Re: [RCSE] New HLG

Don Richmond was: [EMAIL PROTECTED] He was in VA Beach this week From: regis [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, July 07, 2003 10:43 PM Subject: Re: [RCSE] New HLG If you put a tow hook on either one, and use an `upstart' that shoots it up about 100 ft. then you can have a

[RCSE] New Stylus TX FS

I have one new Stylus TX only for $339 and an adapter and Spectra Module for $145 Tom TG http://adesigner.com 32 Mount View Dr Afton, VA 22920 phone 540 943-3356 fax 540 943-4178 RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL

[RCSE] Re: Stylus Tx NiCD pack mods

I use and sell spring holders for the Stylus and have never had a problem. I have 1800 and 2000 mah cells in them. (I see little or no difference in the 2000 cells as far as flight time goes). I have changed packs while in the air. Just make sure you set up your plane mechanically zero (radio

Re: [RCSE] Stylus Tx NiCD pack mods

Hey Tom, I have a Sirius tester and it won't work with my 1100mah nicad TX packs, but it will do the 700's, what's up with that? It will do my 1500mak RX packs though. Thanks, Dave Dave, I have no idea. Even though I have used a lot of different chargers (and sell quite a few), I have

[RCSE] serious foam cutting stuff

http://www.demandproducts.com Make 1/2 scale foam planes... maybe RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

Re: [RCSE] WTD: RTF Molded TD ship

I have an Eraser Xtreme in good condition Volz servos, rx, battery. This is the light version, so there are dings and scratches from stiff brush. Flies great. Cost over $1000 with servos and stuff. $650. Starlight 2000 brand new, just flown once to trim it out. Volz servos, rx, battery This

Re: [RCSE] Sears Bandsaw

I sold off all my Sears stuff (tablesaw, drillpress, joiner, disk sander, belt sander, bandsaw, lathe, etc.) and got a Shopsmith. It takes up very little space compared to all those individual tools. No money savings since it cost as much as the individual tools, but worth it. The bandsaw takes

Re: [RCSE] 6 pin deans source

Skip, I stock the Graupner / Multiplex 6 pin plugs Tom TG http://adesigner.com/hobbies 32 Mount View Dr Afton, VA 22920 phone 540 943-3356 fax 540 943-4178 - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] Sent: Thursday, March 06, 2003 3:38

[RCSE] ATF rockets, etc

http://www.msnbc.com/news/877295.asp?cp1=1 There was a news person who made the statement when discussing model rockets what about Remote Control Aircraft, now that they are used to carry bombs. It would be like the ATF taking over licensing all vehicles like cars, aircraft, hot air balloons,

[RCSE] Fw: Our hobby is in danger...

Send an email to Steve. He's sure the ATF will be invading his house. This is how the rumor got started. - Original Message - From: Steve-Teachers Discount Music [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, March 03, 2003 10:21 PM Subject: [BRASS] Our hobby is in danger... I

Re: [RCSE] EPP FOX SWEEEEET!!!!

Jim, I am waiting to get the first production 3 meter one from Mike Bailey www.midwestslope.com Tom TG 32 Mount View Dr Afton, VA 22920 phone 540 943-3356 fax 540 943-4178 - Original Message - From: Jim Beem [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, February 14, 2003 6:49

Re: [RCSE] Multiplex Cockpit Development

Maybe we can now stop all this conjecture and wait for things to work out. Karlton never said Hitec was screwing him. It was just a bunch of misinformed reactionaries. In fact, he always seemed to have trouble with Multiplex Germany and this may be better for everyone in the long run. Thanks for

Re: [RCSE] for sale on eBay

ONLY FOR STATIC EXHIBITION. That's no fun T Don't understand why apple mail breaks the link like that, here it is again. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemcategory=419item=2153209735 Jim Downers Grove, IL Member of the Chicago SOAR club, AMA 592537LSF 7560 Level

Re: [RCSE] for sale

I have one of these and I really like it. Great for one person launch/retrieve. What is your reserve on the retriever? I always wonder why one doesn't just set the starting bid at their minimum. T - Original Message - From: Ed Berris To: [EMAIL PROTECTED] Sent: Friday, January 10,

[RCSE] Spectra module for Vision FS

I have a new Spectra module for the Vision radio. Dial in any frequency. Ordered for someone who upgraded to the Stylus. Great when you don't want a conflict. I use one in my Stylus also. Hitec warns it is only for their radios, but. List is $195. Will sell the set for $130. Tom

Re: [RCSE] Mutiplex Cockpit MM

This is a $200 7 channel radio, not the MPX 4000 :-) There are a few things that would be nice if it had. For another $4 chip they could have names in the model memory instead of numbers. With a little programming they could have crow and proper elevator/flap comp. T - From: Bill Conkling

[RCSE] Slope Trash Magazine

Most probably already know about it... http://www.slopeflyer.com/artman/publish/article_185.shtml T RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in

Re: [RCSE] RE: Wing Servos

Gordy would say go BLUE. T - Original Message - From: Nathan Woods [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Monday, December 30, 2002 9:08 AM Subject: [RCSE] RE: Wing Servos Well, the following servos are all pretty good if money is the deciding factor:

Re: [RCSE] Beware when ordering from Soaring Stuff

I guess TC doesn't know that it is illegal to charge a credit card until an item is actually ready to ship. Also, it is required by law that the customer be notified and allowed to cancel any order that is back ordered for more than 30 days. Tom Subject: [RCSE] Beware when ordering from Soaring

[RCSE] Stylus FS on ebay

only 2 hours left http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemcategory=34056item=1923363591rd=1

[RCSE] Last look at Stylus FS

It is going and almost gone. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemcategory=34056item=1923363591rd=1 Tom

[RCSE] Stylus TX only

Okay here's the breakdown http://www.airtronics.net/2002_Page01.htm Stylus radio: (629.95) $350 Glider card: (199.95) $75 Memory card: ($149) $50 Rubberduck: ($25) Free Shipping/ins: $9.65 This is a very nice radio! Tom

Re: [RCSE] NATS schedule

Does that mean 2 days of Scale and no cross country, F3B or F3J? Folks,I just checked the AMA site, and they had the Soaring NATS 2003 schedule up: july 19-26.here's the url:http://216.37.26.54/comp/Site%20Schedule/wc072003.htmDana

[RCSE] Servo check the link again

Many of the servos are gone. MX 50 are gone check the link again if I did not email you that you got em. http://adesigner.com/brass/servosale.htm T TG 32 Mount View DrAfton, VA 22920540 943-3356fax/ 943-4178

Re: [RCSE] Electric Stuff sold

Too late Les Grammer got the stuff I put his email on the link if you want to get some of it from him. T TG 32 Mount View DrAfton, VA 22920540 943-3356fax/ 943-4178 - Original Message - From: George Voss To: Tom Broeski Sent: Wednesday, November 06, 2002 4:18 PM

Re: [RCSE] Alternative to 3M 77

I use 300 for general use. The 303 I use for gluing fabric to foam 313 for foam to foam (very flammable and not good for you) 373 as a replacement for 3M 77 (won't eat the foam like new 77) I have to buy by the case (24 cans) and will gladly resell if anyone is interested. Min order will

Re: [RCSE] Good service !

I have to agree with you. Tom I thought I'd let you know that McCormick's gives great service. I placed a small web order and 2 days later it was on my door step. Best selection of colors and styles I've seen anywhere. http://www.mccormicksnet.com/search.htm Kerry RCSE-List facilities

[RCSE] Stork for Sale

US version STORK (bottom hinged flaps) includes extra set of tips (and a couple extra repaired tips.) Ready to fly -- rx, battery, 6 Volz servos. Great plane! $650 -- that's $140 over the cost of the electronics and less than the price of the plane by itself. Let me know what frequency and I

[RCSE] Dual battery switch FS

I have an electronic dual battery switch with LED indicating when second pack is in use. This switches to second pack when first pack reaches minimal operating voltage. +- 5/8" x 5/8" x 1.5" Tom TG 32 Mount View DrAfton, VA 22920540 943-3356fax/ 943-4178

[RCSE] Please read if you own a Stork or know someone who does

DECEMBER OR JANUARY PRIOR TO MY SONS DEATH IN MARCH HE, AARON, SOLD HIS STORK ON E-BAY TO SOMEONE I BELIEVE IN YOUR AREA. I DON'T KNOW THE GENTLEMAN'S NAME THAT BOUGHT IT BUT I KNOW THAT HE MET US IN MARYLAND TO PICK IT UP. THE SHIP IS WHITE WITH SOME SHADE OF PINK ON THE BOTTOM OF WINGS

Re: [RCSE] NiMH packs/LED checkers

I have the battery checkers on sale for $15.50 reg $17.95 details here: http://www.maxxprod.com/mpi-6.htm TG Hobbies http://adesigner.com/hobbies 32 Mount View Dr Afton, VA 22920 540 943-3356 fax/ 943-4178 Dave, I have a 4 cell 1650 NiMH rec. pak in my Sharon. with six Multiplex

[RCSE] Organic 2M for sale

New Organic 2M for sale. I was going to build it myself, but it doesn't look like I will ever get around to it. Reg $495 $475 with the aileron wire leads done. Tom TG 32 Mount View DrAfton, VA 22920540 943-3356fax/ 943-4178

[RCSE] Organic 2M SOLD

Gone to Randy McCleave In case anyone wants to offer him a higher price for it. Tom

[RCSE] FS Vision 50 mHz PCM receivers

I have (3) Vision 50 MHz PCM receivers + xtals and a Vision Module The receivers arebasically unused standard PCM Airtronics. List for everything would be $649.80 Will sell all (4) items for $250. Tom TG 32 Mount View DrAfton, VA 22920540 943-3356fax/ 943-4178

[RCSE] WANTED VMC Retriever

I missed the last one. Anybody have one they would sell Tom

[RCSE] Digital HS 5125 servos FS

I just got some of these amazing servos in. Hitec finally came up with something that compares with anything out there. They are .4" thin, so will fit just about any wing. List is $111 each (which is ridiculous). I can sell them in pairs for $138 per set.

Re: [RCSE] Digital HS 5125 servos FS

] Sent: Friday, May 03, 2002 1:05 PM Subject: Re: [RCSE] Digital HS 5125 servos FS Oh thats nice. lets see 111 for a hitec servo, or 65 bucks for a JR servo. My pocket can hardly afford the JR's what next a servo for 200 bucks? Mark From: Tom Broeski [EMAIL PROTECTED] To: soaring [EMAIL

[RCSE] Stylus Batteries for sale

I have two Stylus batteries for sale: (1) Stock 95050 (cost $69) (1) 1500 mAh in Stock 95050 case (cost $84) These are a couple years old, but have been cycled and are at max and in great condition. Total for both $80 + shipping Tom TG 32 Mount View DrAfton, VA 22920540 943-3356fax/

Re: [RCSE] Re: Launches are terrible

Every plane launches different. EG The Shadow has the tow hook 1/4 behind the CG My Extreme has it right on the CG My Stork has it 1/8 in front with 1/16 of down trim and 3/4 flap and 1/4 camber. Most of my pop offs were at the point where I started pulsing the winch. The second I took my foot

Re: [RCSE] Apology to Gordy and RCSE

It happens all the time. The etiquette should be that if it is a private message, then take the [RCSE] out of the subject line. If you leave the [RCSE] in your message, then expect it to be copied to the exchange. Tom - Original Message - From: James C Deck [EMAIL PROTECTED] To: RCSE

[RCSE] Need Trainer Planes

Our club is growing fast and we have a number of new members who have never flown or who need training. We are in desperate need of some trainer planes ready to fly - Like Gentle Ladies or Spirits. We have a foam trainer, but it just doesn't fly that great. Free would be great, but we have

Re: [RCSE] Keisling/Mantis

iginal Message - From: "Bill Swingle" <[EMAIL PROTECTED]> To: "'Tom Broeski'" <[EMAIL PROTECTED]>; "'soaring'" <[EMAIL PROTECTED]> Sent: Thursday, April 11, 2002 1:30 PM Subject: RE: [RCSE] Keisling/Mantis I don't know Tom

Re: [RCSE] Additions to the list of R/C Soaring Hall Of Fame'rs

I would add Tom Keisling You've got to admit the Mantis has made a big impact on soaring (as well as the fact he is a great flier and all around nice guy) Tom - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, April 11, 2002 11:45 AM

Re: [RCSE] Additions to the list of R/C Soaring Hall Of Fame'rs

- From: Bill Swingle [EMAIL PROTECTED] To: 'Tom Broeski' [EMAIL PROTECTED] Cc: 'soaring' [EMAIL PROTECTED] Sent: Thursday, April 11, 2002 12:39 PM Subject: RE: [RCSE] Additions to the list of R/C Soaring Hall Of Fame'rs The definition of the Hall of Fame requirements will have to be defined

[RCSE] Alcyon FG fuse wanted

Need fiberglass fuse for Alcyon Contact Steve Shapiro [EMAIL PROTECTED] 800 586-3876

[RCSE] Full house on Cockpit/ elev comp

Steve Shapiro [EMAIL PROTECTED] Would like anyone who knows how to set up elevator comp on a full house plane using the Cockpit MM (without losing elevator throw) to please email him. Tom

Re: [RCSE] Skegs!

And you have 3 ft to get 100 and what 6' to get a 95?? No need for skegs. T Skegs! I see it's that time or the year again. Hashing over why we should or shouldn't use skegs. My two cents are: If you want a contest with no skegs, then attend an F3J contest! We invite the participation

Re: [RCSE] glass fuse repair help??

Thin multiple layers are usually best. Heavier glass is okay if you have to work inside where you can't rub it down good. Use plenty of epoxy in that case. It is difficulty to layup thin cloth if you have to reach. Even with an inside repair (unless it is just a crack), I use a layer or two

[RCSE] NSP Kestral FS

Antonio Martinez has the following for sale NSP KestrelMostlybuilt kit. Make an offer. You pay shipping or pick up in VA.On a scale of 1-10 quality:Fuse is done. 9.5Wing panels are done (4 individual panels). 7.0Tail feathers are done. 8.0 Please contact him [EMAIL PROTECTED] Antonio

[RCSE] Contests wanted

I am trying to get my LSF level V done and need club contests that consistently have more than 20 pilots participating, at least two of which are level II or above. These can be anywhere in the US. I would like to compile a list which I will post for others to see also. Need dates and

Re: [RCSE] HL servos FS/lead

Dennis, Let's see I just repaired a Duo Discus for Doug Barry, working on two SBXCs (totally smashed one of them from a wing failure on launch, but you would hardly know it. I may have to post before and after pix on that one) and an Xtreme for myself. Still like my Stork... Yea Storks!!!

Re: [RCSE] Stylus on Ebay

That's a reasonable deal. The price for all that new would be about $480 - $500 I was checking Ebay this morning and found an Airtronics Stylus for sale. The Sale includes the transmitter, receiver, an extra transmitter module receiver crystal (different channel), 50 model memory card,

Re: [RCSE] elevator servo?

Heck, the HS300 servos are only $10.80 - am a Hitec kinda guy and dont really want to pay big bucks for the latest/best digital servos out there. Any reasonably priced suggestions would be appreciated. Thanks, Walter TG Hobbies http://adesigner.com/hobbies 32 Mount View Dr Afton, VA

[RCSE] Lead (didn't last a lifetime)

As far as I can tell I have enough lead orders to get rid of most of it. I will repost in a week or so after I ship out the current orders if there is any left. Tom

Re: [RCSE] Krylon Paint

DON'T use Rustolium!! It stays sticky and seems to never dry. Go to Walmart. They have a much better selection of Krylon than Lowes anyway. T Bill Rose Haymaker wrote: I went into Lowes tonight to get a couple of cans of Krylon. Lowes no longer carries Krylon they only carry Rustolium

Re: [RCSE] Messy shop thread

My new shop is neat and clean (mostly). I posted more pictures http://adesigner.com/brass/room.htm I took up 3 rooms in the house and had to build a 30 x 32 shop. Now my wife has the house back. Stephen Syrotiak wrote: That's disgusting! Or is that the part of the shop where the sitting

[RCSE] ESL/BRASS first contest of season

We now have 21 people signed up for the BRASS/ESL contest April 20 21 So, if you were waiting to see if we would hit quota before registering, we have hit it already. Best get your hotel reservations in early. We will be allowing camping again this year. There are sinks and bathrooms and picnic

Re: [RCSE] Spare parts for Voltz's

Not familiar with Voltz, but I have some Volz servo parts. I also have some MPX servo parts. These are usually from trashed servos. It is almost impossible for a distributor or dealer to have anything but spare gear sets for something as small as a servo. You would have to go to the

Re: [RCSE] messy shop contest

Got Gordy and Denny beat. When the bench gets too messy, you just build another one. http://www.adesigner.com/brass/mess.jpg RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED]

[RCSE] For Sale 2M Spectre

Spectre 2M ready to fly $580 (electronics cost $480+) 4 Volz wing max and 2 MPX micro 3 servos. Hitec Rx and 600 ma battery $250 without servos, rx and battery Tom -- TG http://adesigner.com/invention 32 Mount View Dr. Afton, VA 22920 540 943-3356 RCSE-List facilities provided by Model

Re: [RCSE] Optima Batteries

That may be true for the Optima Red, but the yellow is for deep cycle. The thing I like most about the Optima is the totally sealed case that won't leak. The Trojans are supposed to be the best all around I hear. T The Optima's can't be cycled as deeply as the Trojans without destroying them in

Re: [RCSE] Taboo Question

Solder some music wire to about 2 of wire out of the receiver. Make it just long enough not to stick out. I've had no problems with this and it's what Oleg uses. Tom Bill Kuhl wrote: No, not something I am afraid to ask (bet you thought it was a question about Kari the plane launching

Re: [RCSE] How to order Organic?

Sorry -- don't have any. Ben Diss wrote: How 'bout an Organic Electric? -B -- TG Hobbies http://adesigner.com/hobbies 32 Mount View Dr. Afton, VA 22920540 943-3356 Fax 540 943-4178 RCSE-List facilities provided by Model Airplane News. Send subscribe and

Re: [RCSE] How to order Organic?

I have one in stock. Very beautiful but expensive 2M. Tom Anyone know Vladimir's phone number, or a US distributor who actually has these in stock? Thanks,Brian -- TG Hobbies http://adesigner.com/hobbies 32 Mount View Dr. Afton, VA 22920 540 943-3356 Fax 540 943-4178

[RCSE] Stork wing tips

Looking for Stork wing tips. Right, Left or both. Also a used Stork without servos. Tom -- TG http://adesigner.com/invention 32 Mount View Dr. Afton, VA 22920 540 943-3356 Fax 540 943-4178 Member BBB (Better Business Bureau) AAM (American Association of Museums) VAM (Virginia

Re: [RCSE] The Lockheed scam

Of course, it might be best if you just ignore it. Imagine the cost to sue someone for $200? It is one of those things that if he can get it he has made some money. I doubt that Lockheed is getting any of it. At some point it won't be worth the trouble to contact you anymore. [EMAIL PROTECTED]

[RCSE] Re: [RCHLG] mpi servo's

I sell a lot of them and use them exclusively in all my H/Ls. They are slightly bigger than the Hs50's but are really strong. Have had no failures yet. Tom Matthew Blackman wrote: hi i am new to this group. was just wondering if anyone has any thoughts on the mpi MX-50HP Micro Pro

Re: [RCSE] Bozo Bytes the bullet.

Which 10%? That would mean the terrorists would have been allowed weapons also. I would rather relinquish my pocket knife than have any weapons on the plane. Kick 'em in the balls. If the passengers would have known what we know now, they would have rushed them all together - can't rush an

Re: [RCSE] Scale??/ vacuum form

Not sure if you are interested, but these are kind of nice: http://www.warmplastic.com/ Tom Dale Savay wrote: This is my dilema. For a 15 meter 1/5th scale span, I calculate the wingspan to be around 117 right??? Yet some of the off the shelf ARF/ARC gliders for sale from several

Re: [RCSE] Don't do this

Gee, I did the exact same thing only deeper, and had to have the nerve spliced. I got to hospital at 9:20 am and didn't see the hand doctor till 6 pm. They stitched it temporarily and then had to re open it. At least I know I am in good company. T Harley Michaelis wrote: I proceeded to

Re: [RCSE] The infamous dive test

and a retrim. At least to get to a reasonable point, and then it's to taste. Too much weight in the nose will NOT make the dive test give the wrong results, as long as you trim to a reasonable speed first. Tom Broeski wrote: I learned one major thing from the dive test. You can have too

[RCSE] Spectre 120 sold -- FS 2M

Will be selling my Spectre 2M. It is a great flying plane (flies better than the pilot can). The thin airfoil really helps with performance, but my eyes aren't working as well as they used to -- so it too will have to find a new home. Will be selling it with all the servos (volz wing max

Re: [RCSE] Multiplex Charging

Regis White wrote: What inexpensive/reliable charge can I buy for 'all' of my RC needs? Oh, please let us all know the answer to that question. :~) Regis -Original Message- From: Patrick Lanphier [mailto:[EMAIL PROTECTED]] Sent: Tuesday, August 07, 2001 12:59 PM To: Soaring

Re: [RCSE] walking glider

Would these things be legal for HLG?? Cheers. Bill It would give DHL a run for the money. Probably require a lot of practice. I read over the rules, and see nothing to prevent it except knife edge and wing loading or the CD who runs the contest might disallow certain non-rc planes. T

Re: [RCSE] Victory C wings

I have one used set that has servos. I modified it to fit both the Victory C and the Edge. I have a brand new special composite (uni-carbon) that is lighter and stronger than anything out there. I also have a Victory Fuse with slide on nose cone. Tom (1) Used Wing with servos $250 (2) New

Re: [RCSE] Yahoo Paydirect

There were no fees originally at paypal either. Yahoo plans on doing the same thing and getting established then charging fees. It will be okay while in the initial stages. Tom Glenn W wrote: I don't know if anyone noticed but Yahoo now offers a PayDirect option much like paypal but there

[RCSE] NEEDED WINGROD

I need a wing rod for the Shadow 1/2 x 14 with 5 deg bend Anyone have one or know a source? Tom -- TG http://adesigner.com/invention 32 Mount View Dr. Afton, VA 22920 540 943-3356 Fax 540 943-4178 RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe

Re: [RCSE] WING Rod Found

Thanks for the link http://www.hilaunch.com/ -- TG http://adesigner.com/invention 32 Mount View Dr. Afton, VA 22920 540 943-3356 Fax 540 943-4178 RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED]

Re: [RCSE] Summa Classic : No It's Evolution

wondering if they can produce this(molded) plane for under $400 why are most of the others priced at around $700 or more. Seems like a big jump in price for the same type of ship. Is the SUMMA that much less of a plane? Tom Broeski wrote: Let me know where you saw it, cause they are usually $400

Re: [RCSE] molding nosecones

Bill Grenoble PO Box 260 Shermans Dale, PA 17090 [EMAIL PROTECTED] Makes some nice nose cones. Don't know if he has one for your plane. I use tape on teeth on my Psyko and they work great. Tom Brian Iva Smith wrote: Speaking of nose cones...Any one know where I can get one for My Psyko

Re: [RCSE] HLG Tasks

The biggest thing I see that will give the Discus guys the advantage is that all the flights are limited in duration. There is not one event that takes total time of three longest flights no limit on duration. The discus guys can get their times in many cases just from the launch. Tom Steve

[RCSE] BRASS/ ESL contest

Still some room left. Go to http://adesigner.com/brass.htm under schedule of events. Tom -- TG http://adesigner.com/invention 32 Mount View Dr. Afton, VA 22920 540 943-3356 Fax 540 943-4178 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe"

Re: [RCSE] Prepainting mylar disaster!

You should put several layers of mist on it. One heavy coat will soften the previous paint and cause crackle. T Tim Rowledge wrote: What type of paint did you use? How long did you wait for it to dry? Humidity,temp,etc Krylon and waiting 24 hours have never failed me. I've

Re: [RCSE] Music Wire

At the piano store. Chris Debby Hawkins wrote: Where can I find music wire that is 4 feet long or longer? ThanksChris RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] -- TG http://adesigner.com/invention

Re: [RCSE] What is launch preset?

n also buy the universal plugs that crimp on and can be used for any type receiver. real handy to have around. Tom [EMAIL PROTECTED] wrote: Well, yes, and the shift is correct with Futaba. I wasn't addressing any other kind of radios. At 07:46 AM 2/11/01 -0500, Tom Broeski wrote: Br

Re: [RCSE] Stylus and Glider Card manuals....Can I borrow, Please?

Matt Lydon wrote: I recently aquired a stylus w/ glider card, but no manuals. Airtronics wants $10 each plus $8 shipping. Something just irks me about shelling out $28 for a couple of lousy manuals that they could put online for nothing. JR does it, what makes them so special, eh? Anyway, if

Re: [RCSE] Shipping charges! RIGHT

Actually, try seeing how long it takes to box something up and take it to the post office. Add in the box and stuffing and it ain't cheap. It is a real money looser for the small guys. The big companies are better equipped, but it still costs more than the actual price of the stamp. Tom TG

Re: [RCSE] XC course at Muncie

Who would one have to connect with if they have no "team" and no truck, but need the 10K for level 5? 12 miles is a long walk. T [EMAIL PROTECTED] wrote: The Nats XC course is a Level V course, unless something changes. Hope you come up and nail it. I got to ride shotgun last year when Steve

Re: [RCSE] XC course at Muncie

Brian Smith wrote: I am in the same boat(er truck) Tomif there is not a way to get some help with a truck, and the forcast is good I may rent one there locallyI would be interested in what you learnTNX Brian Smith From: Tom Broeski [EMAIL PROTECTED] To: [EMAIL PROTECTED

Re: When things get slow. was [RCSE] on-board data logger

The I can get altimeter watches like the one I use in my plane for $98 (used to cost $145, but I can get a better price now). They weigh 1oz without band and record rate, max altitude, etc. You can even tape them on the wing CG of a H/L and check your launch height.

[RCSE] Altimeters

For the sake of those not reading the other RCSE posts. I can get altimeter watches like the one I use in my plane for $98 (used to cost $145, but I can get a better price now). They weigh 1 oz without band and record rate, max altitude, etc. You can even tape them on the wing CG of a H/L

[RCSE] Oleg's Secret Orders

We are now taking official orders for the first group of Oleg's Secret Hand Launch. The price for the first group will be $285.00 including shipping The wings have been produced by Oleg himself. Orders received after Jan 15th price will be $290+$8 shipping. Orders are expected to start shipping

Re: [RCSE] Kestrel Wind Speed Meters

I have only one of each left in stock now at the big discount. Kestrel 3000 $135 Kestrel 2000 $100 Kestrel 1000 $ 79 That's it. Tim can help you all with future orders. Tom JJ G wrote: Tom, any left JG Tim McDonough wrote: For those that have inquired, I have the Kestrel Wind

Re: [RCSE] Airtronics Stylus vs Multiplex 3030

Yes Karlton really supports his products Bill Swingle wrote: One question I would have before making the jump to Multiplex: Where do you go when the radio needs servicing? Is the service comparable to the other major players? Bill Swingle [EMAIL PROTECTED] Janesville, CA RCSE-List

Re: [RCSE] more garbage about garbage

impact your hobby budget if you get a bunch of HTML junk in every message. This is a worldwide resource and the rule is no HTML. -Silas- - Original Message - From: Tom Broeski [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 15, 2000 10:54 AM Subject: Re: [RCSE] more

Re: [RCSE] Pico Jet CG

there are two little bumps you can feel under the wing next to the fuse. Rich Border wrote: A friend bought a Pico Jet at an auction, it had no instructions with it, where should he balance it? Thanks Rich B RCSE-List facilities provided by Model Airplane News. Send "subscribe" and

Re: [RCSE] Need suggestions for a two meter or std full house

Cal, I have one of the new Spectre 2m for sale. It has the latest update and is now able to really rock. Tom Cal Posthuma wrote: Any suggestions for good TD ship in two meter and standard full house? Must be available not used or no longer on market. Cal RCSE-List facilities provided

[RCSE] Re: [RCSE]small balsa gliders....

I can supply them printed. Price is $0.56 each per 1000, $0.50 each per 2500 There is a $79 set up charge for printing. Tom -- TG Exhibits 32 Mount View Dr. Afton, VA 22920 540 943-3356 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to

[RCSE] Balsa Gliders

http://www.guillow.com definitely beats what I can do them for. Tom -- TG 32 Mount View Dr. Afton, VA 22920 540 943-3356 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

[RCSE] FAI Tapes also available

FAI Tapes are also available upon request: 5 points per meter.15 meters. Tom -- TG 32 Mount View Dr. Afton, VA 22920 540 943-3356 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

<    1   2   3   4   >