K5In and I are looking for a couple of UHF Amplifier's that will have 10 to
25 watts in and 70 to 100 watts out. We would prefer n-connectors but will
accept other connectors.
Thanks,
Larry KC7CKO
...@yahoogroups.com] On Behalf Of Larry Watkinson
Sent: Monday, July 19, 2010 12:11 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Wanted - UHF Amplifier
K5In and I are looking for a couple of UHF Amplifier's that will have 10 to
25 watts in and 70 to 100 watts out. We would prefer n
Hi everyone!
I have been contacted by a group which is involved in a restoration
project at the Reagan Ranch and they are in need of a Motorola PT-400
for one of their artifacts. I looked through my own pile and all I have
left is a PT-500 which won't work for them.
So I promised that I would
Bought one several years ago from Kevin @ the Repeater-Builder booth in
Dayton. Works very well (~0.13 µV for 12 dB SINAD on the MVP it's in), but
now I need another one. Got another one, Kevin? If not, does anyone else?
BTW, I did the antenna-load sensitivity substitution test last night on
Looking for a spare Low-Band Receiver, 12 or 13 split.
Failing that, I'll take the whole mobile.
Anyone have one they want to part with ?
Thanks, Dick, W1KSZ
@yahoogroups.com
Subject: [Repeater-Builder] WANTED: MASTR II Low-Band Receiver
Looking for a spare Low-Band Receiver, 12 or 13 split.
Failing that, I'll take the whole mobile.
Anyone have one they want to part with ?
Thanks, Dick, W1KSZ
Dick,
I have two that I removed from a 10M transmitter I built. I am fairly
sure they are 12 split RX's. E-mail me privately if you are still in need.
Scott
n3xcc at repeater-builder.com
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Richard W. Solomon wrote:
Wanted: Parts list for Hamtronics R76 10 Meter Receiver
I know this is a shot in the dark, but I'm going
to ask anyway.
Does anyone here have a copy of the Hamtronics R76
VHF FM Receiver (low band) parts list (I have the
instructions) for the 10 Meter Band Version. Again
I only need the
Does JV at Hamtronics not have that info?
Doug
On 07/01/2010 16:33:41, skipp025 (skipp...@yahoo.com) wrote:
Wanted: Parts list for Hamtronics R76 10 Meter Receiver
I know this is a shot in the dark, but I'm going
to ask anyway.
Does anyone here have a copy of the Hamtronics R76
Its a little difficult as the alerts are time and Julian day specific.
http://www.circuitcellar.com/avr2006/winners/AT3249.htm
On Sun, Nov 22, 2009 at 9:16 PM, cracked crac...@n0de.org wrote:
I'm building/testing a DIY weather receiver/decoder and could use a couple
custom weather alerts to
At 08:16 PM 11/22/09, you wrote:
I'm building/testing a DIY weather receiver/decoder and could use a
couple custom weather alerts to inject into my service monitor. I
need the preamble/header code portion of the alert with a specific
FIP and Event codes. Anybody aware of a software-based
More on EAS:
http://www.defcon.org/images/defcon-16/dc16-presentations/defcon-16-flux.pdf
I'm building/testing a DIY weather receiver/decoder and could use a couple
custom weather alerts to inject into my service monitor. I need the
preamble/header code portion of the alert with a specific FIP and Event codes.
Anybody aware of a software-based generator? Another option would be
Hi guys,
I have been reading this list for a long time and now its time to take the
plunge.
I need to build a portable UHF repeater for my SAR team. So, I am looking for
a UHF MVP.
I will pay a reasonable price and shipping to Atlanta, 30317
I am looking forward to trying this and I will be
Anyone have a service manual for an IFR COM-120B? I am in need of a schematic
for the internal power supply module. IFR wants big bucks for a manual, and
Google searches have been fruitless.
Thanks
Eric
KE2D
Hi, I am new to the group so apologies if this is not what it was intended for.
I have just bought a replica Starsky and Hutch Ford Gran Torino and I am
looking for a single channel Motorola Micor just like the ones used in the TV
show (apparently). It will most likely just be for show, so as
Do you need a complete radio or just a control head and speaker for under the
dash? Do you care if the radio works?
wb5oxq
- Original Message -
From: littlejimmy74
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, November 04, 2009 7:51 AM
Subject: [Repeater-Builder
Looking for a (white) GE Versatone Network for MII/MVP on 82.5.
If you have one to sell please contact me either via the group or directly at
w6...@scdxc.org.
Thanks
Fred
...@scdxc.org wrote:
From: w6jll w6...@scdxc.org
Subject: [Repeater-Builder] Wanted: GE Versatone Network for 82.5
To: Repeater-Builder@yahoogroups.com
Date: Tuesday, October 6, 2009, 10:56 AM
Looking for a (white) GE Versatone Network for MII/MVP on
82.5.
If you have
Wanted
Someone to install 4, N connectors on 7/8ths hardline, before Sunday 13
Sept.
Location is Northern NJ.
We could possibly bring the Hard Line to you for the install.
Please contact Dave Hubbell 862.266.2339
Thanks in advance
Dave
I scanned the IFR1500 Application Notes a couple of months ago and
posted it to:
http://groups.yahoo.com/group/Repeater-Builder/files/IFR1500/
You may find this helpful. I'm interested in information about the
digital attenuator and LCD display that you have Was that and IFR
product or
-Original Message-
From: Repeater-Builder@yahoogroups.com [mailto:Repeater-
buil...@yahoogroups.com] On Behalf Of surf_boy82
Sent: Saturday, August 29, 2009 9:11 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Manual
Does anyone have
Thanks vy much for doing this, Joe. What a lot of work!
--John
--- On Sun, 8/30/09, Joe k1ike_m...@snet.net wrote:
From: Joe k1ike_m...@snet.net
Subject: Re: [Repeater-Builder] Wanted: IFR FM/AM 1500 Owners Manual
To: Repeater-Builder@yahoogroups.com
Date: Sunday, August 30, 2009, 6:14 AM
Does anyone have an owners manual for the IFR FM/AM 1500 that is surplus to
their needs? I've had one for quite a while and I'm familiar with most of it's
operation but wouldn't mind having the proper manuals for it. My unit has the
digital attenuator with LCD display on it.
Would prefer not
I have been unlucky with my Stabilock 4015 lately. First of all some may
ask why didn't you get a HP, and I will tell you that over here in
Europe HPs are just not nearly as widespread as in the US.
First the computer board was faulty and I finally sent the monitor to a
specialist in Germany for
Hi all,
I am in need of a 19D423249G1 board. I found out this is needed to make the PLL
exciter work on the lower end of the two meter band in the 145 range. This is
the Band-Pass board that plugs in the the GE Master II exciter.
I do NOT want the G2 board. My mistake.
73s
Steve W4SEF
Does anyone have some cans from a db4030 or db4032 duplxer ?
Just need a couple cans and harness
Thanks!
Chris
Kb0wlf
Hi Guys,
I've been reading up on
How to Modify a Sinclair Q2220E 132-174 MHz Duplexer to 220 MHz
as Dave C has done.
Where/who supplies these connectors..
73 John
VK4JKL IRLP 6163
how many do you need ?
On Fri, Apr 10, 2009 at 2:52 AM, jgielis jgie...@westnet.com.au wrote:
Hi Guys,
I've been reading up on
How to Modify a Sinclair Q2220E 132-174 MHz Duplexer to 220 MHz
as Dave C has done.
Where/who supplies these connectors..
73 John
VK4JKL IRLP 6163
I've been reading up on
How to Modify a Sinclair Q2220E 132-174 MHz Duplexer to 220 MHz
as Dave C has done.
Where/who supplies these connectors..
73 John
VK4JKL IRLP 6163
Delta Electronics - www.deltarf.com
http://www.deltarf.com/results/p60.pdf
--- Jeff WN3A
I'm looking for a couple of MSR2000 UHF receivers, in the 450~470 MHz split
(will be used at 440.750).
I might also be interested in one (1) in the 470~512 split if the price is
right, since I have a 450~470 MHz helical filter assembly from a hopelessly
dead UHF receiver and I guess I can do
Does anyone have an old PCRC II Personal Computer Repeater Controller board
they are willing to part with? I need to replace an existing PCRC II
installation hit by lightning. Software not required, but I am willing to
provide a copy(along with a scanned PDF copy of the manual) to anyone that
WANTED:
Does anyone have a copy of the Cushman Application Note on Duplexer
Tuning using the CE-50A, CE-5100 and CE-5110? This is similar to
the Cushman Application Notes:
CE50A_SERIES_PART_1_TRANSMITTERS.pdf (3.2mB)
CE50A_SERIES_PART_2_RECEIVERS.pdf (3.5mB)
@yahoogroups.com
Subject: Re: [Repeater-Builder] WANTED: exec II desktop
I have a few, all 100% working, clean. uhf and vhf, 50.00 each, plus
shipping. (desk models)
Lance N2HBA
- Original Message -
From: Chris Curtis mailto:demo...@rollanet.org
To: Repeater-Builder@yahoogroups.com
So, does anyone have a handful of coax assemblies they took out of mastr II
mobiles?
You know, the phono to so-239 bits?
OR, what's the consensus on adding the rx port in a conversion?
Thanks for your time.
Chris
Kb0wlf
are
available from The RF Connection.
Chuck
WB2EDV
- Original Message -
From: Chris Curtis demo...@rollanet.org
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 07, 2009 7:34 PM
Subject: [Repeater-Builder] WANTED: mastr II mobile coax assemblies
So, does anyone have a handful of coax
At 3/7/2009 16:34, you wrote:
So, does anyone have a handful of coax assemblies they took out of mastr II
mobiles?
You know, the phono to so-239 bits?
OR, what's the consensus on adding the rx port in a conversion?
The Mastr II mobile has never been my favorite for repeater conversions, as
I
, 2009 6:47 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WANTED: mastr II mobile coax assemblies
I do not believe that any of these cable assemblies utilize double shielded
coax. If someone knows differently, please let the group know.
Personally, I'd use some RG-400 silver
Chris Curtis wrote:
Ok, so I also could use some heliax.
Now, I understand fsj is the flexi but is it really that bad to install from
antenna to shack?
The reason I ask is there is some fsj4 on ebay. No ldf in any considerable
length.
I was looking at ldf1 but got quoted 1.25 a foot
, 2009 4:23 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WANTED: exec II desktop
I have a few, all 100% working, clean. uhf and vhf, 50.00 each, plus
shipping. (desk models)
Lance N2HBA
- Original Message -
From: Chris Curtis mailto:demo...@rollanet.org
How goes it everyone?
Chris, kb0wlf here.
I'm looking for Exec II desktop or wall mount radios.
I'd like a vhf-lo, vhf-hi, and a uhf.
Preferably, of course, INEXPENSIVE.
=]
Putting together a system with 6m/2m repeaters and a 70cm remote base.
After reading the repeater building checklist, I
Ok, so I also could use some heliax.
Now, I understand fsj is the flexi but is it really that bad to install from
antenna to shack?
The reason I ask is there is some fsj4 on ebay. No ldf in any considerable
length.
I was looking at ldf1 but got quoted 1.25 a foot vs 190.00 for 250' of fsj4.
Try this websitehttp://www.surpluscoax.com/
Little differnce in FSJ$ and LDF4 other then slight change in loss value and
smaller min. bend radius for the FSJ. Big difference between LDF1 and FSJ4
size and loss figures.
--
Doug
N3DAB/WPRX486/WPJL709
Chris Curtis
For heliax at 'make offer' prices, check the equipment for sale listings
on the GNARC.org web page. This is good quality and some have
connectors already mounted. Shipping will be a problem Good
luck. It is good stuff especially for VHF and UHF
73
Curt W1FSM
Chris Curtis wrote:
: Re: [Repeater-Builder] WANTED: heliax
For heliax at 'make offer' prices, check the equipment for sale listings
on the GNARC.org web page. This is good quality and some have
connectors already mounted. Shipping will be a problem Good
luck. It is good stuff especially for VHF and UHF
I have a few, all 100% working, clean. uhf and vhf, 50.00 each, plus shipping.
(desk models)
Lance N2HBA
- Original Message -
From: Chris Curtis
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 24, 2009 2:32 PM
Subject: [Repeater-Builder] WANTED: exec II desktop
@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chris Curtis
Sent: Tuesday, February 24, 2009 5:13 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] WANTED: heliax
I appreciate the tips on where to find the stuff.
Does anyone have an opinion
: RE: [Repeater-Builder] WANTED: heliax
I really don't like using Superflex (FSJ) outdoors. The jacket on FSJ is
much thinner than it is on LDF, making it easier to get water in due to a
small nick. Also, the corrugation on FSJ is helical (spiral), whereas LDF
is annular (rings). The helical
Chris,
I'd use LDF for the long run, and FSJ for jumpers. Also, you'll need a
short jumper of RG-213, 9914, or similar at the antenna end to allow you to
rotate the beam(s). I don't think the FSJ is meant to be *THAT* flexible.
FWIW - I run 1/2 Heliax to my 2m/70cm stick at the top of my
...@yahoogroups.com] On Behalf Of Mark
Sent: Tuesday, February 24, 2009 5:43 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] WANTED: heliax
Chris,
I'd use LDF for the long run, and FSJ for jumpers. Also, you'll need a
short jumper of RG-213, 9914, or similar at the antenna end
I posed this question to Tessco a few years ago regarding the use of FSJ
cable outdoors. Evidently there were concerns years ago regarding the
use of FSJ, or Superflex cables for antenna jumpers. I was assured that
any past problems have been resolved. I never verified this with the
-Builder] WANTED: heliax
For heliax at 'make offer' prices, check the equipment for sale listings
on the GNARC.org web page. This is good quality and some have
connectors already mounted. Shipping will be a problem Good
luck. It is good stuff especially for VHF and UHF
73
Curt W1FSM
Not sure if everyone here knows what I'm talking about, but I was
given a SpectraCom Netclock/2 time frequency standard at work, and I
need the WWVB Croquet Mallet antenna for it. This is an active
antenna designed to work with the Spectracom Netclock/2 product.
Those in commercial radio should
Anyone have an RLC-3 surplus to their needs for sale?
Any configuration... From 1 port to 8 ports.
Please e-mail me directly (surf_bo...@yahoo.com) with configuration
and asking price.
Thanks!
Chris
hi gang. mdm here.
i have a macaroni 2955 with a smoked flyback xfmr. repair shop can't find the
part. someone must have a spare or a parts chassis somewhere. and help
appreciaed greatly. this is a pristine monitor and i'd really like to get it
fixed for my shop.
thanks
mdm ted
thawing out
@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ted Bleiman K9MDM -
MDM Radio
Sent: Monday, February 09, 2009 3:07 AM
To: repeater-builder@yahoogroups.com; motorola-u...@yahoogroups.com
Subject: [Repeater-Builder] wanted- macaroni fly back xfmr
hi gang. mdm here.
i have a macaroni
Hello All,
Thanks for all of you that replied to my original email.
I already know what I need, and what I need to do. Thanks.
However nobody addressed the subject of WANTED.
So, here it is again
WANTED... In Need of to install
I am a looking for a preamp to go on the WR6ABD 2 meter
Call Chip at AngleLinear and be done with it. You'll never regret it
Ken
At 05:32 PM 1/29/2009, Scott Avery wrote:
Hello All,
Thanks for all of you that replied to my original email.
I already know what I need, and what I need to do. Thanks.
However nobody addressed the subject of WANTED.
(off this
reflector) if interested.
Gary
N6LRV
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott
Avery
Sent: Thursday, January 29, 2009 5:32 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Wanted 2 Meter Preamp
Anyone have one out there?
Joe
Actually I have one, was just thinking about selling it, nothing fancy,
controler, transmitter, recieve,duplexors, antenna. I am actually into it a
little heavy though, and would have to go back and look to give you a price. I
have manuals for everything also.
-- Original Message
-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WANTED:222Mhz repeater
Actually I have one, was just thinking about selling it, nothing fancy,
controler, transmitter, recieve,duplexors, antenna. I am actually into it a
little heavy though, and would have to go back and look to give you
I have several sets of Telewave pass/reject duplexers (built from cavities
taken from 220 combiners). See http://www.telewave.com/pdf/TWDS-6026.pdf.
I don't have the rack-mount brackets however.
Also I have Sinclair and Telewave 220 cavities, window filters, isolators,
etc.
Email direct if
Anybody have a CSI CD-2 they would like to sell?
http://www.connectsystems.com/products/specs/CD2_LT2.pdf
If so, please drop me a line at n...@qx.net
Thanks - Bill
Hi Group,
Just checking in to see if anyone out there in repeater land has any
old Palomar Telecom equipment they are no longer using that they may
want to sell. I am looking for any old controllers, cards, voice
boards, back planes, card cages, ANYTHING Palomar Telecom. Even
un-built cards or
Looking to purchase a Vertex VXR-5000 UHF in perfect working condition.
Please e-mail or simply call:
[EMAIL PROTECTED]
518-653-1287
Does anyone have a single cavity for a Wacom WP678 that they would like
to sell?
If so, please eith e-mail direct or simply call...
Len [EMAIL PROTECTED]
518-653-1287
Hello to all and thanks for reading.
I am looking to buy your unwanted Hamtronics R302 receiver for a 2
meter ham application. Would prefer a working radio, but will consider
all, as long as it hasn't been fried by lightning. Please state price
and condition in first email.
Thanks, Howard
Wanted:
Motorola KLN6709 141.3Hz 4A reeds. The more the better.
Need 6709s. Have plenty of the others. Have other tones to trade also.
Eric
KE2D
I am trying to find a couple of VHF Mitreks for convertion to repeater
use and am having difficulty finding them locally.
I have checked a few websites with no success, and am looking for
suggestions on other websites that might offer these at surplus prices.
Any advice appreciated.
73 de
Hello All
I have acquired a FM exciter board recently without a ICOM on board.
Does anybody out there have a ICOM for the UHF FM exciter to sell? I believe
the part
numbers are:
19A130605G11 5C
19A130605G4 2C
Thanks
Mark Hagler
KK7U Seattle
I have a need for a cheap 2-port controller for a commercial repeater
project. One repeater and one link port.
Before I go order a new CAT 200, does anyone on the list have something
similar that they're looking to get rid of?
Thanks
Eric
KE2D
] On Behalf Of kk2ed
Sent: Wednesday, September 24, 2008 4:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Wanted: 2-port controller
I have a need for a cheap 2-port controller for a commercial repeater
project. One repeater and one link port.
Before I go order a new CAT 200
I'm working on a few projects and need a number of N female flange
mount style connectors, crimp style for RG58/142/400u cable. Similar
to those found on the side of MSF5000 cabinets. Amphenol part # 082-
5372. Anyone have any?
Have any of you folks recently needed to refresh your shop stock
on the 213 connectors and it will not fit over two layers.
Been there, done that.
Any problem with buying RF Connectors from places like hdcom?
Bob M.
==
--- On Thu, 9/11/08, kk2ed [EMAIL PROTECTED] wrote:
From: kk2ed [EMAIL PROTECTED]
Subject: [Repeater-Builder] wanted: N-female flange
Please e-mail me directly at:
[EMAIL PROTECTED]
Thanks...
Anyone have a 146 MHz circulator/isolator for sale that will handle 70w?
Please respond off list.
Royce - W3IF
Hello all:
I am looking to buy or trade for (see end of this message) a working GE
MASTR II 12VDC power supply ( #PL19D43027262) and a GE MASTR II 110W
output REPEATER DUTY vhf RF Amplifier. I have one complete MOTOROLA RT
upright 6' 400w VHF Hi-Band repeater system and another complete
]
Date: Wed, 11 Jun 2008 21:20:24 -0700
Subject: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or
equivalent for radio programmming
Good evening everyone,
Subject says it all. Thought I had one lined up but the
seller flaked. Need a CF-25 Toughbook or equivalent to program
:
mailto:sacramento.cyclist%40gmail.com[EMAIL PROTECTED]
Date: Wed, 11 Jun 2008 21:20:24 -0700
Subject: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or
equivalent for radio programmming
Good evening everyone,
Subject says it all. Thought I had one lined up but the
seller flaked. Need
%40gmail.commailto:sacramento.cyclist%40gmail.com[EMAIL
PROTECTED]
Date: Wed, 11 Jun 2008 21:20:24 -0700
Subject: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or
equivalent for radio programmming
Good evening everyone,
Subject says it all. Thought I had one lined up
: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or
equivalent for radio programmming
Good evening everyone,
Subject says it all. Thought I had one lined up but the
seller flaked. Need a CF-25 Toughbook or equivalent to program my
MT-1000 and Spectras
) and run things there
.
To: Repeater-Builder@yahoogroups.com
From: [EMAIL PROTECTED]
Date: Fri, 13 Jun 2008 10:07:16 -0700
Subject: Re: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or
equivalent for radio programmming
Thank you all for the advice
Good evening everyone,
Subject says it all. Thought I had one lined up but the
seller flaked. Need a CF-25 Toughbook or equivalent to program my
MT-1000 and Spectras.
Let me know what you've got plus shipping to 95608.
Thanks! Dennis
--
Dennis L. Wade
KG6ZI
Carmichael,
Try Rick with Comcell Communications, 928-279-6251.
On 6/11/08, Dennis Wade [EMAIL PROTECTED] wrote:
Good evening everyone,
Subject says it all. Thought I had one lined up but the
seller flaked. Need a CF-25 Toughbook or equivalent to program my
MT-1000 and Spectras.
Subject says it all. Thought I had one lined up but the
seller flaked. Need a CF-25 Toughbook or equivalent to program my
MT-1000 and Spectras.
Does it NEED to be a toughbook? I got nice results with DOS programs and
the HP 1000CX (a trimmed-down version of the HP200LX). Why
Doesn't the machine just need a suitable port and speed ? , the toughbook isn't
a must ?
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED];
Repeater-Builder@yahoogroups.com
From: [EMAIL PROTECTED]
Date: Wed, 11 Jun 2008 21:20:24 -0700
Subject: [Repeater-Builder] Wanted to buy
At 02:53 PM 6/12/2008, Barry C' wrote:
Doesn't the machine just need a suitable port and speed ? , the
toughbook isn't a must ?
---I use a new generation Athlon based laptop (3800) which I boot
directly to DOS and have no problem at all with RSS for the MSF5000 at least.
Ken
-Builder] Wanted to buy: Panasonic CF-25 laptop or
equivalent for radio programmming
At 02:53 PM 6/12/2008, Barry C' wrote:
Doesn't the machine just need a suitable port and speed ? , the
toughbook isn't a must ?
---I use a new generation Athlon based laptop (3800) which I
]; Repeater-Builder@yahoogroups.com
From: [EMAIL PROTECTED]
Date: Wed, 11 Jun 2008 21:20:24 -0700
Subject: [Repeater-Builder] Wanted to buy: Panasonic CF-25 laptop or
equivalent for radio programmming
Good evening everyone,
Subject says it all. Thought I had one lined up but the
seller flaked
I very often can find heliax jumpers with N connectors on Ebay. Some with
M-M and some M-F.
Looked last night and a number of 5 foot cables readily available.
Also, one can try:
http://www.surpluscoax.com/index.html for good deals on heliax and
connectors.
Not that hard to make
List,
At Dayton I saw a pile of new 4-5 feet long N-male to N-Female low loss
jumbers for feedline end jumper connections. At the time I didn't think
to pick up a couple. However, now that I'm home I realize my need. My
repeater is 900MHz Maxtrac based using a 150W Motorola Cell site amp.
Does
Chuck,
I have a few, got all at Hamfest, but I want to keep.
I see these all the time...at least at the larger fest. I have 15 ft
1/2 heliax and RG214 cables with good N-connectors. Some of the
connectors don't look so good to the typical Ham, but that is because
they are silver and
you need any?
thank you John
- Original Message -
From: w4dg.geo
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 24, 2008 7:30 PM
Subject: [Repeater-Builder] Wanted to buy - MICOR TPN1110B
Wanted to buy - MICOR TPN1110B 12v/25A rack mount PS. Please reply off list
to an Astron it is worth it. I do like Astron
supplies.
73, ron, n9ee/r
From: w4dg.geo [EMAIL PROTECTED]
Date: 2008/03/24 Mon PM 06:30:09 CDT
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Wanted to buy - MICOR TPN1110B
Wanted to buy - MICOR TPN1110B 12v/25A rack mount
Anyone have a Com-spec TS-64 encoder-decoder module? I'm looking for a
couple for a on-going project. Contact off-list with price
[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] . TNX 73 Dennis -
W4DG
Com-spec has all kinds of them. They will be happy to
sell them to you just like they sold one to me.
On Tue, 25 Mar 2008 21:21:12 -
w4dg.geo [EMAIL PROTECTED] wrote:
Anyone have a Com-spec TS-64 encoder-decoder module?
I'm looking for a
couple for a on-going project. Contact
Get the TS64DS which has the dip switch. Cost couple $ more, but worth it.
AES also carries them.
73, ron, n9ee/r
From: [EMAIL PROTECTED]
Date: 2008/03/25 Tue PM 04:16:06 CST
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WANTED: Com-spec TS-64 encoder/decoder
Wanted to buy - MICOR TPN1110B 12v/25A rack mount PS. Please reply off
list to [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] . 73 Dennis
- W4DG
I am looking for a used crossband coupler,
Either model
TX/RX 80-05-06.
Telewave TS-1545
DCI Model DCI-146/444-DX-DB
If anyone has one used unit in good shape for sale, please contact me.
Thank you kindly,
[EMAIL PROTECTED]
1 - 100 of 294 matches
Mail list logo