Re: [Shinken-devel] trouble migrating from nagios to shinken

FYI: I created issue #975 about the too many contacts issue I found. Roy On 8/15/13 3:14 PM, Olivier Hanesse wrote: In fact, we should add : Pyro > 4.12 and Pyro < 4.16 in the requirements so Pyro 4.13/14/15 as known to work well :) 2013/8/15 Roy Marantz >

Re: [Shinken-devel] trouble migrating from nagios to shinken

In fact, we should add : Pyro > 4.12 and Pyro < 4.16 in the requirements so Pyro 4.13/14/15 as known to work well :) 2013/8/15 Roy Marantz > To answer my own question, pyro 4.14 seems to work. at least everything > now starts and all network ports are being listened to. > Thanks. > Roy > > >

Re: [Shinken-devel] trouble migrating from nagios to shinken

To answer my own question, pyro 4.14 seems to work. at least everything now starts and all network ports are being listened to. Thanks. Roy On 8/15/13 10:53 AM, Roy Marantz wrote: shinken installation requirements says

Re: [Shinken-devel] trouble migrating from nagios to shinken

shinken installation requirements says: # pyro Python package * version 3.x for Debian Squeeze * version < 4.14 if running Shinken 1.0.1 * version 3.x, 4.x and if you can

Re: [Shinken-devel] trouble migrating from nagios to shinken

Use Pyro 4.14, do not use serpent. On 13-08-15 10:13 AM, Roy Marantz wrote: I installed shinken 1.4 with pyro 4.20 and serpent 1.2 and am trying to run with an unchanged /etc/shinken. While everything seems to start correctly, I don't see the livestatus port (5000) nor the WebUI port (7767) b

Re: [Shinken-devel] trouble migrating from nagios to shinken

I installed shinken 1.4 with pyro 4.20 and serpent 1.2 and am trying to run with an unchanged /etc/shinken. While everything seems to start correctly, I don't see the livestatus port (5000) nor the WebUI port (7767) being listened on. I set use_local_log=1 and log_level=DEBUG in /etc/shinken/

Re: [Shinken-devel] trouble migrating from nagios to shinken

Hi, I did try stripping my configuration to just the contacts.cfg and then shrunk that file in order to arrive at the conclusion that that was the cause. I will try 1.4 and see if that makes a differences. Since my testing has been using a single host (as the 10 minute quick start configures

Re: [Shinken-devel] trouble migrating from nagios to shinken

On Thu, Aug 15, 2013 at 1:43 AM, Francois Mikus wrote: > Hello, > > I would suggest trying 1.4. A lot of major performance and stability > fixes were added. > > If you strip your configuration and just add your 168 contacts do you > still get the problem. If so just open a case on the Shinken git

Re: [Shinken-devel] trouble migrating from nagios to shinken

Hello, I would suggest trying 1.4. A lot of major performance and stability fixes were added. If you strip your configuration and just add your 168 contacts do you still get the problem. If so just open a case on the Shinken github and copy your configuration. Jean should be able to quickly fi

Re: [Shinken-devel] trouble migrating from nagios to shinken

Shinken looks like it should be a good alternative to nagios for me. Unfortunately it doesn't seem as compatable with nagios as the web site says. Is there something that describes the configuration differences between shinken and nagios? Are there limits to the number of objects that can be d

[Shinken-devel] trouble migrating from nagios to shinken

I've have followed the 10 minute quick install and gotten a basic shinken installation running. I'm using shinken 1.2.2 on Scientific Linux 6 with Pryro 4.14 and python 2.6. The problems I have are using my existing nagios config files. There are 2 classes of problems: 1) templating/inheritanc