I'm setting up a D99 pylon racer and using an electron 6 receiver wing
type same as our open gliders. Everythings working properly but when I
go to set up diff for different modes the landing mode is always on with
the throttle stick in the down position. I went into land menu and
dialed it
Mike Smith wrote:
Dave, can't you just set up the Diff the way you want in the landing
mode? Diff is the only thing you are setting up right?
Mike
At 10:25 AM 5/22/2006, you wrote:
I'm setting up a D99 pylon racer and using an electron 6 receiver
wing type same as our open gliders.
Mike Smith wrote:
Yeah, so Landing Mode has its own set up, so you should be able to get
to 100% pos or even neg diff in landing mode, separately from the other
modes.
Not with the throttle stick at the bottom. If I try to change the point
the landing mode engages the throttle backs off.
I
Dave,
If don't get you problem solved by one of our honorable listees, check out
Yahoo groups http://groups.yahoo.com/group/AirtronicsUsersGroup/. I have
had several scenarios and problems solved by that list. There is a
Airtronics Tech monitoring the list and usually gets back to you on the same
When I fly my normal frequency, 50 Mhz - channel 09, I don't get any
aileron-rudder coupling in reflex mode. If I change the frequency module to
72 Mhz - channel 40 and use a different RX I get aileron-rudder coupling in
reflex mode. I'm using Airtronics RX and Futaba RX in 50 Mhz and Futaba RX
At 05:28 PM 3/17/03 -0800, Albert Wedworth wrote:
Hi
Folks
I got a question for ya
all...
On a Stylus Radio
When I mix the Rudder with the switch #
1,2,3
And I'm in the mix menu
When I give an amount in the 1st
2nd switch position
no amount in the center
position.
For some reason the mix
Actually the thing with a Stylus that would catch everybody's attention is
the loud beeping. If you don't move a stick for an extended period of time,
the Stylus starts beeping loudly. I wish all transmitters would do this.
Randy Bullard
If you turn in your Tx at a contest and left it on. That
I posted your question on the Airtronics forum since I had the same interest
and the answer turns out to be simple. It's probably in the manual but I
can't find it.
Push the + and - keys at the same time and it resets.
Dave
RCSE-List facilities provided by Model Airplane News. Send
Is is possible to program one of the many switches on the Stylus to reset
the timer? I like the momentary switch on the top left to start and stop
the timer, but would love to slave my launch preset switch to reset the
timer when I need to re-light quickly.
Mike
RCSE-List facilities provided
The Stylus God has spoken.
I am not worthy, I am not worthy
:-)
I'm just wondering when he is going to write the Stylus book. My check would
be in the mail right away.
Randy Bullard
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to
Here is one for you Stylus freaks. Had set up a three channel ship on the
glider card, all controls work fine, but the elevator trim did not function.
Switched the set up to an un occupied position and wallaw, trims. Got any
clues as to why there were none? TIA!
Marc
RCSE-List facilities
Off the top of my head;
In speed mode and launch mode trim does not function. Also you can set the
amount of authority trim has.
Steve
At 06:52 AM 3/25/2002 -0500, Marc Gellart wrote:
Here is one for you Stylus freaks. Had set up a three channel ship on the
glider card, all controls work
12 matches
Mail list logo