[speedtouch] Re: i get the provider's "configure your setting" page

[Duncan Sands]

Hi, the fact you see a web-page supplied by your ISP shows
that the modem is working: network packets are getting from
your ISP to you.  I don't know why your ISP thinks things
are not configured right (you can always ask them to tell
you what's wrong), but my guess is that you authenticated
wrong, i.e. used the wrong username or password.  These
are stored in /etc/ppp/pap-secrets or /etc/ppp/chap-secrets.

> i don't know how to do the "debug" thing.

How do you run pppd?  Use the same command but add debug
to the list of command line options.  Debug output either
goes to the terminal or to your system logs (/var/log/messages
or /var/log/syslog usually).

Ciao,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] I get the provider's "configure your setting" page

[M Kotb]

I install the driver for the ST330 rev.4 on mandriva 2007.0 powerpack default 
packages.
everything installed ok except the part where firewall configuration will be 
replaced

"Use these commands to make a backup of your existing firewall bootscript and 
then replace it. 
su -c 'mv /etc/rc.d/init.d/shorewall{,.old}" 
==> /etc/rc.d/init.d/shorewall to be backup doesn't exist 

but
it worked fine, it dialed and i got internet access, i had allot ports
visible so i changed the firewall to be stealth, it kept working.

but after i rebooted the modem dialed ok but i get  the provide web page 
telling me to configure the settings correctly at every page i open
(this happened with windows XP i uninstalled the modem driver and reboot and 
installed it again, that fix it)

i don't know how to uninstall the linux driver

so, i uninstalled the 
liblinux-atm
, ppp-pppoatm , ppp-pppoe and  ppp packages and delete the files copied
at modem installation and undo my firewall changes , rebooted installed
every thing back

it dial but i still get the "configure your setting" page (same problem)

so, i guess the firmware loads correctly, i don't get any ppp errors.
i don't know how to do the "debug" thing.

sorry if i over described my problem.

I'd appreciate any ideas.

thank you.


  

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]