--- On Wed, 5/13/09, Nicolas Martin wrote:
> Dunno if you still own your ImageClass device, but as you
> were more
> expert than me on this part of the pixma backend, I
> naturally dare
> proposing you, if you can, to have a quick look at what's
> going on
> here.
Yup, still have it and I happe
There seems to be a disconnect on support status for the MF4010/MF4018.
These 3 seem to lack consensus:
http://www.nabble.com/Canon-MF4018-works-with-pixma-backend-td22935035.html
http://www.sane-project.org/sane-mfgs.html#Z-CANON
http://www.sane-project.org/man/sane-pixma.5.html
-Dennis
Steve Hardy wrote:
>I have similar problems to this with the pixma backend and a Canon MF4660 -
>only my MFP *always* returns the -ETIMEOUT response after moving the scan
>head to the end of the panel in preparation for the scan.
If you keep reading, Gleb solved his problem by manually removing
From: Bob Dronski
>Thanks so much for all your help. I'm thrilled to say that the
>scanner works after a new build of both libusb and Sane! There are a
>couple of issues that still occur, but basically, it works.
Great! The next question is: was the USB PID in the mp730 code or the
imagec
Nicolas,
I told Bob to move the USB PID macro and device entry from pixma_imageclass.c
to pixma_mp730.c and see if that works.
He did that but then he wasn't able to see the scanner any more. Any ideas?
-Dennis
- Original Message
From: Bob Dronski
To: Dennis Lou
Cc: sane-dev
>From: Bob Dronski
>Just wondering if any progress has been made and/or if I can do
>anything else to help the progress on the MF-4150? My two week return
>window has closed, so I'm just crossing my fingers that something will
>happen.
I guess you didn't get my email (again). I looked at
From: Daniel Stender
>Canon "i-sensys" MF4140 multifunctional laserfax works at the end.
>
>PC, Debian Lenny, Sane-Backports 1.1.0, driver pixma,
>
>sane-fine-scanner:
>found USB scanner (vendor=0x04a9 [Canon Inc.], product=0x26a3 [MF4100]) at
>libusb:006:006
>
>scanimage -L:
>device `pixma:04A9
74
- Original Message
From: Bob Dronski
To: Dennis Lou
Sent: Saturday, August 23, 2008 1:20:22 PM
Subject: Re: [sane-devel] Canon MF4140
Got a couple more. 150dpi color from the bottom of the scan and 300 dpi b/w
along the left edge.
This enough to get you started?
bob
Hi Bob,
I sent you a private email regarding this but apparently you didn't get it.
I wrote the Imageclass section and Allan is correct. Your all-in-one shares the
same Windows front-end stuff from Canon as mine. But beyond that, I have no
idea whether the base USB communications protocol is t
FYI, I managed to scrape together a spare machine for testing and the patch
works fine here.
-Dennis
- Original Message
From: Sam Varshavchik
To: Dennis Lou
Cc: Nicolas ; mrsam-guest ; sane-devel
Sent: Wednesday, June 25, 2008 3:20:22 PM
Subject: Re: [sane-devel] Problem with libusb
ing usb stack. It's also possible,
but probably less likely than Sam's concern. Which to implement depends on how
paranoid you are about the behavior of the device and libusb.
-Dennis
- Original Message
From: Sam Varshavchik
To: Nicolas
Cc: Dennis Lou ; mrsam-guest ; sane
e me a few days to rebuild my
sane development environment and confirm.
My recollection of the USB spec is a bit hazy, but 64bit libusb behavior
doesn't seem correct to me.
-Dennis
- Original Message
From: Nicolas
To: Dennis Lou
Cc: mrsam-guest at alioth.debian.org; sane-devel
I did a bit of detective work and dug up the USB ID's for the MF4010, MF4600
and MF6500.
-Dennis
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.c
I/O and code cleanup, plus a plea for USB ID's,.
-Dennis
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
---
22, 2008 10:29:39 AM
Subject: Re: [sane-devel] Canon imageClass MFP's
Or perhaps: PIXMA_CAP_ADF_AND_ADFDUP ...
Anyway, let me know if you have any code update to perform.
Nicolas
Dennis Lou wrote:
>
> From: nicols
>>Should we probably change also its name to sthg more exp
()
>change proposed for the ?free? issue?
Not yet. Everything is working fine right now, so I'll probably get to it
during some code cleanup.
-Dennis
Dennis Lou wrote:
>
> Regarding the ADF duplex issue, this line l
e_map[i] = PIXMA_SOURCE_ADFDUP;
-Dennis
- Original Message ----
From: Nicolas
To: Dennis Lou
Cc: sane-devel
Sent: Sunday, April 20, 2008 2:37:45 AM
Subject: Re: [sane-devel] Canon imageClass MFP's
Hi Dennis,
Thanks for the work on the ImageClass backend, I've just browsed
the cod
.
- Regarding ADF duplex, yes I see it show up in Xsane as well.
-Dennis
- Original Message
From: Nicolas
To: Dennis Lou
Cc: sane-devel
Sent: Sunday, April 20, 2008 2:37:45 AM
Subject: Re: [sane-devel] Canon imageClass MFP's
Hi Dennis,
Thanks for the work on the ImageClass backend,
sted in the Windows
driver are completely untested.
-Dennis
- Original Message ----
From: Nicolas
To: Dennis Lou
Cc: sane-devel at lists.alioth.debian.org
Sent: Thursday, April 17, 2008 2:31:44 PM
Subject: Re: [sane-devel] Canon imageClass MFP's
Yep, after having a look at the log file you
ending snoop logs in a separate email shortly.
-Dennis
- Original Message
From: Nicolas
To: Dennis Lou
Cc: sane-devel at lists.alioth.debian.org
Sent: Thursday, April 17, 2008 1:12:09 PM
Subject: Re: [sane-devel] Canon imageClass MFP's
Hi,
Currently maintaining the pixma backend
Hi,
I recently acquired a Canon imageClass MF4270 and am interested in contributing
a sane backend for it. This is my progress so far:
+Examined Windows driver package. Found references to:
--Canon MF5650
--Canon MF5630
--Canon MF3110
--Canon MF8100
--Canon MF5730
--Can
21 matches
Mail list logo
