i spose i should read all the emails in a thread before replying.
:o
oops.
:-D
eric [EMAIL PROTECTED] wrote:
why doesn't anyone ever tell us where they are?
Joe Fishburn wrote: I've got #432 and I need to move it.. I've got way too many
cars...
It can use some TLC.. Anyone
The only synthetic i'll use is RedLine.
20k service limit for oils and 100k+ for gear lubes
eric
Russ W. Knize [EMAIL PROTECTED] wrote: A few years ago they announced a new
formula and raised the price. The
story is that when they lost the lawsuit against Castrol for labelling an
oil that uses
you can buy the rods from the dealer for about 10-15 each or less.
i think i paid 20 for the pair last time.
eric
Ed Nickl [EMAIL PROTECTED] wrote: I think I kept the two short rods with end
caps when I tossed my 525 for a
568. One was like new, and the other was pretty nice. I think
. If someone has
these cheap let me know. Both are still available from the dealer (1 seat belt
buckle still in the country new).
Thanks again
Eric Norris
'86 Omni GLHT
'73 Volvo 142
-
No need to miss a message. Get email on-the-go
with Yahoo
try the 1992 catalog item number 31... my local
dealership keeps them in stock. its called an isolator
they're about 2.75 each... the insert part is approx 1
1/8 to 1 1/4 diameter and the rubber flange bit is
about 1 5/8 or so.
eric
--- [EMAIL PROTECTED] wrote:
In a message dated 6/23/2006 2
Part Number Qty Bin MSRPYOUR PRICE
P4452005 GASKETCY 0 SPORD $ 20.00 $ 18.75
from moparpart.com plus shipping i'm sure...
--- Brian Schulteis [EMAIL PROTECTED] wrote:
P4452005, some dealers even keep it in stock at all
times. :)
On 4/27/06, Ed
they're about 12 dollars from the dealer. if i
remember right they've superseded a few times and i
think they've been updated since the orig part was
designed.
should be just a few days out.
good luck,
eric
--- Gregg F. [EMAIL PROTECTED] wrote:
L-body doorhandles...they are a dime a dozen
well, this is hardly news, CSI has had a 2.2 2.5 electric waterpump
for YEARS. It has been discussed ad nauseum on turbododge. I think it
was Joe O'Connor who did some before/after testing? They are fantatsic
on race engine, and very streetable, especially if you have a monster
FMIC blocking your
checking ONLY the low side is pointless. ALWAYS check with the high
side too. Chances are you orifice tube is shot and full of crap, or
worse, your condensor.
There's a few great AC forums out there...google!
On 8/3/05, Craig Grass [EMAIL PROTECTED] wrote:
Hello All,
I have an air
http://i3.photobucket.com/albums/y87/eric_chart/misc%20parts%20for%20sale/IM001591.jpg
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
/eric_chart/LARGE%20NPR/e24c3fbe.jpg
http://i3.photobucket.com/albums/y87/eric_chart/LARGE%20NPR/b2e44acb.jpg
http://i3.photobucket.com/albums/y87/eric_chart/LARGE%20NPR/d62c6199.jpg
Thanks
Eric
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http
what years 3.8s had the 58s?
On 7/11/05, Marc Medina [EMAIL PROTECTED] wrote:
Why not just buy a 58 mm off a 3.8 liter van? a lot cheaper and easier.
Thanks,
Marc Medina - www.marcmedina.com
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From:
..anybody???
Thanks,
Marc Medina - www.marcmedina.com
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Eric . [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, July 11, 2005 12:43 PM
Subject: Re: SD 52mm Throttle Body Q's
what years
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemrd=1,1item=7981554122sspagename=STRK%3AMESE%3AIT
Still time left to steal this car.
READ THE AUCTION CAREFULLY PLEASE!!
Eric
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org
ok, everybody is always crying baout wanting one of these, and when it
comes up...nobody?!?!
Off to eBay I guess!
On 6/20/05, Eric . [EMAIL PROTECTED] wrote:
$250 shipped. Going to eBay later tonight!!
[EMAIL PROTECTED] or [EMAIL PROTECTED]
---REMOVE-FOOTER-WHEN-REPLYING
The money was an effort to keep out the riff-raff, I'm sure. You know
we are just redheaded stepchilden.
On 6/21/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I think the show was put on by the Volo museum. They were the ones collecting
money, and setting the prices from what I could tell.
I see that my reply only went to howard, so I'll post up my experience
here for all to read:
Ship Greyhound! Once something goes over 60 FedEx basically doubles
or triples the charge. Plug in a 59 long package, a 60 long package
and a 61 long package in their rate calculator, you'll see! I just
$250 shipped. Going to eBay later tonight!!
[EMAIL PROTECTED] or [EMAIL PROTECTED]
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
SOLD!!!
On 6/15/05, Eric . [EMAIL PROTECTED] wrote:
This is for a friend of mine, HIS NAME IS GEORGE.
email me, or call him at the number in the 'ad' below, and tell him
Eric sent you.
images here:
http://www.tsgearheads.com/modules.php?set_albumName=album18op=modloadname=galleryfile
LOTs more pix available!!! Too bad the titles is gone, looks like a
ncie car. eBay later today!
I'll post the auction link later!
Eric
[EMAIL PROTECTED] or [EMAIL PROTECTED]
On 6/16/05, Eric . [EMAIL PROTECTED] wrote:
pix here!
http://photobucket.com/albums/y87/eric_chart/1985%20Shelby
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemitem=7981554122
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
second that!
On 6/17/05, Marc Medina [EMAIL PROTECTED] wrote:
If one or the other is bad, they should still be replaced as a pair. That
way you don't pump whatever crap is in the old part into the new one.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
-
pix here!
http://photobucket.com/albums/y87/eric_chart/1985%20Shelby%20Charger%20for%20sale/
Running, NEW G-head, interior needs cleaning, ground effects there.
Would make a great drivetrain, interior, gfx donor car.
NO TITLE!
$300 Car is located outside Milwaukee, and needs to be picked up by
the
This is for a friend of mine, HIS NAME IS GEORGE.
email me, or call him at the number in the 'ad' below, and tell him
Eric sent you.
images here:
http://www.tsgearheads.com/modules.php?set_albumName=album18op=modloadname=galleryfile=indexinclude=view_album.php
Currently the car needs a shifter
try to place the airdam BETWEEN the IC and rad. a 1/2 to 1 in
between is good, and then the spoiler can deflect the air to the Rad
directly. The IC will get it's air, don't worry
On 6/12/05, Clay Cooke [EMAIL PROTECTED] wrote:
I would make sure you have some space between the rad and IC, and try
Was it a Turbo or NA HO motor?
On 6/9/05, Brian R. Downard Sr. [EMAIL PROTECTED] wrote:
Any Dodge Shelby's are worth saving. That is my opinion. It wouldn't be all
that expensive to repair it. High end retail value on the car is $3,225 at
this current time. It's a classic. I am not sure on the
There are SO MANY ERRORS in that, it's not even worth the paper it was
printed on or the badnwidth it's using now!
Nice '85 GLH' *rolls eyes*
On 6/6/05, Ian . . . . [EMAIL PROTECTED] wrote:
I was curious and went digging
front bumper core from a 89 Daytona $40 shipped
lights, motors and plastic mount (width of the front end) from same 89
Daytona $35+shipping
I don't want to look at any more TD stuff! lol
Eric
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http
I have tried and tried to sell it, but nobody wants it, so I'm going
to part it out I guess. Not a TD, or even a 4 cyl, but has lots of
nice interior and exterior parts.
White Grand Voyager with blue interior (seats 7, with 4 buckets and a bench)
171k on the strong running 3.8, blown tranny
dual
I think everyone is a little hesiatnt on that CSX because the price
has moved so much, people are probably thinking something is wrong.
Despration like that for over a year, will scare off buyers!
It's a great deal, and if I had the $$ I'd snatch it up, but I would
still rather build it myself,
SOMEONE BUY THIS IT IS A COMPLETE NUMBERED CAR!! ARRRGGG!
On Apr 9, 2005 3:52 PM, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hi all,
As per a request I am offering the '87 GLHS #0567 AS IS for $600.00. It
will be offered till Monday afternoon. I also have a ton of extra
TD stuff!!!
Thanks.
Eric Chart
(904)282-4079
[EMAIL PROTECTED]
[EMAIL PROTECTED]
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Rick, the Window sticker says manufacturer Shelby Motorcars Whittier
Cali. That didn't do it for them? Or is it trapped in the system now
as Dodge, cuz taht's what the FL title says?
On Thu, 17 Mar 2005 21:09:08 -, Mullikin, Stefan P
[EMAIL PROTECTED] wrote:
Wouldn't the door tag be enough?
I bought this car from the original owner with the best intentions,
but with another baby on the way, I can't complete her with the care,
time and money she deserves. So, with a heavy heart, I'm getting out
of the TD game!
1987 GLHS #155
CAR IS ALL ORIGINAL, including many original owner's docs
FYI, car is in Florida, pics are available, but be patient.
I can also take a credit card for the price of the car and/or parts.
On Fri, 4 Mar 2005 14:07:12 -0500, Eric . [EMAIL PROTECTED] wrote:
I bought this car from the original owner with the best intentions,
but with another baby
Hi,
I just made a post concerning some things I'm selling:
http://www.turbododge.com/forums/showthread.php?p=510946#post510946
The pump and carrier assembly are both brand new, never used. And the NPR
piping has everything you'll need to get up and running cheaply. Email me
with any questions,
I've got it up on eBay once more in hopes of selling it soon:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemitem=2493637162
Email me with any questions whatsoever. Thanks!
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
Hi guys, car's still for sale, $3000
I made a post about it already, please see this thread:
http://www.turbododge.com/forums/showthread.php?t=61116
Eric Simpson - 89 CSX #212
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org
Hi guys, still trying to sell my CSX, more info here:
http://www.turbododge.com/forums/showthread.php?p=465862#post465862
Make me an offer!
Eric Simpson - 89 CSX #212
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed
Hi guys, I've put my car up on eBay, thought I'd pass the link along for
anyone who may be interested:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemitem=2487148600
Thanks,
Eric Simpson - 89 CSX #212
---REMOVE-FOOTER-WHEN-REPLYING
original. Email me at [EMAIL PROTECTED]
if you're serious.
pics:
http://www.fox302.com/index.pl?s=vguser=genocategory=Shelby_CSX_212
Eric Simpson
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http
PROTECTED]
if you're serious.
pics:
http://www.fox302.com/index.pl?s=vguser=genocategory=Shelby_CSX_212
Eric Simpson
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Sorry guys, the price is $3750, my mistake!
Eric Simpson - 89 CSX #212
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
43 matches
Mail list logo
