repeater controllers and accessories.
 http://www.arcomcontrollers.com/
 Authorized Dealers for Kenwood and Telewave and
 we offer complete repeater packages!
 AH6LE/R - IRLP Node 3000
 http://www.irlp.net
 We don't just make 'em. We use 'em!

  




-- 
Jeff Ackerman
Peninsula Communications
6 Rossi Circle, Suite C
Salinas, Ca 93907
j...@peninsulacom.com


[Repeater-Builder] Kenwood TKR-750 (VHF repeater)

2010-08-28 Thread Dave Schultheis
Hello folks,

I have a TKR-850 operating as a UHF repeater and EchoLink/IRLP node. 
It works great!

I have a TKR-750 that I would like to put into service on a simplex 
frequency.  The advertising literature and the service manual both 
state that it can be used on simplex using only one antenna, and I 
have set the programming to simplex rather than repeater.

However, I cannot find anything stating which antenna to use and/or 
what other cabling must be used, what other procedure to follow, or 
what other step must be taken.

Is it as simple as screwing the antenna coax into the TX connector?

The receiver works just fine, and I can hear strong local signals by 
alligator-clipping an antenna to the RX input.  My next step is to 
alligator-clip an antenna to the TX input to see if I can receive as 
well there.

Does anybody have any experience with either of these (or similar 
units) that can point me to the proper procedure or documentation?


73 de Dave WB6KHP
San Jose
IRLP 3246 / EchoLink 525493

pushing sine wave energy through the atmosphere since 1965

--

dave6592 [at] accesscom [dot] com - http://www.accesscom.com/~dave6592
Dave Schultheis, San José, Silicon Valley, Santa Clara County, CA, USA


[Repeater-Builder] Kenwood TKR-750 (VHF repeater)

2010-08-28 Thread Juan Tellez
For simplex use, you have to have an external antenna relay.

 

JT

 

De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En nombre de Dave Schultheis
Enviado el: Sábado, 28 de Agosto de 2010 01:34 p.m.
Para: Repeater-Builder@yahoogroups.com
Asunto: [Repeater-Builder] Kenwood TKR-750 (VHF repeater)

 

  

Hello folks,

I have a TKR-850 operating as a UHF repeater and EchoLink/IRLP node. 
It works great!

I have a TKR-750 that I would like to put into service on a simplex 
frequency. The advertising literature and the service manual both 
state that it can be used on simplex using only one antenna, and I 
have set the programming to simplex rather than repeater.

However, I cannot find anything stating which antenna to use and/or 
what other cabling must be used, what other procedure to follow, or 
what other step must be taken.

Is it as simple as screwing the antenna coax into the TX connector?

The receiver works just fine, and I can hear strong local signals by 
alligator-clipping an antenna to the RX input. My next step is to 
alligator-clip an antenna to the TX input to see if I can receive as 
well there.

Does anybody have any experience with either of these (or similar 
units) that can point me to the proper procedure or documentation?

73 de Dave WB6KHP
San Jose
IRLP 3246 / EchoLink 525493

pushing sine wave energy through the atmosphere since 1965

--

dave6592 [at] accesscom [dot] com - http://www.accesscom.com/~dave6592
Dave Schultheis, San José, Silicon Valley, Santa Clara County, CA, USA





Re: [Repeater-Builder] Kenwood TKR-750 (VHF repeater)

2010-08-28 Thread Ken Arck
At 01:47 PM 8/28/2010, Juan Tellez wrote:


For simplex use, you have to have an external antenna relay.



-Yup. You need an external relay. Checkout RF Parts as they have 
fairly reasonably priced ones

Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
We don't just make 'em. We use 'em!



Re: [Repeater-Builder] Kenwood TKR-750 VHF repeater

2007-01-08 Thread panneer pcp
i want to purchase kenwood tkr750 verson 2 at low cost with warendy

  want deatails.
   
  
D Chubski [EMAIL PROTECTED] wrote:
Hello Tom.  I have several TKR-750 VHF Version 2 ( 136-150)  
repeaters or base stations.What information do you need?
   
  Dave
  PennCAP 4

Tom [EMAIL PROTECTED] wrote:
  Anyone have any experience with the versions 1 and 2 of this repeater 
and its programming?

NB2A
Tom




  __
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

 

 Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download 
Now! http://messenger.yahoo.com/download.php

[Repeater-Builder] Kenwood TKR-750 VHF repeater

2007-01-05 Thread Tom
Anyone have any experience with the versions 1 and 2 of this repeater 
and its programming?

NB2A
Tom



RE: [Repeater-Builder] Kenwood TKR-750 VHF repeater

2007-01-05 Thread Juan Tellez
What exactly do you want to know?

 

Juan

 

Asunto: [Repeater-Builder] Kenwood TKR-750 VHF repeater

 

Anyone have any experience with the versions 1 and 2 of this repeater 
and its programming?

NB2A
Tom

 



RE: [Repeater-Builder] Kenwood TKR-750 VHF repeater

2007-01-05 Thread Jeff Hunt / ICS Radio
Yes.

Jeff 

-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Tom
Sent: Friday, January 05, 2007 8:50 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Kenwood TKR-750 VHF repeater

Anyone have any experience with the versions 1 and 2 of this repeater and
its programming?

NB2A
Tom





Re: [Repeater-Builder] Kenwood TKR-750 VHF repeater

2007-01-05 Thread D Chubski
Hello Tom.  I have several TKR-750 VHF Version 2 ( 136-150)  repeaters or 
base stations.What information do you need?
   
  Dave
  PennCAP 4

Tom [EMAIL PROTECTED] wrote:
  Anyone have any experience with the versions 1 and 2 of this repeater 
and its programming?

NB2A
Tom



 

 __
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Re: [Repeater-Builder] Kenwood TKR-750 VHF repeater

2007-01-05 Thread Ken Arck
At 08:50 AM 1/5/2007, you wrote:

Anyone have any experience with the versions 1 and 2 of this repeater
and its programming?

---We are a Kenwood Dealer. What did you need to know?

Ken
--
President and CTO - Arcom Communications
Makers of the world famous RC210 Repeater Controller and accessories.
http://www.ah6le.net/arcom/index.html
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net



Re: [Repeater-Builder] Kenwood TKR-750 VHF repeater

2007-01-05 Thread k7pfj
Hi Tom,

What questions did you need to know on the Kenwood Repeaters. We are a Kenwood 
Dealer here on the West Coast area.

Mike Mullarkey K7PFJ
Silke Communications, Inc.
www.silkecom.com
541-687-1611 ext 103

-- Original message -- 
From: Tom [EMAIL PROTECTED] 
Anyone have any experience with the versions 1 and 2 of this repeater 
and its programming?

NB2A
Tom