Re: add rsync -A -X to Backuppc RsyncArgs get 'Got fatal error during xfer (fileListReceive failed)'
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Both systems would need to have an rsync installed that support those features. They are a compile time choice and are automatically disabled if dependencies aren't met. You can see if they are supported with 'rsync --version'. If they are supported that will list both ACLs and xattrs. The filesystems must also support them of course. On 06/25/2015 08:11 AM, Bob of Donelson Trophy wrote: Backuppc uses rsync (do not know what rsync version but Backuppc is latest version, so assuming 'very' current rsync version is included) and I am trying to add acl and attr file permissions to rsync in RsyncArgs and RsyncRestoreArgs and have discovered that their addition is not that easy. Backuppc uses RsyncArgs and RsyncRestoreArgs to create the rsync 'string' of commands to backup files. By adding the -A and -X to the RsyncArgs list. When backups are run the log files contains: Got fatal error during xfer (fileListReceive failed). Removing the -A and the -X allows the backup to proceed without errors. Is there another 'switch' that needs to be added to allow the -A and -X to function without error? Anyone familiar with including acl and attr file permissions during rsync backup (and restore.)? -- -- - -- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com http://www.donelsontrophy.com Everyone deserves an award!! - -- ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ Kevin Korb Phone:(407) 252-6853 Systems Administrator Internet: FutureQuest, Inc. ke...@futurequest.net (work) Orlando, Floridak...@sanitarium.net (personal) Web page: http://www.sanitarium.net/ PGP public key available on web site. ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ -BEGIN PGP SIGNATURE- Version: GnuPG v2 iEYEARECAAYFAlWMD44ACgkQVKC1jlbQAQeWYACgs05rQId1H6Kdo6sT/2UhzXVR KyMAmgNuczfMTXt1ZQ0/LPowI7N0QAG0 =Q5ti -END PGP SIGNATURE- -- Please use reply-all for most replies to avoid omitting the mailing list. To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
Re: add rsync -A -X to Backuppc RsyncArgs get 'Got fatal error during xfer (fileListReceive failed)'
Thanks for your advice. I'll go back and read up on the options again. --- - Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] Everyone deserves an award!! On 2015-06-25 09:41, Kevin Korb wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The command line order shouldn't matter though that might depend on what else is in there (especially -s). Rsync is backwards compatible so the version mismatch shouldn't matter but 3.1 has some nice benefits over 3.0.9 so upgrading is a good idea. In the end you probably need to know what rsync command line is being run and what rsync says about it. If BackupPC doesn't tell you then try running rsync yourself. On 06/25/2015 10:37 AM, Bob of Donelson Trophy wrote: Thank you. This helps get me closer. One machine shows rsync 3.0.9 and the other shows rsync 3.1.0. Running rsync --version both show ACL, xattr are supported. Two questions, would the two different version cause it to fail? Second, does the order rsync receives the switches matter. Does -A and -X need to be near the beginning of the 'string' command? (I hope you get what I am asking, the order in which options are listed.) --- -- - -- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] http://www.donelsontrophy.com [1] Everyone deserves an award!! On 2015-06-25 09:26, Kevin Korb wrote: Both systems would need to have an rsync installed that support those features. They are a compile time choice and are automatically disabled if dependencies aren't met. You can see if they are supported with 'rsync --version'. If they are supported that will list both ACLs and xattrs. The filesystems must also support them of course. On 06/25/2015 08:11 AM, Bob of Donelson Trophy wrote: Backuppc uses rsync (do not know what rsync version but Backuppc is latest version, so assuming 'very' current rsync version is included) and I am trying to add acl and attr file permissions to rsync in RsyncArgs and RsyncRestoreArgs and have discovered that their addition is not that easy. Backuppc uses RsyncArgs and RsyncRestoreArgs to create the rsync 'string' of commands to backup files. By adding the -A and -X to the RsyncArgs list. When backups are run the log files contains: Got fatal error during xfer (fileListReceive failed). Removing the -A and the -X allows the backup to proceed without errors. Is there another 'switch' that needs to be added to allow the -A and -X to function without error? Anyone familiar with including acl and attr file permissions during rsync backup (and restore.)? -- --- - -- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] http://www.donelsontrophy.com [1] http://www.donelsontrophy.com [1] Everyone deserves an award!! - -- ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ Kevin Korb Phone: (407) 252-6853 Systems Administrator Internet: FutureQuest, Inc. ke...@futurequest.net (work) Orlando, Florida k...@sanitarium.net (personal) Web page: http://www.sanitarium.net/ [2] PGP public key available on web site. ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ -BEGIN PGP SIGNATURE- Version: GnuPG v2 iEYEARECAAYFAlWMEx8ACgkQVKC1jlbQAQcHlwCgwlGRwThtE8b3nffNB+Iszd2n u04An3adls8wW6WHYEpsIMAVlP7ifH42 =LG0u -END PGP SIGNATURE- Links: -- [1] http://www.donelsontrophy.com [2] http://www.sanitarium.net/ -- Please use reply-all for most replies to avoid omitting the mailing list. To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
Re: add rsync -A -X to Backuppc RsyncArgs get 'Got fatal error during xfer (fileListReceive failed)'
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The command line order shouldn't matter though that might depend on what else is in there (especially -s). Rsync is backwards compatible so the version mismatch shouldn't matter but 3.1 has some nice benefits over 3.0.9 so upgrading is a good idea. In the end you probably need to know what rsync command line is being run and what rsync says about it. If BackupPC doesn't tell you then try running rsync yourself. On 06/25/2015 10:37 AM, Bob of Donelson Trophy wrote: Thank you. This helps get me closer. One machine shows rsync 3.0.9 and the other shows rsync 3.1.0. Running rsync --version both show ACL, xattr are supported. Two questions, would the two different version cause it to fail? Second, does the order rsync receives the switches matter. Does -A and -X need to be near the beginning of the 'string' command? (I hope you get what I am asking, the order in which options are listed.) --- -- - -- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com http://www.donelsontrophy.com Everyone deserves an award!! On 2015-06-25 09:26, Kevin Korb wrote: Both systems would need to have an rsync installed that support those features. They are a compile time choice and are automatically disabled if dependencies aren't met. You can see if they are supported with 'rsync --version'. If they are supported that will list both ACLs and xattrs. The filesystems must also support them of course. On 06/25/2015 08:11 AM, Bob of Donelson Trophy wrote: Backuppc uses rsync (do not know what rsync version but Backuppc is latest version, so assuming 'very' current rsync version is included) and I am trying to add acl and attr file permissions to rsync in RsyncArgs and RsyncRestoreArgs and have discovered that their addition is not that easy. Backuppc uses RsyncArgs and RsyncRestoreArgs to create the rsync 'string' of commands to backup files. By adding the -A and -X to the RsyncArgs list. When backups are run the log files contains: Got fatal error during xfer (fileListReceive failed). Removing the -A and the -X allows the backup to proceed without errors. Is there another 'switch' that needs to be added to allow the -A and -X to function without error? Anyone familiar with including acl and attr file permissions during rsync backup (and restore.)? -- --- - --- - -- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com http://www.donelsontrophy.com http://www.donelsontrophy.com Everyone deserves an award!! - -- ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ Kevin Korb Phone:(407) 252-6853 Systems Administrator Internet: FutureQuest, Inc. ke...@futurequest.net (work) Orlando, Floridak...@sanitarium.net (personal) Web page: http://www.sanitarium.net/ PGP public key available on web site. ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ -BEGIN PGP SIGNATURE- Version: GnuPG v2 iEYEARECAAYFAlWMEx8ACgkQVKC1jlbQAQcHlwCgwlGRwThtE8b3nffNB+Iszd2n u04An3adls8wW6WHYEpsIMAVlP7ifH42 =LG0u -END PGP SIGNATURE- -- Please use reply-all for most replies to avoid omitting the mailing list. To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
Re: add rsync -A -X to Backuppc RsyncArgs get 'Got fatal error during xfer (fileListReceive failed)'
Thank you. This helps get me closer. One machine shows rsync 3.0.9 and the other shows rsync 3.1.0. Running rsync --version both show ACL, xattr are supported. Two questions, would the two different version cause it to fail? Second, does the order rsync receives the switches matter. Does -A and -X need to be near the beginning of the 'string' command? (I hope you get what I am asking, the order in which options are listed.) --- - Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] Everyone deserves an award!! On 2015-06-25 09:26, Kevin Korb wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Both systems would need to have an rsync installed that support those features. They are a compile time choice and are automatically disabled if dependencies aren't met. You can see if they are supported with 'rsync --version'. If they are supported that will list both ACLs and xattrs. The filesystems must also support them of course. On 06/25/2015 08:11 AM, Bob of Donelson Trophy wrote: Backuppc uses rsync (do not know what rsync version but Backuppc is latest version, so assuming 'very' current rsync version is included) and I am trying to add acl and attr file permissions to rsync in RsyncArgs and RsyncRestoreArgs and have discovered that their addition is not that easy. Backuppc uses RsyncArgs and RsyncRestoreArgs to create the rsync 'string' of commands to backup files. By adding the -A and -X to the RsyncArgs list. When backups are run the log files contains: Got fatal error during xfer (fileListReceive failed). Removing the -A and the -X allows the backup to proceed without errors. Is there another 'switch' that needs to be added to allow the -A and -X to function without error? Anyone familiar with including acl and attr file permissions during rsync backup (and restore.)? -- -- - -- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] http://www.donelsontrophy.com [1] Everyone deserves an award!! - -- ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ Kevin Korb Phone: (407) 252-6853 Systems Administrator Internet: FutureQuest, Inc. ke...@futurequest.net (work) Orlando, Florida k...@sanitarium.net (personal) Web page: http://www.sanitarium.net/ [2] PGP public key available on web site. ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._., - -*~ -BEGIN PGP SIGNATURE- Version: GnuPG v2 iEYEARECAAYFAlWMD44ACgkQVKC1jlbQAQeWYACgs05rQId1H6Kdo6sT/2UhzXVR KyMAmgNuczfMTXt1ZQ0/LPowI7N0QAG0 =Q5ti -END PGP SIGNATURE- Links: -- [1] http://www.donelsontrophy.com [2] http://www.sanitarium.net/ -- Please use reply-all for most replies to avoid omitting the mailing list. To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
