Well, looks like an embarrassing (and weird) error: could you please try
the trunk version of scanbd now?
Am 03.06.2015 um 16:18 schrieb Greg Kontos:
Thank you, Wilhelm. I appreciate you looking into this issue. I tried
commenting out the paperload and paperunload actions, which still led to
Thank you, Wilhelm. I appreciate you looking into this issue. I tried
commenting out the paperload and paperunload actions, which still led to the
same behavior where the process dies on startup. I went an extra step and also
commented out the entire scanner specific fujitsu conf file within
Hi Greg,
do you need the paperload or paperunload action? If not, please
remove them from the config file, if yes, then give them a correct
script name.
With this changes, please give me the full startup log with debug level 7.
Thanks,
Wilhelm
Am 02.06.2015 um 17:31 schrieb Wilhelm:
Hi Greg,
Hi Wilhelm,
I'm following up to see if you have any thoughts or advice regarding the
trouble with running multiple scanners?
Thanks,
Greg
Greg Kontos
LIMS Integration Specialist
Innovative Diagnostic Laboratory
8751 Park Central Drive, Suite 200
Richmond, VA 23227
Phone: (804) 261-3340
Hi Greg,
thank you for your patience!
I have some ideas where to look for this type of error, but
unfortunately not enough time to do so. And I don't have access to more
than one scanner at the moment :-(
But please stay tuned ...
Thanks,
Wilhelm
Am 02.06.2015 um 14:35 schrieb Greg Kontos:
Hi Greg,
please post the scanbd.conf and all the included config files (e.g.
fujitsu.conf, ...),
Am 21.05.2015 um 15:59 schrieb Greg Kontos:
Thank you, Wilhelm.
The attached zip contains log files with debug level 7. The file
syslog_20150521 shows the process exiting. The file
Hi Greg,
please
1) post your scabd config files
2) provide scanbd version information
I see a page-load event with no script defined - looks strange.
You said that there wasn't any paper load: so the page-load event get
fired without any paper load action? More strange.
3) Can please give the
Am 20.05.2015 um 21:24 schrieb Greg Kontos:
Thank you, Wilhelm. I appreciate you taking the time to look into this.
I am using version 1.4.0-2 of scanbd. This problem does not persist with
only one scanner. It seems that the scanner will trigger the page-loaded
action after a scan is
Hello,
I’m running scanbd on a debian machine with version 1.0.25 of the sane-backend.
I installed scanbd using apt-get, sane-backend was compiled from a git clone.
I’m using two fujitsu fi-7160 scanners in my setup. The problem: If there is
no paper loaded in at least one scanner,
