Hello!
Igor Sobrado schrieb:
> I think that it is a security feature. Just my opinion, but I think
> that it would be too easy to lock a Soekris computer by redirecting
> the comBIOS to the second serial port on a machine with a single port.
I fully agree but because of another aspect of securit
Hi,
I would like to add pci card on net5501, i try: wireless netgear card
wg511v1&v2, netgear gigabit ethernet card, hp gigabit ethernet card,... All
are PCI 3.3v. My OS (openbsd 4.2, freebsd 6.3-7.0rc2) didn't recognize
anyone ??!! My Soekris was net5501-60 with sata disk 100GB.
Thanks
Vincent.
In message <[EMAIL PROTECTED]>, Poul-Henning Kamp writes:
> In message <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
> o writes:
> >Hi all,
> >
> >Is it possible to access the comBIOS via the second com port? I
> >connected the GPIO pins 18-20 (RX, TX, GND) to my USB/serial converter,
> >it works fine wit
In message <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
o writes:
>Hi all,
>
>Is it possible to access the comBIOS via the second com port? I
>connected the GPIO pins 18-20 (RX, TX, GND) to my USB/serial converter,
>it works fine with linux as /dev/ttyS1, but i also want to control the
>BIOS and PXE boot
Hi all,
Is it possible to access the comBIOS via the second com port? I
connected the GPIO pins 18-20 (RX, TX, GND) to my USB/serial converter,
it works fine with linux as /dev/ttyS1, but i also want to control the
BIOS and PXE boot as well.
The comBIOS console seems to be hardcoded only to the f
