Great info.
If you're using a Square sprocket cam gear on a roller cam would you retard
or advance the cam by 4 degrees to start?
I am now running a Taft S2 roller cam and my GUESS was 4 degrees retarded
with my adjustable square tooth cam sprocket. I came to this conclusion as most
said so.
I
I know this has been dealt with many times but I am installing a Taft S2 cam
with a square tooth belt. I have an adjustable cam gear[square] Sinse this is
a roller and have heard what is straight up' is different between square and
round tooth cams, where should I start with? I have heard start
Mine kicks in at 6000 rpms ,maybe slightly earlier like 5900.
I don't know how to over ride this, but I've heard much over 6000 rpms with
a 2.5 and piston speeds get too high and you'll lose power.
What have you done to your mini and what do you want out of it?
I have a 89 mini also that is my
I have used the Felpro gaskets on my turbo minivan and my 86 Glhs turbo that
is also O ringed. Because of the metal backing it works really well with O
rings. It also has cross drilled holes too wich my Omni has . It may not be as
strong as the COMETIC or what ever it's called gasket , but I
Hi guys , I haven't posted in a long while.
My Omni Glhs is all done except for some little things.
My super60 cam finally died and I went to a new 89 roller. I don't want to
go back to a slider again But I miss the torque of the Super60 and the power at
20 psi. I can get the same with the
