Re: custom toolbar under linux
I had this one a while back. Probably it's this: Networkmanager is adding a line to /etc/hosts delete it or make it a comment and everything runs as it should. First line should start with 127.0.0.1 . from this thread: https://groups.google.com/forum/?fromgroups=#!searchin/xsi_list/fedora$20toolbar/xsi_list/_s3UIu2hC0A/nT04xMgscKkJ https://groups.google.com/forum/?fromgroups=#%21searchin/xsi_list/fedora$20toolbar/xsi_list/_s3UIu2hC0A/nT04xMgscKkJ A misconfigured /etc/host can also be the reason for core dumps on startup... I ran into this later :/ cheers, Thomas On 10/05/2012 06:10 AM, Francisco wrote: The original deploy was made in centos, and was running without troubles, but our friends at autodesk said that they wouldnt give us support until we migrate to fedora 14, and problems became with that distro! Francisco. *From:* Simon Anderson simonbenandersonl...@gmail.com *To:* Francisco fra...@yahoo.com; softimage@listproc.autodesk.com *Sent:* Thursday, October 4, 2012 6:41 PM *Subject:* Re: custom toolbar under linux may be answering a question with a question, but hasn't that got more do do with the OS and the version your are running? I find sometimes Linux can be a bit tempremental with drag and dropping On Fri, Oct 5, 2012 at 11:38 AM, Francisco fra...@yahoo.com mailto:fra...@yahoo.com wrote: Hi all! guys does any of you know why Softimage under linux does not allow drag and drop tools in a custom toolbar? what am i doing wrong? Thanks in advance! Francisco Criado. -- --- Simon Ben Anderson blog: http://vinyldevelopment.wordpress.com/
Re: Mocap Connector (was: RE: Any interest in a Kinect for Windows and/or XBox controller capture driver?)
Eric, Just checking in to see if any progress was made on either of these projects. -Greg On Thu, Aug 23, 2012 at 7:38 PM, Eric Cosky e...@cosky.com wrote: While it goes against the seemingly common practices of indie game dev, I really don’t want to spill the beans on it until I get a little closer to alpha. I just can’t bring myself to talk it up while it’s still essentially vaporware ;) ** ** *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Marc-Andre Carbonneau *Sent:* Thursday, August 23, 2012 10:31 AM *To:* softimage@listproc.autodesk.com *Subject:* RE: Mocap Connector (was: RE: Any interest in a Kinect for Windows and/or XBox controller capture driver?) ** ** Allright now you got us curious about your game. What is it. ;) ** ** *From:* softimage-boun...@listproc.autodesk.com [ mailto:softimage-boun...@listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com] *On Behalf Of *Eric Cosky *Sent:* Thursday, August 23, 2012 12:13 PM *To:* softimage@listproc.autodesk.com *Subject:* RE: Mocap Connector (was: RE: Any interest in a Kinect for Windows and/or XBox controller capture driver?) ** ** I apologize for not communicating this earlier, but I was very close to committing to this project but after much thought and discussion I decided I need to stay focused on finishing up the game I am working on right now. The game has been over a year in the works and despite the appeal of turning the mocap connector into a proper product, I really can't let myself switch gears right now - I just have too much invested in the game and I need to get it done. I won’t release the mocap connector unless I can take the time finish it up properly and provide the necessary support for both the project itself and the people who would be using it, and I just can't do that right now. Hopefully I can revisit this project in the future because it isn’t really that far from where it needs to be, but I just can’t afford the time right now. I simply *must* to get this game done ASAP, really don’t have any choice in the matter. Sorry! I’ll review the state of similar products when my workload will afford it, and if it looks like it still makes sense to do I’ll bring it up again and see if anyone is still interested. Thanks, **
Re: How to install the PyQt for Softimage.
I think you may need to be using PyQt 4.8.x as per here: https://github.com/caron/PyQtForSoftimage Eric Thivierge http://www.ethivierge.com On Fri, Oct 5, 2012 at 8:30 PM, Byungchul Kang k...@cgndev.com wrote: Hello Folks.. I tried to install the PyQt for Softimage (Steven's Beta4 version). But i got this message below. ERROR : Traceback (most recent call last): # File Script Block 2, line 1, in module # from PyQt4.QtCore import Qt # ImportError: No module named PyQt4.QtCore How can i install the PyQt for Softimage perfectly. My Installation steps is below.. Windows 8 x64 Softimage 2013 sp1 1. install the python-2.6.6.amd64.msi 2. install the PyQt-Py2.6-x64-gpl-4.9.5-1.exe 3. PyQtForSoftimage_beta4.xsiaddon is it correct?? please somebody provide me some info. Thanks Kang -- *Byungchul Kang* | MBC CG TEAM [http://imbc.com] http://cgndev.com
RE: Installing AddOns Softimage 2012 SP1
I’m afraid, meshpaint is 2013.x exclusive… From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.com Xaviant Cell 770.722.0778 http://www.xaviant.com Where all will be made clear
Re: xsi man animated short
Match moving is quite accurate ;) On 28 Sep, 2012, at 12:22 AM, jahirul amin aminjahi...@yahoo.commailto:aminjahi...@yahoo.com wrote: Could this be the one? http://vimeo.com/28501846 J On 27 Sep 2012, at 17:13, Francisco fra...@yahoo.commailto:fra...@yahoo.com wrote: Hello everyone! does anybody remember a very funny short with xsi man model, walking on filmed locations? Thanks in advance! Francisco attachment: winmail.dat
Re: custom toolbar under linux
Francisco, may I ask which SI version are you using with Fedora 14? I seriously doubted that it works as well in CentOS. This is generally a Linux behaviour. Chris On 5 Oct, 2012, at 9:38 AM, Francisco fra...@yahoo.commailto:fra...@yahoo.com wrote: Hi all! guys does any of you know why Softimage under linux does not allow drag and drop tools in a custom toolbar? what am i doing wrong? Thanks in advance! Francisco Criado. attachment: winmail.dat
RE: Installing AddOns Softimage 2012 SP1
Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Szabolcs Matefy Sent: Friday, October 05, 2012 9:04 AM To: softimage@listproc.autodesk.com Subject: RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.commailto:wayne.willi...@xaviant.com Xaviant Cell 770.722.0778 http://www.xaviant.com Where all will be made clear
Re: Friday Flashback
Friday Flashback #90 xsibase visits Softimage headquarters Aug 2002 http://wp.me/powV4-29b On Fri, Sep 28, 2012 at 9:48 AM, Stephen Blair stephenrbl...@gmail.comwrote: Friday Flashback #89 Creative Environment box shots http://wp.me/powV4-28u On Fri, Sep 21, 2012 at 12:15 PM, Stephen Blair stephenrbl...@gmail.comwrote: Friday Flashback #88 1999 Tekkon Kinkreet schematic http://wp.me/powV4-279 On Fri, Sep 14, 2012 at 7:59 AM, Stephen Blair stephenrbl...@gmail.comwrote: Friday Flashback #87 Orleans' Days at the Cherry House for tender lovers of XSI http://wp.me/powV4-26g On Fri, Sep 7, 2012 at 9:41 AM, Stephen Blair stephenrbl...@gmail.comwrote: #Softimage Friday Flashback #86 Daniel Langlois - Cdn Entrepeneur of the Yr in 94 the Wizard of AWE http://wp.me/powV4-25i This week's flashback is much better than last week's, I promise! On Fri, Aug 31, 2012 at 6:54 AM, Stephen Blair stephenrbl...@gmail.com wrote: Friday Flashback #85 The end part II http://wp.me/powV4-24o On Fri, Aug 24, 2012 at 3:42 PM, Chris Chia chris.c...@autodesk.comwrote: My memories working with Softimage 3D on a SGI... Sent from my iPhone On 24 Aug, 2012, at 10:47 PM, Stephen Blair stephen.bl...@autodesk.commailto:stephen.bl...@autodesk.com wrote: Friday Flashback #84 Japanese brochure for good ol' #SOFTIMAGE 3D http://wp.me/powV4-23R From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Stephen Blair Sent: August-17-12 10:21 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: RE: Friday Flashback Friday Flashback 83 2000 - Softimage hit the ground running with XSI a beautifully constructed environment to work in http://wp.me/powV4-232 From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Alan Fregtman Sent: August-10-12 10:52 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: Re: Friday Flashback Oh my Darwin, SO much red! My yeess On Fri, Aug 10, 2012 at 8:08 AM, Stephen Blair stephen.bl...@autodesk.commailto:stephen.bl...@autodesk.com wrote: Friday Flashback #82 XSI's first SIGGRAPH http://wp.me/powV4-22f From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Stephen Blair Sent: August-03-12 10:44 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: RE: Friday Flashback Friday Flashback 81 From 2004, Softimage XSI the perfect fit: - Everything you need - Everything you want - Everything there is http://wp.me/powV4-21j From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Raffaele Fragapane Sent: July-30-12 4:00 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: Re: Friday Flashback I think Olivier can still be seen shuddering when Batchserve is mentioned in his vicinity :) On Sat, Jul 28, 2012 at 4:58 AM, Stephen Blair stephen.bl...@autodesk.commailto:stephen.bl...@autodesk.commailto: stephen.bl...@autodesk.commailto:stephen.bl...@autodesk.com wrote: Friday Flashback #80 BatchServe 1.5 the Experience http://wp.me/powV4-1YW
Re: XSIBase safe?
from what I read on si-community.com looks like xsibase.com has quietly closed down forever, this time.
Re: emTopolizer
Well no matter where it gets posted, it's still a truckload of awesome sauce! Impressive work, Eric! *Tim Crowson */Lead CG Artist/ *Magnetic Dreams Animation Studio, Inc. *2525 Lebanon Pike, Building C. Nashville, TN 37214 *Ph* 615.885.6801 | *Fax* 615.889.4768 | www.magneticdreams.com tim.crow...@magneticdreams.com On 10/5/2012 8:50 AM, Miquel Campos wrote: Can't believe wasn't here yet ! Yep Mr Mootz Rules!! Miquel Campos www.akaosaru.com http://www.akaosaru.com 2012/10/5 Eric Thivierge ethivie...@gmail.com mailto:ethivie...@gmail.com Since no one has posted about it yet. :) Mr. Mootz is at it again! http://www.mootzoid.com/wb/pages/softimagexsi/emtopolizer.php Eric Thivierge http://www.ethivierge.com -- Signature / /
Re: emTopolizer
Amazing work! I wish ICE modeling had been as accessible from the start as Mootz' concept of plugging operator stacks into this topologizer node thing. Awesome. :D On Fri, Oct 5, 2012 at 9:50 AM, Miquel Campos miquel.cam...@gmail.comwrote: Can't believe wasn't here yet ! Yep Mr Mootz Rules!! Miquel Campos www.akaosaru.com 2012/10/5 Eric Thivierge ethivie...@gmail.com Since no one has posted about it yet. :) Mr. Mootz is at it again! http://www.mootzoid.com/wb/pages/softimagexsi/emtopolizer.php Eric Thivierge http://www.ethivierge.com
Re: Installing AddOns Softimage 2012 SP1
Yeah I'd like figure this out. Sorry I couldn't be of more help yesterday, Wayne. Also, we're running Piotrek's MeshPaint tool in 2012 SAP. There are some bugs, but I'm not sure if those are due to being run in 2012 SAP. Seriously, does no one else get confused by all these versions? You're hurtin' my brain, Autodesk! *Tim Crowson */Lead CG Artist/ *Magnetic Dreams Animation Studio, Inc. *2525 Lebanon Pike, Building C. Nashville, TN 37214 *Ph* 615.885.6801 | *Fax* 615.889.4768 | www.magneticdreams.com tim.crow...@magneticdreams.com On 10/5/2012 8:11 AM, Williams, Wayne wrote: Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? *From:*softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] *On Behalf Of *Szabolcs Matefy *Sent:* Friday, October 05, 2012 9:04 AM *To:* softimage@listproc.autodesk.com *Subject:* RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… *From:*softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] *On Behalf Of *Williams, Wayne *Sent:* Friday, October 05, 2012 2:58 PM *To:* softimage@listproc.autodesk.com *Subject:* Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? *Wayne Williams */Venerable Geneticist, Human Coercion Senior Character Artist /_wayne.willi...@xaviant.com mailto:wayne.willi...@xaviant.com _ *X**aviant **Cell* 770.722.0778 _http://www.xaviant.com _Where all will be made clear -- Signature
Re: XSIBase safe?
No backups?! :( In some way this serves as a reminder for others to backup their stuff, their databases, communities, files. Hard drives fail often. Servers get hacked or die. Be ready. On Fri, Oct 5, 2012 at 10:14 AM, Luc-Eric Rousseau luceri...@gmail.comwrote: from what I read on si-community.com looks like xsibase.com has quietly closed down forever, this time.
Re: Installing AddOns Softimage 2012 SP1
None that I'm aware of, but afaik the latest multi-importer (1.14 as of August?) uses pyQt, so you might need pyQT for Softimage installed too. Version 1.1 doesn't, according to the information given on http://rray.de/xsi/ Check out www.rray.de Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Szabolcs Matefy Sent: Friday, October 05, 2012 9:04 AM To: softimage@listproc.autodesk.com Subject: RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.commailto:wayne.willi...@xaviant.com Xaviant Cell 770.722.0778 http://www.xaviant.com Where all will be made clear -- --- Stefan Kubicek Co-founder --- keyvis digital imagery Wehrgasse 9 - Grüner Hof 1050 Vienna Austria Phone:+43/699/12614231 --- www.keyvis.at ste...@keyvis.at --- -- This email and its attachments are --confidential and for the recipient only--
Re: XSIBase safe?
That's just sad... -Tim On 10/5/2012 9:14 AM, Luc-Eric Rousseau wrote: from what I read on si-community.com looks like xsibase.com has quietly closed down forever, this time. -- Signature
Re: Installing AddOns Softimage 2012 SP1
Not that I know of. Does the addon extract itself properly? It did for me on 64-bit 2012 SAP, and it showed up in the Plugin Tree (with an error, because I don't have PyQT installed). Assuming the addon extracts the files, what happens if you simply load the plugin (Plugin Tree Load) ? On Fri, Oct 5, 2012 at 9:11 AM, Williams, Wayne wayne.willi...@xaviant.comwrote: Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? ** ** *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Szabolcs Matefy *Sent:* Friday, October 05, 2012 9:04 AM *To:* softimage@listproc.autodesk.com *Subject:* RE: Installing AddOns Softimage 2012 SP1 ** ** I’m afraid, meshpaint is 2013.x exclusive… ** ** *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Williams, Wayne *Sent:* Friday, October 05, 2012 2:58 PM *To:* softimage@listproc.autodesk.com *Subject:* Installing AddOns Softimage 2012 SP1 ** ** Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. ** ** The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 ** ** The next was meshpaint by Piotrek Marczak here: ** ** http://vimeo.com/47094105 ** ** I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. ** ** Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. ** ** Anyone have any idea what I might be doing wrong here?? ** ** ** ** *Wayne Williams **Venerable Geneticist, Human Coercion Senior Character Artist **wayne.willi...@xaviant.com * *X**aviant **Cell* 770.722.0778 *http://www.xaviant.com * Where all will be made clear ** **
Re: Installing AddOns Softimage 2012 SP1
That's a shame for people on Linux for which there is no public working compile of the PyQtForSoftimage plugin. :/ On Fri, Oct 5, 2012 at 10:30 AM, Stefan Kubicek s...@tidbit-images.comwrote: None that I'm aware of, but afaik the latest multi-importer (1.14 as of August?) uses pyQt, so you might need pyQT for Softimage installed too. Version 1.1 doesn't, according to the information given on http://rray.de/xsi/ Check out www.rray.de Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? From: softimage-bounces@listproc.**autodesk.comsoftimage-boun...@listproc.autodesk.com[mailto: softimage-bounces@**listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com] On Behalf Of Szabolcs Matefy Sent: Friday, October 05, 2012 9:04 AM To: softimage@listproc.autodesk.**com softimage@listproc.autodesk.com Subject: RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… From: softimage-bounces@listproc.**autodesk.comsoftimage-boun...@listproc.autodesk.com[mailto: softimage-bounces@**listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.**com softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/**wordpress/?page_id=750http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_**2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.com**mailto:wayne.williams@xaviant.**comwayne.willi...@xaviant.com Xaviant Cell 770.722.0778 http://www.xaviant.com Where all will be made clear -- --**- Stefan Kubicek Co-founder --**- keyvis digital imagery Wehrgasse 9 - Grüner Hof 1050 Vienna Austria Phone:+43/699/12614231 --- www.keyvis.at ste...@keyvis.at --- -- This email and its attachments are --confidential and for the recipient only--
Re: How to install the PyQt for Softimage.
You'll also need PyWin installed for your system Python. Without it, Softimage will revert to its own Python, even if you tell it otherwise. And for what it's worth, we have all this running great with 2.7.3. *Tim Crowson */Lead CG Artist/ *Magnetic Dreams Animation Studio, Inc. *2525 Lebanon Pike, Building C. Nashville, TN 37214 *Ph* 615.885.6801 | *Fax* 615.889.4768 | www.magneticdreams.com tim.crow...@magneticdreams.com On 10/5/2012 6:14 AM, Eric Thivierge wrote: Also you'll probably have to switch your Python scripting preference to not use the built in Python that comes with Softimage. Eric Thivierge http://www.ethivierge.com On Fri, Oct 5, 2012 at 8:53 PM, Eric Thivierge ethivie...@gmail.com mailto:ethivie...@gmail.com wrote: I think you may need to be using PyQt 4.8.x as per here: https://github.com/caron/PyQtForSoftimage Eric Thivierge http://www.ethivierge.com On Fri, Oct 5, 2012 at 8:30 PM, Byungchul Kang k...@cgndev.com mailto:k...@cgndev.com wrote: Hello Folks.. I tried to install the PyQt for Softimage (Steven's Beta4 version). But i got this message below. ERROR : Traceback (most recent call last): # File Script Block 2, line 1, in module # from PyQt4.QtCore import Qt # ImportError: No module named PyQt4.QtCore How can i install the PyQt for Softimage perfectly. My Installation steps is below.. Windows 8 x64 Softimage 2013 sp1 1. install the python-2.6.6.amd64.msi 2. install the PyQt-Py2.6-x64-gpl-4.9.5-1.exe 3. PyQtForSoftimage_beta4.xsiaddon is it correct?? please somebody provide me some info. Thanks Kang -- *Byungchul Kang* | MBC CG TEAM [http://imbc.com] http://cgndev.com -- Signature
Re: Installing AddOns Softimage 2012 SP1
Wayne is speaking about the older PPG version of the multi-importer, not the PyQt version. In 2012 SAP, I don't have any problems, and in 2011 SAP SP1 everything was fine as well. -Tim C. On 10/5/2012 9:32 AM, Stephen Blair wrote: Not that I know of. Does the addon extract itself properly? It did for me on 64-bit 2012 SAP, and it showed up in the Plugin Tree (with an error, because I don't have PyQT installed). Assuming the addon extracts the files, what happens if you simply load the plugin (Plugin Tree Load) ? On Fri, Oct 5, 2012 at 9:11 AM, Williams, Wayne wayne.willi...@xaviant.com mailto:wayne.willi...@xaviant.com wrote: Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? *From:*softimage-boun...@listproc.autodesk.com mailto:softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com mailto:softimage-boun...@listproc.autodesk.com] *On Behalf Of *Szabolcs Matefy *Sent:* Friday, October 05, 2012 9:04 AM *To:* softimage@listproc.autodesk.com mailto:softimage@listproc.autodesk.com *Subject:* RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… *From:*softimage-boun...@listproc.autodesk.com mailto:softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com mailto:softimage-boun...@listproc.autodesk.com] *On Behalf Of *Williams, Wayne *Sent:* Friday, October 05, 2012 2:58 PM *To:* softimage@listproc.autodesk.com mailto:softimage@listproc.autodesk.com *Subject:* Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? *Wayne Williams */Venerable Geneticist, Human Coercion Senior Character Artist /_wayne.willi...@xaviant.com mailto:wayne.willi...@xaviant.com _ *X**aviant **Cell*770.722.0778 tel:770.722.0778 _http://www.xaviant.com _Where all will be made clear -- Signature
Re: Installing AddOns Softimage 2012 SP1
its = 2012 compatible, you may need to install vc 2010 redistrib. http://www.microsoft.com/en-us/download/details.aspx?id=14632 From: Szabolcs Matefy Sent: Friday, October 05, 2012 3:03 PM To: softimage@listproc.autodesk.com Subject: RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.com Xaviant Cell 770.722.0778 http://www.xaviant.com Where all will be made clear
Re: Installing AddOns Softimage 2012 SP1
Alan, do you know how Python talks to Softimage on Linux? Afaik on Windows it's based on COM and the PyWin32 extensions, but on Linux? I understand Softimage is run under MainWin, but does that include Python and PyWin32? If so, there might be a way. I'm currently looking into running Qt-based stuff in XSI using Python only (no C++), but it will definitely need the pyWin32 extensions for the mouse hooks. That's a shame for people on Linux for which there is no public working compile of the PyQtForSoftimage plugin. :/ On Fri, Oct 5, 2012 at 10:30 AM, Stefan Kubicek s...@tidbit-images.comwrote: None that I'm aware of, but afaik the latest multi-importer (1.14 as of August?) uses pyQt, so you might need pyQT for Softimage installed too. Version 1.1 doesn't, according to the information given on http://rray.de/xsi/ Check out www.rray.de Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? From: softimage-bounces@listproc.**autodesk.comsoftimage-boun...@listproc.autodesk.com[mailto: softimage-bounces@**listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com] On Behalf Of Szabolcs Matefy Sent: Friday, October 05, 2012 9:04 AM To: softimage@listproc.autodesk.**com softimage@listproc.autodesk.com Subject: RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… From: softimage-bounces@listproc.**autodesk.comsoftimage-boun...@listproc.autodesk.com[mailto: softimage-bounces@**listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.**com softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/**wordpress/?page_id=750http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_**2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.com**mailto:wayne.williams@xaviant.**comwayne.willi...@xaviant.com Xaviant Cell 770.722.0778 http://www.xaviant.com Where all will be made clear -- --**- Stefan Kubicek Co-founder --**- keyvis digital imagery Wehrgasse 9 - Grüner Hof 1050 Vienna Austria Phone:+43/699/12614231 --- www.keyvis.at ste...@keyvis.at --- -- This email and its attachments are --confidential and for the recipient only-- -- --- Stefan Kubicek Co-founder --- keyvis digital imagery Wehrgasse 9 - Grüner Hof 1050 Vienna Austria Phone:+43/699/12614231 --- www.keyvis.at ste...@keyvis.at --- -- This email and its attachments are --confidential and for the recipient only--
Re: Installing AddOns Softimage 2012 SP1
Ok. I guess I'd still ask the same two questions: - does the addon extract itself property (let's say you drag and drop the addon file, does it get extracted in your User folder - what happens if you try to load the .py file with Plugin Tree Load? also, what is logged in the script history? and maybe ... what does Process Monitor show if you capture the events generated by install the xsiaddon file? caio On Fri, Oct 5, 2012 at 10:41 AM, Tim Crowson tim.crow...@magneticdreams.com wrote: Wayne is speaking about the older PPG version of the multi-importer, not the PyQt version. In 2012 SAP, I don't have any problems, and in 2011 SAP SP1 everything was fine as well. -Tim C. On 10/5/2012 9:32 AM, Stephen Blair wrote: Not that I know of. Does the addon extract itself properly? It did for me on 64-bit 2012 SAP, and it showed up in the Plugin Tree (with an error, because I don't have PyQT installed). Assuming the addon extracts the files, what happens if you simply load the plugin (Plugin Tree Load) ? On Fri, Oct 5, 2012 at 9:11 AM, Williams, Wayne wayne.willi...@xaviant.com wrote: Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Szabolcs Matefy *Sent:* Friday, October 05, 2012 9:04 AM *To:* softimage@listproc.autodesk.com *Subject:* RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Williams, Wayne *Sent:* Friday, October 05, 2012 2:58 PM *To:* softimage@listproc.autodesk.com *Subject:* Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? *Wayne Williams **Venerable Geneticist, Human Coercion Senior Character Artist **wayne.willi...@xaviant.com * *X**aviant **Cell* 770.722.0778 *http://www.xaviant.com * Where all will be made clear --
Re: XSIBase safe?
time to migrate en masse to SI Community On Fri, Oct 5, 2012 at 7:30 AM, Tim Crowson tim.crow...@magneticdreams.comwrote: That's just sad... -Tim On 10/5/2012 9:14 AM, Luc-Eric Rousseau wrote: from what I read on si-community.com looks like xsibase.com has quietly closed down forever, this time. --
RE: Installing AddOns Softimage 2012 SP1
It does appear in the User Folder upon installing. When I try to load the .py file from the Plugin TreeLoad nothing shows up in the FileImport menu (this is for the ppg version of Tim's multi importer.) I will go ahead and install the python stuffs to see if I can get it going that way and will report back! Thanks for all your help guys. -Wayne From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Stephen Blair Sent: Friday, October 05, 2012 11:00 AM To: softimage@listproc.autodesk.com Subject: Re: Installing AddOns Softimage 2012 SP1 Ok. I guess I'd still ask the same two questions: - does the addon extract itself property (let's say you drag and drop the addon file, does it get extracted in your User folder - what happens if you try to load the .py file with Plugin Tree Load? also, what is logged in the script history? and maybe ... what does Process Monitor show if you capture the events generated by install the xsiaddon file? caio On Fri, Oct 5, 2012 at 10:41 AM, Tim Crowson tim.crow...@magneticdreams.commailto:tim.crow...@magneticdreams.com wrote: Wayne is speaking about the older PPG version of the multi-importer, not the PyQt version. In 2012 SAP, I don't have any problems, and in 2011 SAP SP1 everything was fine as well. -Tim C. On 10/5/2012 9:32 AM, Stephen Blair wrote: Not that I know of. Does the addon extract itself properly? It did for me on 64-bit 2012 SAP, and it showed up in the Plugin Tree (with an error, because I don't have PyQT installed). Assuming the addon extracts the files, what happens if you simply load the plugin (Plugin Tree Load) ? On Fri, Oct 5, 2012 at 9:11 AM, Williams, Wayne wayne.willi...@xaviant.commailto:wayne.willi...@xaviant.com wrote: Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? From: softimage-boun...@listproc.autodesk.commailto:softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.commailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Szabolcs Matefy Sent: Friday, October 05, 2012 9:04 AM To: softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com Subject: RE: Installing AddOns Softimage 2012 SP1 I'm afraid, meshpaint is 2013.x exclusive... From: softimage-boun...@listproc.autodesk.commailto:softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.commailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson's multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don't show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don't show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won't show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.commailto:wayne.willi...@xaviant.com Xaviant Cell 770.722.0778tel:770.722.0778 http://www.xaviant.com Where all will be made clear --
Re: custom toolbar under linux
Are you all updated? I had this issue then I asked the sysadmin here to do all my updates and some 300 updates later, including a new kernel update, it worked. On Thu, Oct 4, 2012 at 9:38 PM, Francisco fra...@yahoo.com wrote: Hi all! guys does any of you know why Softimage under linux does not allow drag and drop tools in a custom toolbar? what am i doing wrong? Thanks in advance! Francisco Criado.
Re: Installing AddOns Softimage 2012 SP1
Yes, pywin32 is present. Not sure how to approach the problem though. On Fri, Oct 5, 2012 at 10:48 AM, Stefan Kubicek s...@tidbit-images.comwrote: Alan, do you know how Python talks to Softimage on Linux? Afaik on Windows it's based on COM and the PyWin32 extensions, but on Linux? I understand Softimage is run under MainWin, but does that include Python and PyWin32? If so, there might be a way. I'm currently looking into running Qt-based stuff in XSI using Python only (no C++), but it will definitely need the pyWin32 extensions for the mouse hooks. That's a shame for people on Linux for which there is no public working compile of the PyQtForSoftimage plugin. :/ On Fri, Oct 5, 2012 at 10:30 AM, Stefan Kubicek s...@tidbit-images.com wrote: None that I'm aware of, but afaik the latest multi-importer (1.14 as of August?) uses pyQt, so you might need pyQT for Softimage installed too. Version 1.1 doesn't, according to the information given on http://rray.de/xsi/ Check out www.rray.de Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? From: softimage-bounces@listproc.**a**utodesk.com http://autodesk.com softimage-bounces@**listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com [mailto: softimage-bounces@**listproc.**autodesk.comhttp://listproc.autodesk.com softimage-**boun...@listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com **] On Behalf Of Szabolcs Matefy Sent: Friday, October 05, 2012 9:04 AM To: softimage@listproc.autodesk.com softimage@listproc.autodesk.** com softimage@listproc.autodesk.com Subject: RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… From: softimage-bounces@listproc.**a**utodesk.com http://autodesk.com softimage-bounces@**listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com [mailto: softimage-bounces@**listproc.**autodesk.comhttp://listproc.autodesk.com softimage-**boun...@listproc.autodesk.comsoftimage-boun...@listproc.autodesk.com **] On Behalf Of Williams, Wayne Sent: Friday, October 05, 2012 2:58 PM To: softimage@listproc.autodesk.com softimage@listproc.autodesk.** com softimage@listproc.autodesk.com Subject: Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750http://dynamiclens.com/**wordpress/?page_id=750 http://**dynamiclens.com/wordpress/?**page_id=750http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_ 2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? Wayne Williams Venerable Geneticist, Human Coercion Senior Character Artist wayne.willi...@xaviant.commailto:wayne.williams@xaviant.com wayne.williams@xaviant.**com wayne.willi...@xaviant.com Xaviant Cell 770.722.0778 http://www.xaviant.com Where all will be made clear -- --- Stefan Kubicek Co-founder --- keyvis digital imagery Wehrgasse 9 - Grüner Hof 1050 Vienna Austria Phone:+43/699/12614231 --- www.keyvis.at ste...@keyvis.at --- -- This email and its attachments are --confidential and for the recipient only-- -- --**- Stefan Kubicek Co-founder --**- keyvis digital imagery Wehrgasse 9 - Grüner Hof 1050 Vienna Austria Phone:+43/699/12614231 --- www.keyvis.at ste...@keyvis.at --- -- This email and its attachments are --confidential and for the recipient only--
rendermap on a farm with xsibatch
Anyway to rendermap objects on a farm with xsibatch? Kris
Re: rendermap on a farm with xsibatch
you can execute a script via xsibatch Am 05.10.2012 um 17:58 schrieb Kris Rivel krisri...@gmail.com: Anyway to rendermap objects on a farm with xsibatch? Kris
Re: Installing AddOns Softimage 2012 SP1
For the PPG version, if you go into Plugin Manager Items, and set the Filter to User Addons (or wherever you installed the addon), does the Multi_Importer_Menu item show up?) As a test, try changing the RegisterMenu call to put the item in the siMenuMainHelpID menu, and see if that shows up? Did you try temporarily renaming your User folder, to make sure it's not some weird conflict with something else? On Fri, Oct 5, 2012 at 11:15 AM, Williams, Wayne wayne.willi...@xaviant.com wrote: It does appear in the User Folder upon installing. When I try to load the .py file from the Plugin TreeLoad nothing shows up in the FileImport menu (this is for the ppg version of Tim’s multi importer.) I will go ahead and install the python stuffs to see if I can get it going that way and will report back! Thanks for all your help guys. -Wayne ** ** *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Stephen Blair *Sent:* Friday, October 05, 2012 11:00 AM *To:* softimage@listproc.autodesk.com *Subject:* Re: Installing AddOns Softimage 2012 SP1 ** ** Ok. I guess I'd still ask the same two questions: - does the addon extract itself property (let's say you drag and drop the addon file, does it get extracted in your User folder - what happens if you try to load the .py file with Plugin Tree Load? also, what is logged in the script history? and maybe ... what does Process Monitor show if you capture the events generated by install the xsiaddon file? caio On Fri, Oct 5, 2012 at 10:41 AM, Tim Crowson tim.crow...@magneticdreams.com wrote: Wayne is speaking about the older PPG version of the multi-importer, not the PyQt version. In 2012 SAP, I don't have any problems, and in 2011 SAP SP1 everything was fine as well. -Tim C. On 10/5/2012 9:32 AM, Stephen Blair wrote: Not that I know of. Does the addon extract itself properly? It did for me on 64-bit 2012 SAP, and it showed up in the Plugin Tree (with an error, because I don't have PyQT installed). Assuming the addon extracts the files, what happens if you simply load the plugin (Plugin Tree Load) ? On Fri, Oct 5, 2012 at 9:11 AM, Williams, Wayne wayne.willi...@xaviant.com wrote: Ok, can check that off the list! Tim spent a good bit of time yesterday trying to help me get this going (thanks again Tim!) but to no avail. Were there any changes to how xsiaddons install between Softimage 2012, 2012sp1, 2012 SAP (sorry, I forget all the different flavors of point releases for 2012)?? *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Szabolcs Matefy *Sent:* Friday, October 05, 2012 9:04 AM *To:* softimage@listproc.autodesk.com *Subject:* RE: Installing AddOns Softimage 2012 SP1 I’m afraid, meshpaint is 2013.x exclusive… *From:* softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] *On Behalf Of *Williams, Wayne *Sent:* Friday, October 05, 2012 2:58 PM *To:* softimage@listproc.autodesk.com *Subject:* Installing AddOns Softimage 2012 SP1 Using Softimage 2012 SP1 64 on Win 7 64 bit here. I came across a couple of really handy xsiaddons but cannot seem to get them going. The first was Tim Crowson’s multi-importer tool here: http://dynamiclens.com/wordpress/?page_id=750 The next was meshpaint by Piotrek Marczak here: http://vimeo.com/47094105 I have tried to install them via drag and drop to the interface but they don’t show up in the menu. I uninstalled, rebooted Soft and then tried FileAddonInstall and pointed to the file that way, installing to the User Addons directory. I see them installed in there but they still don’t show in the menus back in Softimage. Uninstalled them and tried to install via Plugin Manager by right clicking the User Root and installing xsiaddon that way. Same deal. See them there in : C:\Users\Wayne Williams\Autodesk\Softimage_2012_SP1\Addons but still won’t show up in the interface. Anyone have any idea what I might be doing wrong here?? *Wayne Williams **Venerable Geneticist, Human Coercion Senior Character Artist **wayne.willi...@xaviant.com * *X**aviant **Cell* 770.722.0778 *http://www.xaviant.com * Where all will be made clear ** ** ** ** -- ** **
Re: rendermap on a farm with xsibatch
Hi Kris, I wrote this a while ago, it may help: http://www.sajjadamjad.com/plugins.html#Mapify It includes a command which enables render mapping through xsibatch. After installing the add-on read the help file for more info, I can't remember much :-) Cheers, Sajjad On 5 October 2012 17:07, Kris Rivel krisri...@gmail.com wrote: I figured...any simple script examples for a non-coder like me? Just want to list a bunch of objects and regenerate their rendermap...preferably all at once since I assume thats faster than doing each one separately. Kris On Fri, Oct 5, 2012 at 12:01 PM, Sebastian Kowalski l...@sekow.comwrote: you can execute a script via xsibatch Am 05.10.2012 um 17:58 schrieb Kris Rivel krisri...@gmail.com: Anyway to rendermap objects on a farm with xsibatch? Kris
Re: rendermap on a farm with xsibatch
There's also the possibility to use lightmaps within your rendertree. In the rendering options should be an option to render lightmaps only ... -- christian keller visual effects|direction m +49 179 69 36 248 f +49 40 386 835 33 chris3...@me.com gesendet von meinem iDing Am 05.10.2012 um 18:45 schrieb Kris Rivel krisri...@gmail.com: Thanks, I'll check that out! On Fri, Oct 5, 2012 at 12:23 PM, Sajjad Amjad sajjad.am...@gmail.com wrote: Hi Kris, I wrote this a while ago, it may help: http://www.sajjadamjad.com/plugins.html#Mapify It includes a command which enables render mapping through xsibatch. After installing the add-on read the help file for more info, I can't remember much :-) Cheers, Sajjad On 5 October 2012 17:07, Kris Rivel krisri...@gmail.com wrote: I figured...any simple script examples for a non-coder like me? Just want to list a bunch of objects and regenerate their rendermap...preferably all at once since I assume thats faster than doing each one separately. Kris On Fri, Oct 5, 2012 at 12:01 PM, Sebastian Kowalski l...@sekow.com wrote: you can execute a script via xsibatch Am 05.10.2012 um 17:58 schrieb Kris Rivel krisri...@gmail.com: Anyway to rendermap objects on a farm with xsibatch? Kris
Re: Runtime Error R6025
thanks, the odd part is all the other frames render just fine? weird! From: Ben Houston b...@exocortex.com To: Adam Seeley adam_see...@yahoo.com; softimage@listproc.autodesk.com Sent: Friday, October 5, 2012 1:20 PM Subject: Re: Runtime Error R6025 It is a coding error in a C++ program, it likely isn't an install error. If it is crashing in Softimage, it is a Softimage error. If it is crashing in Arnold it is an Arnold error. It may also be another third party plugin that is causing this. You can try to work around it by changing how you are doing things and then hopefully the erroneous code will be avoided... -ben On Fri, Oct 5, 2012 at 1:17 PM, Adam Seeley adam_see...@yahoo.com wrote: Quite familar with this one Runtime Error R6025: Attempt to render Scene file some point after 16:00 on a Friday. Automatic Random Error generated. Please try again on Monday when everything will just work as if like magic. Adam. From: john clausing jclausin...@yahoo.com To: softimage list softimage list Softimage@listproc.Autodesk.com Sent: Friday, 5 October 2012, 18:11 Subject: Runtime Error R6025 Hello, I'm rendering a sequence who contents changes very little.. Frame 60 out of 100 refuses to render and both locally and on the farm i get the R6025 error. I am rendering with Arnold, and have reinstalled softimage 2013 any ideas? thanks, john -- Best regards, Ben Houston Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom http://Exocortex.com - Passionate CG Software Professionals.
Re: Runtime Error R6025
particles? one pinged off into infinity? On 5 October 2012 18:25, john clausing jclausin...@yahoo.com wrote: thanks, the odd part is all the other frames render just fine? weird! -- *From:* Ben Houston b...@exocortex.com *To:* Adam Seeley adam_see...@yahoo.com; softimage@listproc.autodesk.com *Sent:* Friday, October 5, 2012 1:20 PM *Subject:* Re: Runtime Error R6025 It is a coding error in a C++ program, it likely isn't an install error. If it is crashing in Softimage, it is a Softimage error. If it is crashing in Arnold it is an Arnold error. It may also be another third party plugin that is causing this. You can try to work around it by changing how you are doing things and then hopefully the erroneous code will be avoided... -ben On Fri, Oct 5, 2012 at 1:17 PM, Adam Seeley adam_see...@yahoo.com wrote: Quite familar with this one Runtime Error R6025: Attempt to render Scene file some point after 16:00 on a Friday. Automatic Random Error generated. Please try again on Monday when everything will just work as if like magic. Adam. From: john clausing jclausin...@yahoo.com To: softimage list softimage list Softimage@listproc.Autodesk.com Sent: Friday, 5 October 2012, 18:11 Subject: Runtime Error R6025 Hello, I'm rendering a sequence who contents changes very little.. Frame 60 out of 100 refuses to render and both locally and on the farm i get the R6025 error. I am rendering with Arnold, and have reinstalled softimage 2013 any ideas? thanks, john -- Best regards, Ben Houston Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom http://Exocortex.com - Passionate CG Software Professionals.
Re: Runtime Error R6025
no particles,.but lots of hair? j From: Rob Chapman tekano@gmail.com To: john clausing jclausin...@yahoo.com; softimage@listproc.autodesk.com Sent: Friday, October 5, 2012 1:41 PM Subject: Re: Runtime Error R6025 particles? one pinged off into infinity? On 5 October 2012 18:25, john clausing jclausin...@yahoo.com wrote: thanks, the odd part is all the other frames render just fine? weird! From: Ben Houston b...@exocortex.com To: Adam Seeley adam_see...@yahoo.com; softimage@listproc.autodesk.com Sent: Friday, October 5, 2012 1:20 PM Subject: Re: Runtime Error R6025 It is a coding error in a C++ program, it likely isn't an install error. If it is crashing in Softimage, it is a Softimage error. If it is crashing in Arnold it is an Arnold error. It may also be another third party plugin that is causing this. You can try to work around it by changing how you are doing things and then hopefully the erroneous code will be avoided... -ben On Fri, Oct 5, 2012 at 1:17 PM, Adam Seeley adam_see...@yahoo.com wrote: Quite familar with this one Runtime Error R6025: Attempt to render Scene file some point after 16:00 on a Friday. Automatic Random Error generated. Please try again on Monday when everything will just work as if like magic. Adam. From: john clausing jclausin...@yahoo.com To: softimage list softimage list Softimage@listproc.Autodesk.com Sent: Friday, 5 October 2012, 18:11 Subject: Runtime Error R6025 Hello, I'm rendering a sequence who contents changes very little.. Frame 60 out of 100 refuses to render and both locally and on the farm i get the R6025 error. I am rendering with Arnold, and have reinstalled softimage 2013 any ideas? thanks, john -- Best regards, Ben Houston Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom http://Exocortex.com - Passionate CG Software Professionals.
Re: Runtime Error R6025
You don't have everything installed in one giant workgroup do you? On Fri, Oct 5, 2012 at 1:42 PM, john clausing jclausin...@yahoo.com wrote: no particles,.but lots of hair? j -- *From:* Rob Chapman tekano@gmail.com *To:* john clausing jclausin...@yahoo.com; softimage@listproc.autodesk.com *Sent:* Friday, October 5, 2012 1:41 PM *Subject:* Re: Runtime Error R6025 particles? one pinged off into infinity? On 5 October 2012 18:25, john clausing jclausin...@yahoo.com wrote: thanks, the odd part is all the other frames render just fine? weird! -- *From:* Ben Houston b...@exocortex.com *To:* Adam Seeley adam_see...@yahoo.com; softimage@listproc.autodesk.com *Sent:* Friday, October 5, 2012 1:20 PM *Subject:* Re: Runtime Error R6025 It is a coding error in a C++ program, it likely isn't an install error. If it is crashing in Softimage, it is a Softimage error. If it is crashing in Arnold it is an Arnold error. It may also be another third party plugin that is causing this. You can try to work around it by changing how you are doing things and then hopefully the erroneous code will be avoided... -ben On Fri, Oct 5, 2012 at 1:17 PM, Adam Seeley adam_see...@yahoo.com wrote: Quite familar with this one Runtime Error R6025: Attempt to render Scene file some point after 16:00 on a Friday. Automatic Random Error generated. Please try again on Monday when everything will just work as if like magic. Adam. From: john clausing jclausin...@yahoo.com To: softimage list softimage list Softimage@listproc.Autodesk.com Sent: Friday, 5 October 2012, 18:11 Subject: Runtime Error R6025 Hello, I'm rendering a sequence who contents changes very little.. Frame 60 out of 100 refuses to render and both locally and on the farm i get the R6025 error. I am rendering with Arnold, and have reinstalled softimage 2013 any ideas? thanks, john -- Best regards, Ben Houston Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom http://Exocortex.com - Passionate CG Software Professionals. -- Freelance 3D and VFX animator http://vimeopro.com/user7979713/3d-work
Re: Runtime Error R6025
Just a note, you might want to try to split some of those things out into separate groups. It can help you to troubleshoot later. On Fri, Oct 5, 2012 at 2:23 PM, john clausing jclausin...@yahoo.com wrote: yup, one giant workgroup :) but its ok now, i re-installed and updated arnold and all is well thanks everyone! john -- *From:* Eric Lampi ericla...@gmail.com *To:* john clausing jclausin...@yahoo.com; softimage@listproc.autodesk.com *Sent:* Friday, October 5, 2012 2:21 PM *Subject:* Re: Runtime Error R6025 You don't have everything installed in one giant workgroup do you? On Fri, Oct 5, 2012 at 1:42 PM, john clausing jclausin...@yahoo.comwrote: no particles,.but lots of hair? j -- *From:* Rob Chapman tekano@gmail.com *To:* john clausing jclausin...@yahoo.com; softimage@listproc.autodesk.com *Sent:* Friday, October 5, 2012 1:41 PM *Subject:* Re: Runtime Error R6025 particles? one pinged off into infinity? On 5 October 2012 18:25, john clausing jclausin...@yahoo.com wrote: thanks, the odd part is all the other frames render just fine? weird! -- *From:* Ben Houston b...@exocortex.com *To:* Adam Seeley adam_see...@yahoo.com; softimage@listproc.autodesk.com *Sent:* Friday, October 5, 2012 1:20 PM *Subject:* Re: Runtime Error R6025 It is a coding error in a C++ program, it likely isn't an install error. If it is crashing in Softimage, it is a Softimage error. If it is crashing in Arnold it is an Arnold error. It may also be another third party plugin that is causing this. You can try to work around it by changing how you are doing things and then hopefully the erroneous code will be avoided... -ben On Fri, Oct 5, 2012 at 1:17 PM, Adam Seeley adam_see...@yahoo.com wrote: Quite familar with this one Runtime Error R6025: Attempt to render Scene file some point after 16:00 on a Friday. Automatic Random Error generated. Please try again on Monday when everything will just work as if like magic. Adam. From: john clausing jclausin...@yahoo.com To: softimage list softimage list Softimage@listproc.Autodesk.com Sent: Friday, 5 October 2012, 18:11 Subject: Runtime Error R6025 Hello, I'm rendering a sequence who contents changes very little.. Frame 60 out of 100 refuses to render and both locally and on the farm i get the R6025 error. I am rendering with Arnold, and have reinstalled softimage 2013 any ideas? thanks, john -- Best regards, Ben Houston Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom http://Exocortex.com - Passionate CG Software Professionals. -- Freelance 3D and VFX animator http://vimeopro.com/user7979713/3d-work -- Freelance 3D and VFX animator http://vimeopro.com/user7979713/3d-work
Re: Installing AddOns Softimage 2012 SP1
It's possible to have it working in linux, but it's a different approach (that's I'm not too much aware of). I *think* using the CDH is mandatory, or at least need a custom pyqt integration to work. It's still not perfect and has its problems.
Re: Friday Flashback
Oh wow. They were so young! On Fri, Oct 5, 2012 at 11:24 PM, Stephen Blair stephenrbl...@gmail.comwrote: Friday Flashback #90 xsibase visits Softimage headquarters Aug 2002 http://wp.me/powV4-29b On Fri, Sep 28, 2012 at 9:48 AM, Stephen Blair stephenrbl...@gmail.comwrote: Friday Flashback #89 Creative Environment box shots http://wp.me/powV4-28u On Fri, Sep 21, 2012 at 12:15 PM, Stephen Blair stephenrbl...@gmail.comwrote: Friday Flashback #88 1999 Tekkon Kinkreet schematic http://wp.me/powV4-279 On Fri, Sep 14, 2012 at 7:59 AM, Stephen Blair stephenrbl...@gmail.comwrote: Friday Flashback #87 Orleans' Days at the Cherry House for tender lovers of XSI http://wp.me/powV4-26g On Fri, Sep 7, 2012 at 9:41 AM, Stephen Blair stephenrbl...@gmail.comwrote: #Softimage Friday Flashback #86 Daniel Langlois - Cdn Entrepeneur of the Yr in 94 the Wizard of AWE http://wp.me/powV4-25i This week's flashback is much better than last week's, I promise! On Fri, Aug 31, 2012 at 6:54 AM, Stephen Blair stephenrbl...@gmail.com wrote: Friday Flashback #85 The end part II http://wp.me/powV4-24o On Fri, Aug 24, 2012 at 3:42 PM, Chris Chia chris.c...@autodesk.comwrote: My memories working with Softimage 3D on a SGI... Sent from my iPhone On 24 Aug, 2012, at 10:47 PM, Stephen Blair stephen.bl...@autodesk.commailto:stephen.bl...@autodesk.com wrote: Friday Flashback #84 Japanese brochure for good ol' #SOFTIMAGE 3D http://wp.me/powV4-23R From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Stephen Blair Sent: August-17-12 10:21 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: RE: Friday Flashback Friday Flashback 83 2000 - Softimage hit the ground running with XSI a beautifully constructed environment to work in http://wp.me/powV4-232 From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Alan Fregtman Sent: August-10-12 10:52 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: Re: Friday Flashback Oh my Darwin, SO much red! My yeess On Fri, Aug 10, 2012 at 8:08 AM, Stephen Blair stephen.bl...@autodesk.commailto:stephen.bl...@autodesk.com wrote: Friday Flashback #82 XSI's first SIGGRAPH http://wp.me/powV4-22f From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Stephen Blair Sent: August-03-12 10:44 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: RE: Friday Flashback Friday Flashback 81 From 2004, Softimage XSI the perfect fit: - Everything you need - Everything you want - Everything there is http://wp.me/powV4-21j From: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com [mailto: softimage-boun...@listproc.autodesk.commailto: softimage-boun...@listproc.autodesk.com] On Behalf Of Raffaele Fragapane Sent: July-30-12 4:00 AM To: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.commailto: softimage@listproc.autodesk.com Subject: Re: Friday Flashback I think Olivier can still be seen shuddering when Batchserve is mentioned in his vicinity :) On Sat, Jul 28, 2012 at 4:58 AM, Stephen Blair stephen.bl...@autodesk.commailto:stephen.bl...@autodesk.com mailto:stephen.bl...@autodesk.commailto: stephen.bl...@autodesk.com wrote: Friday Flashback #80 BatchServe 1.5 the Experience http://wp.me/powV4-1YW -- Xavier
Re: Runtime Error R6025
Yes agree with Eric in the separate workgroup and plugins... We received quite afew crashed scenes which are often caused by 3rd party plugins, addons and compounds... Hence it's always better to design a workgroup for scalability and extensibility. Chris On 6 Oct, 2012, at 2:26 AM, Eric Lampi ericla...@gmail.commailto:ericla...@gmail.com wrote: Just a note, you might want to try to split some of those things out into separate groups. It can help you to troubleshoot later. On Fri, Oct 5, 2012 at 2:23 PM, john clausing jclausin...@yahoo.commailto:jclausin...@yahoo.com wrote: yup, one giant workgroup :) but its ok now, i re-installed and updated arnold and all is well thanks everyone! john From: Eric Lampi ericla...@gmail.commailto:ericla...@gmail.com To: john clausing jclausin...@yahoo.commailto:jclausin...@yahoo.com; softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com Sent: Friday, October 5, 2012 2:21 PM Subject: Re: Runtime Error R6025 You don't have everything installed in one giant workgroup do you? On Fri, Oct 5, 2012 at 1:42 PM, john clausing jclausin...@yahoo.commailto:jclausin...@yahoo.com wrote: no particles,.but lots of hair? j From: Rob Chapman tekano@gmail.commailto:tekano@gmail.com To: john clausing jclausin...@yahoo.commailto:jclausin...@yahoo.com; softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com Sent: Friday, October 5, 2012 1:41 PM Subject: Re: Runtime Error R6025 particles? one pinged off into infinity? On 5 October 2012 18:25, john clausing jclausin...@yahoo.commailto:jclausin...@yahoo.com wrote: thanks, the odd part is all the other frames render just fine? weird! From: Ben Houston b...@exocortex.commailto:b...@exocortex.com To: Adam Seeley adam_see...@yahoo.commailto:adam_see...@yahoo.com; softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com Sent: Friday, October 5, 2012 1:20 PM Subject: Re: Runtime Error R6025 It is a coding error in a C++ program, it likely isn't an install error. If it is crashing in Softimage, it is a Softimage error. If it is crashing in Arnold it is an Arnold error. It may also be another third party plugin that is causing this. You can try to work around it by changing how you are doing things and then hopefully the erroneous code will be avoided... -ben On Fri, Oct 5, 2012 at 1:17 PM, Adam Seeley adam_see...@yahoo.commailto:adam_see...@yahoo.com wrote: Quite familar with this one Runtime Error R6025: Attempt to render Scene file some point after 16:00 on a Friday. Automatic Random Error generated. Please try again on Monday when everything will just work as if like magic. Adam. From: john clausing jclausin...@yahoo.commailto:jclausin...@yahoo.com To: softimage list softimage list Softimage@listproc.Autodesk.commailto:Softimage@listproc.Autodesk.com Sent: Friday, 5 October 2012, 18:11 Subject: Runtime Error R6025 Hello, I'm rendering a sequence who contents changes very little.. Frame 60 out of 100 refuses to render and both locally and on the farm i get the R6025 error. I am rendering with Arnold, and have reinstalled softimage 2013 any ideas? thanks, john -- Best regards, Ben Houston Voice: 613-762-4113 Skype: ben.exocortex Twitter: @exocortexcom http://Exocortex.com - Passionate CG Software Professionals. -- Freelance 3D and VFX animator http://vimeopro.com/user7979713/3d-work -- Freelance 3D and VFX animator http://vimeopro.com/user7979713/3d-work attachment: winmail.dat