[speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4
- Original Message - From: "Conall O'Brien" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, March 31, 2004 4:29 AM Subject: [speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4 > Mar 31 03:18:52 gonzo modem_run[21700]: BLOCK1 > Mar 31 03:18:52 gonzo modem_run[21700]: Retrying to upload microcode > (#0) > Mar 31 03:18:54 gonzo kernel: usb 1-2: bulk timeout on ep5in > Mar 31 03:18:54 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x85 > len 512 ret -110 > Mar 31 03:18:56 gonzo kernel: usb 1-2: bulk timeout on ep5out > Mar 31 03:18:56 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x5 > len 935 ret -110 > Mar 31 03:18:56 gonzo modem_run[21700]: BLOCK1 > A firmware is already loaded. Unplug the modem and retry Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4
On Tue, Mar 30, 2004 at 08:09:32PM IST, Michele <[EMAIL PROTECTED]> incoherently babbled: > > With Silver Speedtouch USB 330 rev 4.00 i found that the modem can work well with > the speedtouch-1.2 package. the command line is as follows: > > /usr/local/sbin/modem_run -v 1 -a /path/to/ZZZLP1.eni -f /path/to/ZZZLP2.eni > > this is a typical output: > > My output starts out promising, but I soon run into the BLOCK errors. the modem_run retries 10 times before giving up. Mar 31 03:18:47 gonzo modem_run[21700]: modem_run version 1.2 started by root uid 0 Mar 31 03:18:47 gonzo modem_run[21700]: Found SpeedTouch USB modem Mar 31 03:18:47 gonzo modem_run[21700]: Modem revision: 0400 Mar 31 03:18:48 gonzo modem_run[21700]: Best offset 0 with probability 100% Mar 31 03:18:48 gonzo modem_run[21700]: Best offset927 with probability 100% Mar 31 03:18:48 gonzo modem_run[21700]: Firmware info (CRC:0x69636579, Size:935, Checked: Yes, Alcatel/Thomson Boot block (new)) Mar 31 03:18:48 gonzo modem_run[21700]: Best offset 0 with probability 100% Mar 31 03:18:48 gonzo modem_run[21700]: Best offset 775501 with probability 100% Mar 31 03:18:48 gonzo modem_run[21700]: Firmware info (CRC:0x0223733c, Size:775509, Checked: Yes, 1.0.10 - Win32 Rev 0400 SACHU3) Mar 31 03:18:50 gonzo kernel: usb 1-2: bulk timeout on ep5in Mar 31 03:18:50 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 Mar 31 03:18:52 gonzo kernel: usb 1-2: bulk timeout on ep5out Mar 31 03:18:52 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 935 ret -110 Mar 31 03:18:52 gonzo modem_run[21700]: BLOCK1 Mar 31 03:18:52 gonzo modem_run[21700]: Retrying to upload microcode (#0) Mar 31 03:18:54 gonzo kernel: usb 1-2: bulk timeout on ep5in Mar 31 03:18:54 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 Mar 31 03:18:56 gonzo kernel: usb 1-2: bulk timeout on ep5out Mar 31 03:18:56 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 935 ret -110 Mar 31 03:18:56 gonzo modem_run[21700]: BLOCK1 -- Conall O'Brien +353 (0)87 9194139 | http://www.conall.net GPG Key: http://www.conall.net/gpg/ "This 'telephone' has too many shortcomings to be seriously considered as a means of communication." - Western Union internal memo, 1876. -- Attached file included as plaintext by Listar -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAai0TVg0IYe59x04RAlvYAKDRxbJPoXOcAcvVHfJx90zsFkzfEACgqcZV vlBgHS5lSCVOsZAfFmWl8UY= =xBN3 -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Upgrade to 1.2 not successful
- Original Message - From: "Hans-Stefan Suhle" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 29, 2004 9:51 PM Subject: [speedtouch] Upgrade to 1.2 not successful > > Hello, * > > Currently, I am running 1.2-beta3. > Today, I tried to upgrade to 1.2 > > Nevertheless, having tried it, I kept receiving the following: > > Mar 28 18:04:33 athlon modem_run[28450]: modem_run version 1.2 started > by hss uid 0 > Mar 28 18:04:33 athlon modem_run[28450]: Found SpeedTouch USB modem > Mar 28 18:04:33 athlon modem_run[28450]: Modem revision: > Mar 28 18:04:33 athlon modem_run[28450]: Best offset 0 with > probability 87% > Mar 28 18:04:33 athlon modem_run[28450]: Unable to locate boot code in > /opt/adsl/KQD6P2.eni You need to read modem_run --help and use the new -a option with kqd6p1.eni or boot.v123.bin Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4
- Original Message - From: "Edouard Gomez" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, March 30, 2004 8:52 PM Subject: [speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4 > > Conall O'Brien ([EMAIL PROTECTED]) wrote: > > Mar 30 13:12:13 gonzo modem_run[7633]: modem_run version 1.2 started by conall uid 0 > > Mar 30 13:12:15 gonzo modem_run[7633]: Unable to locate firmware in /usr/src/firmware/alcaudsl.sys > > The answer is all in there. There is no firmware in the file you passed > in the -f option. Try to locate *.eni files in the windows install, and > use these one. > And if you look at the size of V3.0x alcaudsl.sys file (69 kbytes), you can clearly understand there is no more firmware inside (all larger than 500 kbytes) > See option -a and option -f description in the manual page(7) > > -- > Edouard Gomez > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4
With Silver Speedtouch USB 330 rev 4.00 i found that the modem can work well with the speedtouch-1.2 package. the command line is as follows: /usr/local/sbin/modem_run -v 1 -a /path/to/ZZZLP1.eni -f /path/to/ZZZLP2.eni this is a typical output: Mar 29 00:05:32 atalante modem_run[4439]: Found SpeedTouch USB modem Mar 29 00:05:32 atalante modem_run[4439]: Modem revision: 0400 Mar 29 00:05:32 atalante modem_run[4439]: Best offset 0 with probability 100% Mar 29 00:05:32 atalante modem_run[4439]: Best offset927 with probability 100% Mar 29 00:05:32 atalante modem_run[4439]: Firmware info (CRC:0x69636579, Size:935, Checked: Yes, Alcatel/Thomson Boot block (new)) Mar 29 00:05:32 atalante modem_run[4439]: Best offset 0 with probability 100% Mar 29 00:05:32 atalante modem_run[4439]: Best offset 775501 with probability 100% Mar 29 00:05:32 atalante modem_run[4439]: Firmware info (CRC:0x0223733c, Size:775509, Checked: Yes, 1.0.10 - Win32 Rev 0400 SACHU3) Mar 29 00:05:34 atalante kernel: usb_control/bulk_msg: timeout Mar 29 00:05:34 atalante kernel: usbdevfs: USBDEVFS_BULK failed dev 7 ep 0x85 len 512 ret -110 Mar 29 00:05:34 atalante modem_run[4439]: BLOCK1 :935 bytes uploaded : OK Mar 29 00:05:34 atalante modem_run[4439]: BLOCK2 :511 bytes downloaded : OK Mar 29 00:05:37 atalante modem_run[4439]: BLOCK3 : 775509 bytes uploaded : OK Mar 29 00:05:37 atalante modem_run[4439]: BLOCK4 :511 bytes downloaded : OK Mar 29 00:05:38 atalante modem_run[4439]: Modem reference : 35720370.. Mar 29 00:06:38 atalante modem_run[4439]: ADSL synchronization has been obtained Mar 29 00:06:38 atalante modem_run[4439]: ADSL line is up (800 kbit/s down | 320 kbit/s up) then you have to start some flavour of ppp... Michele Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4
On Tue, Mar 30, 2004 at 07:21:20PM IST, [EMAIL PROTECTED] <[EMAIL PROTECTED]> incoherently babbled: > > >il te manque le microcode du speedtouch 330(voir fichier joint) >que tu dois mettre dans /usr/src/firmware/alcaudsl.sys > > USBDEVFS_BULK failed = ton usb n'est pas montÃ: > > mount -t usbdevfs none /proc/bus/usb > > si ca peut t'aider!!! > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se dÃsinscrire : mailto:[EMAIL PROTECTED] > > I don't speak French and Altavista's Babelfish doesn't translate your message very well, but I suspect it's suggesting I mount /proc/bus/usb with the usbdevfs file system (by looking at the command). The problem is, 2.6 kernels don't use usbdevfs, they use usbfs to mount /proc/bus/usb, which my system already does. Hence the usbfs reference in the error messages I'm getting... See http://www.linux.org.uk/~davej/docs/post-halloween-2.6.txt for more information about usbdevfs --> usbfs. -- Conall O'Brien +353 (0)87 9194139 | http://www.conall.net GPG Key: http://www.conall.net/gpg/ "This 'telephone' has too many shortcomings to be seriously considered as a means of communication." - Western Union internal memo, 1876. -- Attached file included as plaintext by Listar -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAacTAVg0IYe59x04RAojfAJ4z3qlsOu0Z2Jn+L6EzTqkiAt3YVACgq5F7 Kf88guDBQIzpU4+/+m90ZcE= =YLp+ -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] PPP doesn't notice that it lose the connection
Hi there ;-) Maybe someone found a similar problem: after having downloaded the firmware into the modem (SpeedTouch 330 rev 4.00) i start pppd as explained in the howto and everything works fine but... at random, after some hours (sometime days), the network become unusable: no ping even to the P-t-P host ... Mar 30 11:59:00 atalante last message repeated 2852 times Mar 30 11:59:00 atalante /USR/SBIN/CRON[17482]: (root) CMD ( rm -f /var/spool/ Mar 30 11:59:00 atalante pppoa3[17161]: Clp bit is ON Mar 30 11:59:31 atalante last message repeated 5641 times ... Mar 30 12:21:29 atalante last message repeated 4284 times then silence (but CRON)! pkill -9 pppd pkill -9 pppoa3 pppd call adsl and it works newly fine (_with another IP_). What can it be? Has anyone idea how could I restore the connection without having another IP. Why ppp do not understand that the connection is lost? And finally what is this god-bless-it Clp bit that is ON (and I know it is ON because my computer said me that was at least 1e100 times, and it was never OFF, thing that imply that these log lines bring me an information rate of about 0.0) Thanks in advance :-) Michele Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Upgrade to 1.2 not successful
Hello, * Currently, I am running 1.2-beta3. Today, I tried to upgrade to 1.2 Nevertheless, having tried it, I kept receiving the following: Mar 28 18:04:33 athlon modem_run[28450]: modem_run version 1.2 started by hss uid 0 Mar 28 18:04:33 athlon modem_run[28450]: Found SpeedTouch USB modem Mar 28 18:04:33 athlon modem_run[28450]: Modem revision: Mar 28 18:04:33 athlon modem_run[28450]: Best offset 0 with probability 87% Mar 28 18:04:33 athlon modem_run[28450]: Best offset 0 with probability 100% Mar 28 18:04:33 athlon modem_run[28450]: Best offset 762642 with probability 100% Mar 28 18:04:33 athlon modem_run[28450]: Firmware info (CRC:0x78039fed, Size:762650, Checked: Yes, 3.0.6 - MacOSX - Win32) Mar 28 18:04:33 athlon modem_run[28450]: Unable to locate boot code in /opt/adsl/KQD6P2.eni Mar 28 18:04:33 athlon pppd[28452]: pppd 2.4.1 started by root, uid 0 Mar 28 18:04:33 athlon pppd[28452]: using channel 1 Mar 28 18:04:33 athlon pppd[28452]: Using interface ppp0 Mar 28 18:04:33 athlon pppd[28452]: Connect: ppp0 <--> /dev/pts/8 Mar 28 18:04:33 athlon pppoa3[28455]: pppoa3 version 1.2 started by root (uid 0) Mar 28 18:04:33 athlon pppoa3[28455]: Control thread ready Mar 28 18:04:33 athlon pppoa3[28460]: host --> pppoa3 --> modem stream ready Mar 28 18:04:33 athlon pppoa3[28468]: modem --> pppoa3 --> host stream ready Mar 28 18:04:33 athlon pppoa3[28468]: Error reading usb urb Mar 28 18:04:33 athlon pppoa3[28455]: Woken by a sem_post event -> Exiting Mar 28 18:04:33 athlon pppoa3[28455]: Read from usb Canceled Mar 28 18:04:33 athlon pppoa3[28455]: Write to usb Canceled Mar 28 18:04:33 athlon pppoa3[28455]: Exiting Mar 28 18:04:33 athlon kernel: usb-uhci.c: uhci_submit_urb: pipesize for pipe c0038380 is zero Mar 28 18:04:33 athlon kernel: usbdevfs: usb_submit_urb returned -90 Mar 28 18:04:33 athlon pppd[28452]: Script /usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 28455), status = 0xff00 Mar 28 18:04:33 athlon pppd[28452]: Modem hangup Mar 28 18:04:33 athlon pppd[28452]: Connection terminated. When I connect using my 1.2-beta3, I get the following: Mar 28 18:23:40 athlon modem_run[22026]: modem_run version 1.2-beta3 started by hss uid 0 Mar 28 18:23:40 athlon modem_run[22026]: Found ALCATEL SpeedTouch USB modem Mar 28 18:23:40 athlon modem_run[22026]: Best offset 0 with probability 100% Mar 28 18:23:40 athlon modem_run[22026]: Best offset 762642 with probability 100% Mar 28 18:23:40 athlon modem_run[22026]: Firmware information (CRC:0x78039fed, Size:762650, Unknown revision - Please report the CRC and size with the revision number to [EMAIL PROTECTED]) Mar 28 18:23:42 athlon modem_run[22026]: BLOCK1 :883 bytes uploaded : OK Mar 28 18:23:43 athlon modem_run[22026]: BLOCK2 :511 bytes downloaded : OK Mar 28 18:23:45 athlon modem_run[22026]: BLOCK3 : 762650 bytes uploaded : OK Mar 28 18:23:45 athlon modem_run[22026]: BLOCK4 :511 bytes downloaded : OK Mar 28 18:23:46 athlon modem_run[22026]: Modem reference : 3EC18607GCAB01 Mar 28 18:24:00 athlon modem_run[22072]: Sending a signal to notify the adsl up state Mar 28 18:24:00 athlon modem_run[22026]: ADSL synchronization has been obtained Mar 28 18:24:00 athlon modem_run[22026]: ADSL line is up (2464 kbit/s down | 128 kbit/s up) Mar 28 18:24:00 athlon pppd[22485]: pppd 2.4.1 started by root, uid 0 Mar 28 18:24:00 athlon pppd[22485]: using channel 1 Mar 28 18:24:00 athlon pppoa3[22490]: pppoa3 version 1.2-beta3 started by root (uid 0) Mar 28 18:24:00 athlon pppoa3[22490]: Control thread ready Mar 28 18:24:00 athlon pppd[22485]: Using interface ppp0 Mar 28 18:24:00 athlon pppd[22485]: Connect: ppp0 <--> /dev/pts/19 Mar 28 18:24:00 athlon pppoa3[22517]: host --> pppoa3 --> modem stream ready Mar 28 18:24:00 athlon pppoa3[22518]: modem --> pppoa3 --> host stream ready All I did was to compile 1.2 All other files and settings are un-changed. Any help or suggestions? Thank you all! -- Hans-Stefan Suhle <[EMAIL PROTECTED]> Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Forcing an upload/download ADSL speed
> I want my 10-15kB/s in upload back, but my main concern is that at some > point the ISP will remove the 640kb/s cap and let me have the full > 1.5Mb/s that the phone companies' DSL allows, and I would like to be > ready for that when it happens. Try using multiple send/receive urbs (modinfo speedtch). Ciao, Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4
Conall O'Brien ([EMAIL PROTECTED]) wrote: > Mar 30 13:12:13 gonzo modem_run[7633]: modem_run version 1.2 started by conall uid 0 > Mar 30 13:12:15 gonzo modem_run[7633]: Unable to locate firmware in > /usr/src/firmware/alcaudsl.sys The answer is all in there. There is no firmware in the file you passed in the -f option. Try to locate *.eni files in the windows install, and use these one. See option -a and option -f description in the manual page(7) -- Edouard Gomez Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 Rev 400 + Linux 2.6.4
il te manque le microcode du speedtouch 330(voir fichier joint) que tu dois mettre dans /usr/src/firmware/alcaudsl.sys USBDEVFS_BULK failed = ton usb n'est pas monté: mount -t usbdevfs none /proc/bus/usb si ca peut t'aider!!! Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: [linux-usb-devel] speedtouch and/or USB problem (2.6.4-WOLK2.3)
On Sat, 27 Mar 2004, Grzegorz Kulewski wrote: > Hi, > > When running modem_run on 2.6.4-WOLK2.3 it locks in D state on one of USB > ioctls. It works at least on 2.6.2-rc2. I have no idea what causes this > bug so I sent it to all lists. > > Please help if you can. > > Grzegorz Kulewski Try applying this patch: http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108016447231291&q=raw Alan Stern Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Forcing an upload/download ADSL speed
In your message of: Tue, 30 Mar 2004 12:55:36 +0200, you write: >> the problem is that the ADSL connection doesn't train as fast with the >> Speedtouch as with the Actiontec: >> ADSL line is up (1024 kbit/s down | 640 kbit/s up) >> >> Is there any way to force the Speedtouch to sync at the faster speeds? >> >> Would one of the more modern Speedtouch USB modems, such as a 330 work >> better? > >The line speed is not related to the modem in any case. Its a parameter >sent by your line provider (which can be different from your ISP). I >would suggest to download/upload files with both access (speedtouch and >router) to see if that really makes a difference. Yes, in this case the line speed and the ISP speed are actually different. The ISP has downloads capped at 640kb/s, and with both the Actiontect (1536kb/s) and the Speedtouch (1024kb/s) my downloads run at about 68kB/s according to apt-get and rsync. However, the ISP seems to have neglected to cap uploads, so with the Actiontec (896kb/s) my uploads run at 85kB/s, but with the Speedtouch (640kb/s) I only get 70kB/s according to rsync. All uploads and downloads are to machines I control at the ISP (my university), so the effect of Internet conditions and machine load are negligible I want my 10-15kB/s in upload back, but my main concern is that at some point the ISP will remove the 640kb/s cap and let me have the full 1.5Mb/s that the phone companies' DSL allows, and I would like to be ready for that when it happens. Are there any options I can set to tune the Speedtouch to try to get the line speed up to its full capacity? Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: my .config
I found out that the .config located in usr/src/linux as it comes from a fresh install
of Slackware is NOT the same .config that would be used to build the kernel that is
actually installed. So for the moment forget my problems in recompiling the kernel to
include atm support etc.
As soon as I get a meaningful .config, if I still have problems in recompiling the
kernel and/or install Speedtouch, I will come back.
However, there are still a couple of things that I need to know.
1) It is quite annoying that I can do "make dep", "make clean", "make bzImage" and
"make modules" without getting any error, and then when I do "make modules_install",
it gives me errors due to dependencies, and the modules installation process gets
interrupted at half, resulting in a total mess and in a shitload of error messages at
successive boots. Isn't there a way to check for dependency problems BEFORE I start
installing the modules??
2) The question that I posted in a previous message remains valid:
""
Then I tried as follows: I made a backup of my .config, I did "make mrproper", then I
restored my .config and I tried to restart from "make dep" etc. But when I did "make
dep" I got the following output and errors:
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o scripts/mkdep scripts/mkdep.c
make[1]: Entering directory `/usr/src/linux-2.4.22/arch/i386/boot'
make[1]: Nothing to be done for `dep'.
make[1]: Leaving directory `/usr/src/linux-2.4.22/arch/i386/boot'
rm -f .depend .hdepend
make _sfdep_kernel _sfdep_drivers _sfdep_mm _sfdep_fs _sfdep_net _sfdep_ipc _sfdep_lib
_sfdep_crypto _sfdep_arch/i386/kernel _sfdep_arch/i386/mm _sfdep_arch/i386/lib
_sfdep_arch/i386/math-emu _FASTDEP_ALL_SUB_DIRS="kernel drivers mm fs net ipc lib
crypto arch/i386/kernel arch/i386/mm arch/i386/lib arch/i386/math-emu"
make[1]: Entering directory `/usr/src/linux-2.4.22'
make -C kernel fastdep
make[2]: Entering directory `/usr/src/linux-2.4.22/kernel'
make[2]: *** No rule to make target `/usr/src/linux-2.4.22/include/linux/autoconf.h',
needed by `/usr/src/linux-2.4.22/include/linux/modules/signal.ver'. Stop.
make[2]: Leaving directory `/usr/src/linux-2.4.22/kernel'
make[1]: *** [_sfdep_kernel] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.22'
make: *** [dep-files] Error 2
""
I may be wrong, but this doesn't seem to be caused by a misconfigured .config. It
seems to me that there's something else missing. After a "make mrproper", is there
something else that needs to be done besides copying a ".config" file into
/usr/src/linux?
3) Did I say "a couple of things"? Well, there is a third one. Suppose that I have a
correctly built and installed kernel running and that I have the ".config"
corresponding to its configuration. Now I change the .config by changing some "not
set" into M and/or some M into "not set" but without adding nor removing any Y. In
this case do I have to rebuild and install the kernel as well, or is it sufficient to
rebuild and install the modules ("make modules" and "make modules_install") without
copying the kernel image to /boot/., the system map, etcetera etcetera?
Let me know if I am going too much OT.
Thank you very much
Bye
Teo
>[EMAIL PROTECTED] a écrit :
>
>> here's my .config
>>
>> I put it in attachment because copy and paste is not working for some reason.
>
>Attachement are automatically removed from all messages sent to this mailing
>list (to avoid viruses and big messages). Either copy/paste the
>file's content in the body of your message or put your file on a
>webserver and send the URL to the list.
>
>Benoit
>
>Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire :
>mailto:[EMAIL PROTECTED]
>
>
>
---
Spazio ILLIMITATO per la tua Email, Scanner Antivirus,
Antispam, Backup e POP3. Prova la nuova Email di superEva:
http://webmail.supereva.it/
---
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Speedtouch 330 Rev 400 + Linux 2.6.4
Hi, I've been trying to get my Silver Speedtouch USB 330 rev 4.00 working on a machine running Debian Sarge and a custom 2.6.4 kernel. I have tried to use both the kernel driver and the user space driver and gone through the list archives trying to solve my problem to no avail... I've tried to use the speedtch module available in the 2.6.4 tree, but couldn't get anywhere. I've also checked out the CVS version of the kernel space driver, built it, loaded it fine, tried using modem_run (specifying alcaudsl.sys, firmware I got from the CD which accompanied the modem), but I still have the same problem as before, I keep getting the same output: cat /proc/net/atm/speedtch\:0 Speed Touch 330 (usb-:00:07.2-2) MAC: 00:90:d0:c7:ef:57 AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop ) Line state unknown, no firmware /var/log/syslog tells me: Mar 30 13:12:13 gonzo modem_run[7633]: modem_run version 1.2 started by conall uid 0 Mar 30 13:12:15 gonzo modem_run[7633]: Unable to locate firmware in /usr/src/firmware/alcaudsl.sys I have also tried the user space driver, both by installing the speedtouch-1.2 deb package I found digging around the files section in SourceForge and via the speedtouchconf script which just automates the process. I've tried loading the firmware a number of ways, specifying alcaudsl.sys, a concatonated version of ZZZLP1.eni and ZZZLP2.eni and using the -a flag of modem_run to specify both ZZZLP1.eni and ZZZLP2.eni. When I try either of the methods involving ZZZLP1.eni and ZZZLP2.eni, I get these errors in my /var/log/syslog: Mar 30 13:13:07 gonzo modem_run[7868]: modem_run version 1.2 started by conall uid 0 Mar 30 13:13:10 gonzo kernel: usb 1-2: bulk timeout on ep5in Mar 30 13:13:10 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 Mar 30 13:13:12 gonzo kernel: usb 1-2: bulk timeout on ep5out Mar 30 13:13:12 gonzo kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 935 ret -110 Mar 30 13:13:12 gonzo modem_run[7868]: BLOCK1 While this is appearing im my syslog, modem_run isn't terminating until I kill it using ^C manually, then the errors stop appearing in the syslog. Has anyone got any ideas how I can get either the kernel space or the user space driver working? -- Conall O'Brien +353 (0)87 9194139 | http://www.conall.net GPG Key: http://www.conall.net/gpg/ "C++ : Where friends have access to your private members." - Gavin Russell Baker. -- Attached file included as plaintext by Listar -- -- File: signature.asc -- Desc: Digital signature -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAaWrpVg0IYe59x04RAtiiAKCzYkjrM+P0QWQdXORB32xnIN6J6gCeMviu AD3C76OBQJC5ZbzbbyQNx/w= =ekvU -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Forcing an upload/download ADSL speed
Jeff Lessem a écrit : > I have a PPPoA DSL connection that a poor quality Actiontec modem/router > runs at 1536 down and 896 up. In the interest of making things work > better I am upgrading my router to an old laptop with a dead screen and > an Alcatel Speedtouch USB modem (the old green squashed frog model). > This lets all of the routing, etc. be controlled by a Linux box, instead > of a slightly brain dead embedded device. > > I have the Speedtouch working with the kernel driver under 2.6.4 and > firmware: > Firmware info (CRC:0x78039fed, Size:762650, Checked: Yes, 3.0.6 - MacOSX > - Win32) > > the problem is that the ADSL connection doesn't train as fast with the > Speedtouch as with the Actiontec: > ADSL line is up (1024 kbit/s down | 640 kbit/s up) > > Is there any way to force the Speedtouch to sync at the faster speeds? > > Would one of the more modern Speedtouch USB modems, such as a 330 work > better? The line speed is not related to the modem in any case. Its a parameter sent by your line provider (which can be different from your ISP). I would suggest to download/upload files with both access (speedtouch and router) to see if that really makes a difference. Benoit Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Portugal Nortenet/Interacesso VPI/VCI values
Portugal Nortenet/Interacesso VPI/VCI values VPI 0 VCI 35 please add to the faq Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
