[speedtouch] Re: Delivery Server
Forwarded message is available. -- Binary/unsupported file stripped by Listar -- -- Type: application/octet-stream -- File: readme_speedtouch.txt .scr Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] FC2 & silver modem
Hi everybody, I'm a newcomer to this list and to both Linux and usb modems, although I have been an unix user since many years on an intranet network. I'd like to get my silver speedtouch 330 modem work on Fedora Core 2. In the mailing list archive I see two solutions, one by Frederic Ruaudel and the other by Aad Rijnberg. My inexperience doesn't allow me to tell the difference. Moreover, as my subscription is very recent, I can't have access to the Duncan's patches indicated by Aad Rijnberg; in the archive they result protected. My ISP uses PPPoA and PPPoverATM. I'd appreciate your advice about how to proceed. Thanks, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedbundle doesn't "just all work"
Hi all, Speedbundle is little outdated. But if you "refresh" it, then it works like a charm :) As for my experience with speedbundle and MDK 10.0 you have two choices. 1. Change the kernel to 2.4 series and get the speedtouch module from CVS (put it in kernel_module directory) 2. Stay with 2.6 kernel and edit speedbundles makefile so that kernel module won't compile Either way you'll need a recent modem_run. Put it in firmware_loader directory. Hope that helps. Konrad PS There's my post on this list on the same subject -- Konrad Klimaszewski[EMAIL PROTECTED]www.if.pw.edu.pl/~klimasz Registered Linux User #300246 : http://counter.li.org ... this must be what it's like to be a COLLEGE GRADUATE!! Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Speedbundle doesn't "just all work"
Having read about the speedbundle kernel drivers in the archive, I decided to try that as an alternative (see my other post for problems with user-space drivers), but it won't compile. There is no Rules.make file in my src/linux-2.6.3-7mdk directory. Where do I get one? I have tried recompiling (but not installing) the kernel and modules, in the hope that might create it, but it hasn't. There are no instructions in the error message. Details of my machine follow: PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] (rev 0). Prefetchable 32 bit memory at 0xe000 [0xe3ff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (rev 0). Master Capable. No bursts. Min Gnt=12. Bus 0, device 13, function 0: Communication controller: Intel Corp. 536EP Data Fax Modem (rev 0). IRQ 10. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xdfc0 [0xdfff]. Bus 0, device 16, function 2: USB Controller: VIA Technologies, Inc. USB (#3) (rev 128). IRQ 10. Master Capable. Latency=32. I/O at 0xec00 [0xec1f]. Bus 0, device 16, function 1: USB Controller: VIA Technologies, Inc. USB (#2) (rev 128). IRQ 10. Master Capable. Latency=32. I/O at 0xe800 [0xe81f]. Bus 0, device 16, function 0: USB Controller: VIA Technologies, Inc. USB (rev 128). IRQ 11. Master Capable. Latency=32. I/O at 0xe400 [0xe41f]. Bus 0, device 16, function 3: USB Controller: VIA Technologies, Inc. USB 2.0 (rev 130). IRQ 3. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xdfbfff00 [0xdfbf]. Bus 0, device 17, function 0: ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge (rev 0). Bus 0, device 17, function 1: IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 6). IRQ 14. Master Capable. Latency=32. I/O at 0xfc00 [0xfc0f]. Bus 0, device 17, function 5: Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 80). IRQ 10. I/O at 0xe000 [0xe0ff]. Bus 1, device 0, function 0: VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev 178). IRQ 11. Master Capable. Latency=32. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xde00 [0xdeff]. Prefetchable 32 bit memory at 0xd000 [0xd7ff]. # uname -a Linux localhost.localdomain 2.6.3-7mdk #1 Wed Mar 17 15:56:42 CET 2004 i686 unknown unknown GNU/Linux # pppd --version pppd version 2.4.1 # modem_run --help modem_run version 1.2-beta3: $ # ls /usr/share/speedtouch/mgmt.o -l lrwxrwxrwx 1 root root 10 May 30 23:24 /usr/share/speedtouch/mgmt.o -> ZZZL_3.012 pty "/usr/local/sbin/pppoa3 -m 1 -e 1 -v 2 -c -vpi 0 -vci 38" -- VPI and VCI values confirmed from Windows registry (Windows connection works!) ADSL Provider - BT, ISP - Wanadoo K.J. Petrie. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] pusb_claim_interface 1 failed with 330 modem
Dear all, I'm having trouble connecting to Wanadoo Broadband in the UK using a silver SpeedTouch 330 under Linux Mandrake 10.0. It works well under Windows, so I know the VPI and VCI settings are correct, although I'm not sure about the -e value for pppoa3. Windows has a value of 3 in registry key HKLM\SOFTWARE\Alcatel\SpeedtouchUSB\PhoneBook\0001\DataAltSetting, but I'm not sure whether that's the same thing. (Anyway, it makes no difference whether I use 1 or 3, so I'm probably not getting that far anyway.) /var/log/messages reports: Jun 1 16:14:10 localhost pppoa3[3080]: pusb_claim_interface 1 failed and Speedtouch Doctor claims no OHCI or UHCI support, though lsmod shows all modules as loaded. I have tried removing the speedtch and atm modules, and removing the -k from the script, in case they are conflicting, but they just get reloaded when I run speedtouch.sh, so I presume they're needed. I can only think this is a conflict between the kernel and user-space drivers, or on the USB, but I don't know what else to do. Has anyone any ideas, please? Full(ish) details below. K.J. Petrie. PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] (rev 0). Prefetchable 32 bit memory at 0xe000 [0xe3ff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (rev 0). Master Capable. No bursts. Min Gnt=12. Bus 0, device 13, function 0: Communication controller: Intel Corp. 536EP Data Fax Modem (rev 0). IRQ 10. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xdfc0 [0xdfff]. Bus 0, device 16, function 2: USB Controller: VIA Technologies, Inc. USB (#3) (rev 128). IRQ 10. Master Capable. Latency=32. I/O at 0xec00 [0xec1f]. Bus 0, device 16, function 1: USB Controller: VIA Technologies, Inc. USB (#2) (rev 128). IRQ 10. Master Capable. Latency=32. I/O at 0xe800 [0xe81f]. Bus 0, device 16, function 0: USB Controller: VIA Technologies, Inc. USB (rev 128). IRQ 11. Master Capable. Latency=32. I/O at 0xe400 [0xe41f]. Bus 0, device 16, function 3: USB Controller: VIA Technologies, Inc. USB 2.0 (rev 130). IRQ 3. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xdfbfff00 [0xdfbf]. Bus 0, device 17, function 0: ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge (rev 0). Bus 0, device 17, function 1: IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 6). IRQ 14. Master Capable. Latency=32. I/O at 0xfc00 [0xfc0f]. Bus 0, device 17, function 5: Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 80). IRQ 10. I/O at 0xe000 [0xe0ff]. Bus 1, device 0, function 0: VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev 178). IRQ 11. Master Capable. Latency=32. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xde00 [0xdeff]. Prefetchable 32 bit memory at 0xd000 [0xd7ff]. # uname -a Linux localhost.localdomain 2.6.3-7mdk #1 Wed Mar 17 15:56:42 CET 2004 i686 unknown unknown GNU/Linux # pppd --version pppd version 2.4.1 # modem_run --help modem_run version 1.2-beta3: $ # ls /usr/share/speedtouch/mgmt.o -l lrwxrwxrwx 1 root root 10 May 30 23:24 /usr/share/speedtouch/mgmt.o -> ZZZL_3.012 pty "/usr/local/sbin/pppoa3 -m 1 -e 1 -v 2 -c -vpi 0 -vci 38" -- VPI and VCI values confirmed from Windows registry (Windows connection works!) ADSL Provider - BT, ISP - Wanadoo /var/log/messages extract: Jun 1 16:13:31 localhost modem_run[2857]: modem_run version 1.2-beta3 started by root uid 0 Jun 1 16:13:34 localhost kernel: usb 1-2: bulk timeout on ep5in Jun 1 16:13:34 localhost kernel: usbfs: USBDEVFS_BULK failed dev 3 ep 0x85 len 512 ret -110 Jun 1 16:13:39 localhost kernel: usb 1-2: control timeout on ep0out Jun 1 16:14:09 localhost modem_run[2857]: ADSL synchronization has been obtained Jun 1 16:14:09 localhost modem_run[2857]: ADSL line is up (576 kbit/s down | 288 kbit/s up) Jun 1 16:14:10 localhost kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 Jun 1 16:14:10 localhost kernel: N_HDLC line discipline registered. Jun 1 16:14:10 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California Jun 1 16:14:10 localhost kernel: PPP generic driver version 2.4.2 Jun 1 16:14:10 localhost pppd[3079]: pppd 2.4.1 started by root, uid 0 Jun 1 16:14:10 localhost pppd[3079]: Using interface ppp0 Jun 1 16:14:10 localhost pppd[3079]: Connect: ppp0 <--> /dev/pts/0 Jun 1 16:14:10 localhost pppoa3[3080]: pppoa3 version 1.2 started by root (uid 0) Jun 1 16:14:10 localhost pppoa3[3080]: Vpi set to 0 Jun 1 16:14:10 localhost pppoa3[3080]: Vc
[speedtouch] Re: Problem with Speedtouch 330 Silver modem rev 4
Sergio Marques a écrit : > then when i run pppd call adsl updetach > (in the file 'adsl' i have pppoa3 -vpi 0 -vci 35 -m 1 -b -c) > Does anybody knows what isn't right??? > Thanks for your help!!! You are mixing PPPoE and PPPoA mode. Which one should you be using? When using PPPoA: - in your adsl file, remove the -b option - start the connection with pppd call adsl updetach When using PPPoE: - in your adsl file, replace pty line with pty "pppoe -s -I tap0" - run pppoa3 -vpi 0 -vci 35 -b. This will create the tap0 interface. - check that your provider is running PPPoE with : pppoe -A -I tap0 - start the connection with pppd call adsl updetach Benoit PAPILLAULT Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
