Hi Christian,
Thank you for the suggestion, using ‘-d sat’ worked. I’ll do as you suggest and
report the result to smartmoxntools-database mailing list.
Kind regards,
Colin
On 7 Jan 2017, at 15:32, Christian Franke wrote:
Colin Payne wrote:
> I am using a USB to mSATA SSD board “Pi-102” manufactured by Lycom
> (http://www.lycom.com.tw/Pi-102.htm)
>
> The Pi-102's USB bridge chip is upd720231A manufactured by Renesas
> (https://www.renesas.com/en-eu/products/usb-assp/upd720231a.html)
>
> I’m running Smartmontools on a Raspberry Pi 3, and when I run:
>
> $ sudo smartctl --all /dev/sda -s on
>
> …I expected to see a detailed report of the drive data, but instead I got:
>
> /dev/sda: Unknown USB bridge [0x045b:0x0229 (0x000)]
> Please specify device type with the -d option.
Try '-d sat' option and report the result to smartmontools-database mailing
list.
If SAT works, we could later add this USB ID to drivedb.h. Then this option
will be no longer needed for this bridge. Note that you could also add a local
drive database entry. See section about '-B' option on smartctl man page.
Thanks,
Christian
--
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today. http://sdm.link/xeonphi
___
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
