Re: Modeling Options
Thanks for the info, Jonathan. Never too late to learn new stuff, but perhaps a bit pricey if only for modeling if you don't do that much of it :) MB > Den 15. februar 2018 klokken 17:44 skrev Jonathan Moore >: > > > Full transparency - I'm an alpha/beta tester for Foundry but IMHO nothing > beats Modo for asset creation. It used to be flakey and bug ridden but > since Modo 10 they moved over to a new incremental development strategy and > things are far more solid. You can rent or buy outright but with the rental > being circa $500 per annum it's actually not a bad route to take, > especially if your unsure about any long term commitment. There's three > major point releases each year, and you can set up a new 30 day demo for > each. It's not an oversight, it's something the Modo team decided to > provide seeing as each release brings significant new features. > > When you start moving beyond the asset creation toolset things are still a > little flakey, badly designed or both. But for modelling, UVing etc nothing > comes close for the money. > > Blender is obviously an option, but I think the modelling UX in Modo is > worth the price of entry alone. > > On 15 February 2018 at 16:23, Morten Bartholdy wrote: > > > Marc, are you by any chance trying to install on a Win10 machine? > > > > I had the exact same problem and some googling provided a solution: > > > > https://forums.autodesk.com/t5/softimage-forum/softimage- > > 2015-error-1603-on-windows-10/td-p/6993199 > > > > Quote: > > > > Re: Softimage 2015 - error 1603 on Windows 10 > > Options > > 04-05-2017 02:20 PM in reply to: brissef2 > > OK I found the solution. > > > > I had to uninstall the MS Visual C++ redist. 2012, both x86 and x64 > > versions, that were prevously installed on my machine. > > > > That apparently was the cause of the problem, since the setup process kept > > rolling back the Softimage installation without those two installed before > > it. > > > > Mysteries of Windows... > > > > Now there's another problem: the software doesn't support text scaling, so > > with my 21:9 high res monitor the fonts and the icons are too small to read! > > > > End Quote" > > > > This actually worked on my end, so you can give it a go. > > > > If everything fails, I would go with Blender if I were you. > > > > > > Good luck! > > > > Best Morten > > > > > > > Den 14. februar 2018 klokken 19:01 skrev Marc Brinkley < > > marc.brink...@microsoft.com>: > > > > > > > > > Hey List > > > > > > So what are people modeling in these days? I am trying to get Soft up > > and running again so I can do some basic modelling and what not. Mostly for > > myself. But installation is not going so well. The usual 1603 error that I > > am trying to diagnose without much luck. Even the ex-si support blog has > > not be able to clue me in. > > > > > > But it got me wondering what people are using for modelling software > > these days in case I cant get Soft running again (which I have to admit is > > going happen some day). > > > > > > I would prefer a non-ADSK product for obvious bias. I have never been > > able to get comfortable in Maya for modeling. It feels like modeling with > > mittens on. > > > > > > Thoughts? > > > -- > > > Softimage Mailing List. > > > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com > > with "unsubscribe" in the subject, and reply to confirm. > > -- > > Softimage Mailing List. > > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com > > with "unsubscribe" in the subject, and reply to confirm. > > > -- > Softimage Mailing List. > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with > "unsubscribe" in the subject, and reply to confirm. -- Softimage Mailing List. To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with "unsubscribe" in the subject, and reply to confirm.
RE: Modeling Options
We have Modo here at work and I installed it to kick the tires. See how that goes. I think we have 11 around here somewhere. Right now its 901. Thanks for the advise! From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Angus Davidson Sent: Thursday, February 15, 2018 10:28 AM To: Official Softimage Users Mailing List. https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwIFAg=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=-SuwFT3-5vlavCnNWAUvL9qk338vyHaJl_QsPFvpRLs=zLv3hdHPdpd-WdcrufneW_sByV67LyXVx2AER7jB_zM= <softimage@listproc.autodesk.com> Subject: RE: Modeling Options Well I will continue to make noise until the change happens ;) -- ICT Project Manager Digital Arts Wits School of the Arts angus.david...@wits.ac.za<mailto:angus.david...@wits.ac.za> 011 717 4683 From: softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com> [softimage-boun...@listproc.autodesk.com] on behalf of Jonathan Moore [jonathan.moo...@gmail.com] Sent: 15 February 2018 08:08 PM To: Official Softimage Users Mailing List. https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwIFAg=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=-SuwFT3-5vlavCnNWAUvL9qk338vyHaJl_QsPFvpRLs=zLv3hdHPdpd-WdcrufneW_sByV67LyXVx2AER7jB_zM= Subject: Re: Modeling Options As much as I would like to use Modo, unless they realise that Modo in education is important for them to gain momentum, they will forever be a niche DCC. Couldn't agree more Angus. And you'll be pleased to know I'm not the only person voicing this concern. This info has nothing to do with the beta, else I'd face the wrath of beta compliance! The sucky position on education with Modo doesn't come from Foundry London, it's a hangover from the Luxology days. Anything that looks like it can cannibalize the base (sales) is out. Just look at Modo Indie languishing at Modo 10 on the Steam store, with Modo 12 soon to be released. One day the ops/marketing team in LA will realise that education and indie are a way to expand future Modo sales, not diminish them. On 15 February 2018 at 16:53, Angus Davidson <angus.david...@wits.ac.za<mailto:angus.david...@wits.ac.za>> wrote: I really love Modo, Have ever since it forked ish from Lightwave. When Autodesk double tapped Softimage for education we pushed incredibly hard to have Modo as our DCC instead of having to go to back to Maya. In the end the Foundries unwillingness to match Autocad's Educational policies forced us into 3 years of Maya Hell. We have now moved to Blender and its actually going well. As much as I would like to use Modo, unless they realise that Modo in education is important for them to gain momentum, they will forever be a niche DCC. -- ICT Project Manager Digital Arts Wits School of the Arts angus.david...@wits.ac.za<mailto:angus.david...@wits.ac.za> 011 717 4683 From: softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com> [softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>] on behalf of Jonathan Moore [jonathan.moo...@gmail.com<mailto:jonathan.moo...@gmail.com>] Sent: 15 February 2018 06:44 PM To: Official Softimage Users Mailing List. https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwIFAg=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=-SuwFT3-5vlavCnNWAUvL9qk338vyHaJl_QsPFvpRLs=zLv3hdHPdpd-WdcrufneW_sByV67LyXVx2AER7jB_zM=<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwMFaQ=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=JstkCcH-BFmlDx70-KSlt-abib2kD1QUhDpToK55hsQ=zfc7PC0s5A6lTjtaFqtanJALi2YQu25u4r1wReoqyiw=> Subject: Re: Modeling Options Full transparency - I'm an alpha/beta tester for Foundry but IMHO nothing beats Modo for asset creation. It used to be flakey and bug ridden but since Modo 10 they moved over to a new incremental development strategy and things are far more solid. You can rent or buy outright but with the rental being circa $500 per annum it's actually not a bad route to take, especially if your unsure about any long term commitment. There's three major point releases each year, and you can set up a new 30 day demo for each. It's not an oversight, it's something the Modo team decided to provide seeing as each release brings significant new features. When you start moving beyond the asset creation toolset things are still a little flakey, badly designed or both. But for modelling, UVing etc nothing comes close for the money.
RE: Modeling Options
Yeah thanks! I found those as well and I have repeatedly uninstalled the 2012 redist packages and still no luck. I am now getting an error with the .PIT file. I had to drop the installing for a bit to work on some other issues. I will get back to it at some point. Possible its something else too. Just need to keep poking at it. Thanks for help, very much appreciated! Here was my install log in case anyone spots something I missed 2018/2/14:09:40:41 marcmarc-DT === Setup started on marc-DT by marc === 2018/2/14:09:40:41 marcmarc-DT Path_Length: 142 2018/2/14:09:40:41 marcmarc-DT Current Directory C:\Users\marc\AppData\Local\Temp\_AI51BD.tmp 2018/2/14:09:40:41 marcmarc-DT Launch 2018/2/14:09:40:41 marcmarc-DT PageOpen LaunchDialog 2018/2/14:09:40:43 marcmarc-DT PageOpen LicenseDialog 2018/2/14:09:40:45 marcmarc-DT PageOpen ProductInfoDialog 2018/2/14:09:41:29 marcmarc-DT PageOpen ProductSelectionDialog2 2018/2/14:09:42:29 marcmarc-DT PageOpen FullProgressDialog 2018/2/14:09:42:29 marcmarc-DT Installing Microsoft Visual C++ 2012 Redistributable (x86): "C:\Autodesk\Autodesk_Softimage_2015_English_Japanese_Win_64bit_dlm\3rdParty\x86\VCRedist\2012\vcredist_x86.exe" /install /quiet /norestart 2018/2/14:09:42:30 marcmarc-DT Install Microsoft Visual C++ 2012 Redistributable (x86) Succeeded 2018/2/14:09:42:30 marcmarc-DT Installing Microsoft Visual C++ 2012 Redistributable (x64): "C:\Autodesk\Autodesk_Softimage_2015_English_Japanese_Win_64bit_dlm\3rdParty\x64\VCRedist\2012\vcredist_x64.exe" /install /quiet /norestart 2018/2/14:09:42:30 marcmarc-DT Install Microsoft Visual C++ 2012 Redistributable (x64) Succeeded 2018/2/14:09:42:30 marcmarc-DT Installing DirectX(r) Runtime: "C:\Autodesk\Autodesk_Softimage_2015_English_Japanese_Win_64bit_dlm\3rdParty\DirectX\DXSETUP.exe" /silent 2018/2/14:09:42:36 marcmarc-DT Install DirectX(r) Runtime Succeeded 2018/2/14:09:42:37 marcmarc-DT Installing Autodesk(r) Softimage(r) 2015: TRANSFORMS="C:\Users\marc\AppData\Local\Temp\_AI51BD.tmp\x64\Softimage\Softimage-standalone.mst" ADSK_EULA_STATUS=#1 ADSK_SOURCE_ROOT="C:\Autodesk\Autodesk_Softimage_2015_English_Japanese_Win_64bit_dlm\" INSTALLDIR="C:\Program Files\Autodesk\Softimage 2015\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1 2018/2/14:09:46:01 marcmarc-DT Install Autodesk(r) Softimage(r) 2015 FailedInstallation aborted, Result=1603 2018/2/14:09:46:01 marcmarc-DT Rollback DirectX(r) Runtime FailedFailure is ignored, Result=1619 2018/2/14:09:46:01 marcmarc-DT Rollback Microsoft Visual C++ 2012 Redistributable (x64) FailedInstallation aborted, Result=1619 2018/2/14:09:46:01 marcmarc-DT Rollback Microsoft Visual C++ 2012 Redistributable (x86) FailedInstallation aborted, Result=1619 -Original Message- From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Morten Bartholdy Sent: Thursday, February 15, 2018 8:25 AM To: Official Softimage Users Mailing List. https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwIFAg=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=KJbQxd8REyTq_HhWqLOgKxaO_hlpI9gg0NpvljSrNHE=86qgiPg5OAWukwOiAXn__rV0eNndE4HZA5g5NrTSaDw= <softimage@listproc.autodesk.com> Subject: Re: Modeling Options Oh and check this one too: https://forums.autodesk.com/t5/installation-licensing/some-products-fail-to-install-result-1603/td-p/3382347 MB > Den 15. februar 2018 klokken 17:23 skrev Morten Bartholdy > <x...@colorshopvfx.dk>: > > > Marc, are you by any chance trying to install on a Win10 machine? > > I had the exact same problem and some googling provided a solution: > > https://forums.autodesk.com/t5/softimage-forum/softimage-2015-error-16 > 03-on-windows-10/td-p/6993199 > > Quote: > > Re: Softimage 2015 - error 1603 on Windows 10 Options > 04-05-2017 02:20 PM in reply to: brissef2 OK I found the solution. > > I had to uninstall the MS Visual C++ redist. 2012, both x86 and x64 versions, > that were prevously installed on my machine. > > That apparently was the cause of the problem, since
RE: Modeling Options
Well I will continue to make noise until the change happens ;) -- ICT Project Manager Digital Arts Wits School of the Arts angus.david...@wits.ac.za 011 717 4683 From: softimage-boun...@listproc.autodesk.com [softimage-boun...@listproc.autodesk.com] on behalf of Jonathan Moore [jonathan.moo...@gmail.com] Sent: 15 February 2018 08:08 PM To: Official Softimage Users Mailing List. https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwIFAw=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=1OzbXl-u6yQ3rGd1BbDnMMy7l1P51YUcwfFy6yABY4g=R84lPKqrk1_MjWMQRrtUBMHMmNdi6cuKKOZJzU3ZBjE= Subject: Re: Modeling Options As much as I would like to use Modo, unless they realise that Modo in education is important for them to gain momentum, they will forever be a niche DCC. Couldn't agree more Angus. And you'll be pleased to know I'm not the only person voicing this concern. This info has nothing to do with the beta, else I'd face the wrath of beta compliance! The sucky position on education with Modo doesn't come from Foundry London, it's a hangover from the Luxology days. Anything that looks like it can cannibalize the base (sales) is out. Just look at Modo Indie languishing at Modo 10 on the Steam store, with Modo 12 soon to be released. One day the ops/marketing team in LA will realise that education and indie are a way to expand future Modo sales, not diminish them. On 15 February 2018 at 16:53, Angus Davidson <angus.david...@wits.ac.za<mailto:angus.david...@wits.ac.za>> wrote: I really love Modo, Have ever since it forked ish from Lightwave. When Autodesk double tapped Softimage for education we pushed incredibly hard to have Modo as our DCC instead of having to go to back to Maya. In the end the Foundries unwillingness to match Autocad's Educational policies forced us into 3 years of Maya Hell. We have now moved to Blender and its actually going well. As much as I would like to use Modo, unless they realise that Modo in education is important for them to gain momentum, they will forever be a niche DCC. -- ICT Project Manager Digital Arts Wits School of the Arts angus.david...@wits.ac.za<mailto:angus.david...@wits.ac.za> 011 717 4683 From: softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com> [softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>] on behalf of Jonathan Moore [jonathan.moo...@gmail.com<mailto:jonathan.moo...@gmail.com>] Sent: 15 February 2018 06:44 PM To: Official Softimage Users Mailing List. https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwIFAw=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=1OzbXl-u6yQ3rGd1BbDnMMy7l1P51YUcwfFy6yABY4g=R84lPKqrk1_MjWMQRrtUBMHMmNdi6cuKKOZJzU3ZBjE=<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist=DwMFaQ=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=JstkCcH-BFmlDx70-KSlt-abib2kD1QUhDpToK55hsQ=zfc7PC0s5A6lTjtaFqtanJALi2YQu25u4r1wReoqyiw=> Subject: Re: Modeling Options Full transparency - I'm an alpha/beta tester for Foundry but IMHO nothing beats Modo for asset creation. It used to be flakey and bug ridden but since Modo 10 they moved over to a new incremental development strategy and things are far more solid. You can rent or buy outright but with the rental being circa $500 per annum it's actually not a bad route to take, especially if your unsure about any long term commitment. There's three major point releases each year, and you can set up a new 30 day demo for each. It's not an oversight, it's something the Modo team decided to provide seeing as each release brings significant new features. When you start moving beyond the asset creation toolset things are still a little flakey, badly designed or both. But for modelling, UVing etc nothing comes close for the money. Blender is obviously an option, but I think the modelling UX in Modo is worth the price of entry alone. On 15 February 2018 at 16:23, Morten Bartholdy <x...@colorshopvfx.dk<mailto:x...@colorshopvfx.dk>> wrote: Marc, are you by any chance trying to install on a Win10 machine? I had the exact same problem and some googling provided a solution: https://forums.autodesk.com/t5/softimage-forum/softimage-2015-error-1603-on-windows-10/td-p/6993199 Quote: Re: Softimage 2015 - error 1603 on Windows 10 Options 04-05-2017 02:20 PM in reply to: brissef2 OK I found the solution. I had to uninstall the MS Visual C++ redist. 2012, both x86 and x64 versions, that were prevously installed on my machine. That apparently was the cause of the problem, since the setup process kept rolling back the Softimage installa
Re: Modeling Options
> > As much as I would like to use Modo, unless they realise that Modo in > education is important for them to gain momentum, they will forever be a > niche DCC. Couldn't agree more Angus. And you'll be pleased to know I'm not the only person voicing this concern. This info has nothing to do with the beta, else I'd face the wrath of beta compliance! The sucky position on education with Modo doesn't come from Foundry London, it's a hangover from the Luxology days. Anything that looks like it can cannibalize the base (sales) is out. Just look at Modo Indie languishing at Modo 10 on the Steam store, with Modo 12 soon to be released. One day the ops/marketing team in LA will realise that education and indie are a way to expand future Modo sales, not diminish them. On 15 February 2018 at 16:53, Angus Davidson <angus.david...@wits.ac.za> wrote: > I really love Modo, Have ever since it forked ish from Lightwave. > > When Autodesk double tapped Softimage for education we pushed incredibly > hard to have Modo as our DCC instead of having to go to back to Maya. > > In the end the Foundries unwillingness to match Autocad's Educational > policies forced us into 3 years of Maya Hell. > > We have now moved to Blender and its actually going well. > > As much as I would like to use Modo, unless they realise that Modo in > education is important for them to gain momentum, they will forever be a > niche DCC. > > > -- > ICT Project Manager > Digital Arts > Wits School of the Arts > angus.david...@wits.ac.za > 011 717 4683 > -- > *From:* softimage-boun...@listproc.autodesk.com [ > softimage-boun...@listproc.autodesk.com] on behalf of Jonathan Moore [ > jonathan.moo...@gmail.com] > *Sent:* 15 February 2018 06:44 PM > *To:* Official Softimage Users Mailing List. > https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_=DwIFaQ=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA=JstkCcH-BFmlDx70-KSlt-abib2kD1QUhDpToK55hsQ=gu3AXMBwufkmOq6rmbJ_TzHA03M40OElbFAPifPz5z8= > forum/#!forum/xsi_list > *Subject:* Re: Modeling Options > > Full transparency - I'm an alpha/beta tester for Foundry but IMHO nothing > beats Modo for asset creation. It used to be flakey and bug ridden but > since Modo 10 they moved over to a new incremental development strategy and > things are far more solid. You can rent or buy outright but with the rental > being circa $500 per annum it's actually not a bad route to take, > especially if your unsure about any long term commitment. There's three > major point releases each year, and you can set up a new 30 day demo for > each. It's not an oversight, it's something the Modo team decided to > provide seeing as each release brings significant new features. > > When you start moving beyond the asset creation toolset things are still a > little flakey, badly designed or both. But for modelling, UVing etc nothing > comes close for the money. > > Blender is obviously an option, but I think the modelling UX in Modo is > worth the price of entry alone. > > On 15 February 2018 at 16:23, Morten Bartholdy <x...@colorshopvfx.dk> > wrote: > >> Marc, are you by any chance trying to install on a Win10 machine? >> >> I had the exact same problem and some googling provided a solution: >> >> https://forums.autodesk.com/t5/softimage-forum/softimage-201 >> 5-error-1603-on-windows-10/td-p/6993199 >> >> Quote: >> >> Re: Softimage 2015 - error 1603 on Windows 10 >> Options >> 04-05-2017 02:20 PM in reply to: brissef2 >> OK I found the solution. >> >> I had to uninstall the MS Visual C++ redist. 2012, both x86 and x64 >> versions, that were prevously installed on my machine. >> >> That apparently was the cause of the problem, since the setup process >> kept rolling back the Softimage installation without those two installed >> before it. >> >> Mysteries of Windows... >> >> Now there's another problem: the software doesn't support text scaling, >> so with my 21:9 high res monitor the fonts and the icons are too small to >> read! >> >> End Quote" >> >> This actually worked on my end, so you can give it a go. >> >> If everything fails, I would go with Blender if I were you. >> >> >> Good luck! >> >> Best Morten >> >> >> > Den 14. februar 2018 klokken 19:01 skrev Marc Brinkley < >> marc.brink...@microsoft.com>: >> > >> > >> > Hey List >> > >> > So what are people modeling in these days? I am trying to get Soft up >> and running again so I can do some basic modelling
Re: Modeling Options
Marc, are you by any chance trying to install on a Win10 machine? I had the exact same problem and some googling provided a solution: https://forums.autodesk.com/t5/softimage-forum/softimage-2015-error-1603-on-windows-10/td-p/6993199 Quote: Re: Softimage 2015 - error 1603 on Windows 10 Options 04-05-2017 02:20 PM in reply to: brissef2 OK I found the solution. I had to uninstall the MS Visual C++ redist. 2012, both x86 and x64 versions, that were prevously installed on my machine. That apparently was the cause of the problem, since the setup process kept rolling back the Softimage installation without those two installed before it. Mysteries of Windows... Now there's another problem: the software doesn't support text scaling, so with my 21:9 high res monitor the fonts and the icons are too small to read! End Quote" This actually worked on my end, so you can give it a go. If everything fails, I would go with Blender if I were you. Good luck! Best Morten > Den 14. februar 2018 klokken 19:01 skrev Marc Brinkley >: > > > Hey List > > So what are people modeling in these days? I am trying to get Soft up and > running again so I can do some basic modelling and what not. Mostly for > myself. But installation is not going so well. The usual 1603 error that I am > trying to diagnose without much luck. Even the ex-si support blog has not be > able to clue me in. > > But it got me wondering what people are using for modelling software these > days in case I cant get Soft running again (which I have to admit is going > happen some day). > > I would prefer a non-ADSK product for obvious bias. I have never been able to > get comfortable in Maya for modeling. It feels like modeling with mittens on. > > Thoughts? > -- > Softimage Mailing List. > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with > "unsubscribe" in the subject, and reply to confirm. -- Softimage Mailing List. To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with "unsubscribe" in the subject, and reply to confirm.