The FCC ID is band dependent. The manual has a table on ranges and that
includes the FCC IDs
John Sehring wrote:
I haven't had much luck locating low band, low split Maxtrac's for use
on 10m.
These radios' model numbers don't tell what split it is; you have to
crack open the radio,
manual are you referring to, Motorola or
an FCC thing? I do have pretty much complete Maxtrac
paperwork, thanks to the guys at Repeater Builder.
--- On Mon, 8/31/09, Rich Osman
li...@ozindfw.net mailto:lists%40ozindfw.net wrote:
From: Rich Osman li...@ozindfw.net mailto:lists
John,
Get the preamp out of the circuit and **powered down.** Preamps will
take any desense probelm and will make them worse - usually at twice
the value of their gain.
Do a 'binary search' - Start by getting it to work without stuff.
Disconnect the antenna and feedline and put a dummy load
John,
Some comments and observations;
Moving a 30 or 40 year old might radio invalidate the fact that it was
working at the other site.
Duplexers, particularly 'vintage' duplexers don't always travel well.
This is particularly true when the person doing the alignment forgets to
run the locking
Except that you need to despread the pilot. The good news is that some
companies make saw correlators for the pilot. Bit of work regardless.
DCFluX wrote:
I think AM stations have tighter frequency requirements. I think I
read some where it was supposed to be + or - 5 hz, of course that
Hard for me to understand how you can have an H field and no E field.
JOHN MACKEY wrote:
that's what I was thinking, it has to be RF.
-- Original Message --
Received: Sun, 06 Sep 2009 04:07:09 PM PDT
From: Ted Leonard n2...@verizon.net mailto:n2isq%40verizon.net
To:
That's why base stations have 250 - 300w where mobiles are 100.
On 07/05/2010 12:20 PM, Chuck Kelsey wrote:
Jim -
My experience with 6-FM is that you are going to have a much harder
time hearing the repeater than getting in to it. The noise encountered
in a mobile environment
On 08/08/2010 08:09 PM, n3ssl wrote:
Glenn, OZ and group
Its a step jump 5 khz up and get - 200 hz of crystal movment. What
silver mica Cap is it? I have not looked inside a channel element in
years usally send them out and trust the mfg.
I also gave the crystal movement a thought but
8 matches
Mail list logo