[speedtouch] Fwd: [Speedtouch 330 rev4] Please Martin can you help me a little?
Dear Jérôme, I haven't tested it, but I'm confident it's ok. http://www.nemohackers.org/speedtouch_mandrake.php Regards, Martin Galpin -- Forwarded Message -- Subject: [Speedtouch 330 rev4] Please Martin can you help me a little? Date: Wednesday 14 April 2004 19:25 From: Jérôme Staal [EMAIL PROTECTED] To: martin [EMAIL PROTECTED] Dear Martin, I hope you won't flame me to ask some help on this mighty/f...king ADSL modem -_^ I am an average new user of Linux, I choose a Mandrake 9.2 distribution, whose kernel version (adapted by Mandrake) is 2.4.22-based. My ADSL modem is the Speedtouch 330 (silver color; rev4 verified w/ usbview utility) from Alcatel/Thomson. I installed again a fresh new distribution, and I took the time to configure the modem at post-install step: I didn't choose the PPPoE protocole because I guess it is a PPPoA one. As there was no explicit choice for it, I choose the most explicit option, named Speedtouch ADSL modem (or something near this). I also configured my 10/100 Ethernet card, even if I do not use it. A eth0 interface was created at this purpose. Once the installation finished, I log in, run DrakConfig and get a view of the physical devices section (material). I see my modem in the list but when I select it and then display in the right panel the related information, I see that the module slot says unknown... while I strictly did the install of GPL 'user-side' drivers of B.Papillaud as described in the How-To. -- Does it means there are still no drivers for the modem As my kernel is 2.4.22-based, I did *not* patch the HDLC and I did *not* compile any new configured kernel. I checked the USB interface: usb-uhci (in graphic detailed load mode, Mandrake show me its initialization) pppd version is 2.4.1 I downloaded the new firmware (is it the same thing as 'microcode' ??) named ZZZLP2.eni (I also found it on my Windows partition) and put it with the compiled and installed binaries (modem_run, pppoa3, pppoa2) i.e. /usr/(local/)sbin/ directory. Finally I edited the 5 configuration files, and runned the modprobe and other instructions at the command-line. The mount -t usbdevfs (...) line got me a message explaining the mount was already done. Good. During the whole thing the modem was plugged in, the two LEDs were immediately and constantly *green*. I go to the directory containing the firmware ZZ*.eni and launch: modem_run -m -f ZZLP2.eni, the console spend a little less then a minute to hang on and get me the invite back. LED have still not changed. I finish w/ pppd call adsl and... LEDs still don't change. ifconfig give me a report for interfaces: -lo, -eth0 and something POINT-TO-POINT ifconfig ppp0 tell me that the modem was not found where info was searched on the interface... How can I get some help to understand what I did wrong or, better, how can I produce the info that will allow me to get helped? I cannot say it in another manner: I am completely lost with this modem. I read a lot of tutorials, read Usenet and Web boards, subscribed to mailing-lists but nothing/nobody seems to be able to tell me: look: you did this, and this produced this error. I am ready to check anything necessary to get this damned modem working and to be able to clearly explain and understand my problems. A big big thank to you if you take the time to read and answer :) Jerome Staal (Sorry for the bad english writing, I am French and not a great writer :/ ) --- -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -- Binary/unsupported file stripped by Listar -- -- Type: image/gif -- File: Rabbit.GIF Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Modem connection gradually gets slower.
On Sunday 04 April 2004 16:12, Leonard den Ottolander wrote: Hello Sergio, then gradually I have been getting problems with Firefox and Thunderbird not being able to type into the location bar without freezing the browser. Care to explain how that could be related to the speedtouch driver? Leonard. I took it as his connection was slowing, but now you mention it... Martin -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: [RFC] 330 rev4 support
On Sunday 15 February 2004 12:50 am, Edouard Gomez wrote: On my side, i've already completed the new firmware extraction code/API. For legal reasons i'm going to remove the proprietary data1 source. I'm also going to provide the free version in a standalone file that will install in ${datadir}/speedtouch/boot.v123.bin (sources included for the curious people). Out of interest, how was the free version created? -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Ok i threw the main ideas, now i must find the time to code it correctly. Cry and shout loud on this ML if i did nothing until the end of the week. Sounds good to me. Don't think that was a dig, I totally understand if you don't have so much time -- I experience that too :-). Out of interest, do Thomson notify you of the changes, or do they rely on the community to reverse engineer it? I get the impression that for a product which sports a Supported in GNU/Linux they don't do much to help it. I must say I dream of a day when we have completely non-proprietary firmware... Regards, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAKAut3bF34WXq1XsRAmS0AKCnr3CapF00Bkru8ZmTf4zU9lv2zwCffxRa bbMBzBHizgwXGTyuezRzk3A= =U5PR -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tuesday 10 February 2004 11:08 pm, Leonard den Ottolander wrote: Hello Martin, Sort of. I think the original source doesn't use all the spaces but tabs instead. Could you be so kind to upload a cleanly patching diff instead of a hand crafted version? diff -u modem_run.c.000 modem_run.c I think in general it is good for maintenance if indention is preserved carefully. Tell your editor to use 8 space tabs instead of 8 spaces. If you are using the midnight commander disable the fake half tabs. Got the tarball. The problem appears to be some spaces at the end of some lines that are not taken into account in your hand patch. (Maybe only in my version of the source and already fixed in CVS. If the original diff patches cleanly for you please let me know.) Please do a diff the next time, as it avoids these kind of nasty problems. Also the second block uses spaces instead of tabs, 8 or 9 spaces alternatingly. I am fixing that as well. A clean patch will be available within 24 hours from http://www.ottolander.nl/opensource/speedtouch/modem_run.c.diff . Bye, Leonard. I've uploaded a fresh diff now. I apoligise for this, the patch I had uploaded was what I had been sent, I didn't recreate it. Hopefully it's alright now. Regards, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAKW9L3bF34WXq1XsRAv1QAKD2XVvYOSDfZO0/0mtNaMULCt6cfQCgmFRn 2j+aEZECZUjIGwhJu8QVN6A= =1Wt2 -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 11 February 2004 12:18 am, Leonard den Ottolander wrote: Hi Martin, Also the second block uses spaces instead of tabs, 8 or 9 spaces alternatingly. I am fixing that as well. A clean patch will be available within 24 hours from http://www.ottolander.nl/opensource/speedtouch/modem_run.c.diff . My version is available. Created by diffing the tarball against the old tarball and cleaning up the spacing. I've uploaded a fresh diff now. I apoligise for this, the patch I had uploaded was what I had been sent, I didn't recreate it. Sent by whom? Who is the creator of that patch? Does that patch patch cleanly for you (patch -p 0 modem_run.diff)? Maybe the offending spaces have been deleted from CVS, in which case I am mistaken. The patch is perfectly clean for me. Either way, to finish this now, I'll upload your patch. I am the author of the patch, though what was originally uploaded was sent to me by Remigio Di Muzio (without him realising I was the author). http://www.nemohackers.org/speedtouch/modem_run.diff is now your diff. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAKXcR3bF34WXq1XsRAtzmAKDc7MwxbNb2vCmoSyFzQ3MbJIQUMQCgyWJW /ppB2CJ0aHxrM7pkRnmlBBw= =9jKF -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: problem with driver - see config.log
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The problem is nothing to do with the drivers. As config.log reports, you're missing `as', which is the GNU assembler. Reinstall/compile GCC and it's dependencies. Regards, Martin -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAJ8/P3bF34WXq1XsRArdXAKC5Xw6dciwZ95X24eEwYyAhnzHfZgCgoid8 rttLpF6RJsgB6oTxg8rLDzA= =hdv9 -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 09 February 2004 09:59 pm, Leonard den Ottolander wrote: Hello Martin, I finally got my own patch to work today! So, I'm free once again. http://www.nemohackers.org/speedtouch.php If I apply this patch to modem_run will it still work with the original 330? If so did you add it to CVS? If not, how do you expect to merge it? An extra command line switch? Bye, Leonard. No, it wont work with any 330 before the Rev 0400, which is what I explicitly stated on the page, and one of the reasons why it _isn't_ committed to CVS. A command line switch would be possible, though the thread help needed with testing auto-detect Rev patch is working on automatic detection -- the better option. If this happens, the ARM bytes from the patch on the site above can be merged with theirs, and finally merged with CVS. Regards, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAKAQz3bF34WXq1XsRAqagAKDs+CE/tc/GpXD0VKlTbAC2yao4HQCg6t40 43Q46dNX1z/PMBbIhOeLaUY= =Qfnh -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Ok i threw the main ideas, now i must find the time to code it correctly. Cry and shout loud on this ML if i did nothing until the end of the week. Sounds good to me. Don't think that was a dig, I totally understand if you don't have so much time -- I experience that too :-). Out of interest, do Thomson notify you of the changes, or do they rely on the community to reverse engineer it? I get the impression that for a product which sports a Supported in GNU/Linux they don't do much to help it. I must say I dream of a day when we have completely non-proprietary firmware... Regards, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAKAwQ3bF34WXq1XsRAoq4AKC87sr4GmhLG7lAcnKqcmBGDNx0TwCfcKX2 sievJfgLkYYAZH21mkP54Vk= =HoYD -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 08 February 2004 03:37 pm, Leonard den Ottolander wrote: Hello Martin, I finally got my own patch to work today! So, I'm free once again. Great! Thanks for putting in your effort. http://www.nemohackers.org/speedtouch.php The patch available there seems to be mangled. Bye, Leonard. So it does. I apoligise for that, I think gFTP messed up alittle. It's fixed now. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAJltA3bF34WXq1XsRAin5AKC8wQWmoK1mMHdRwjRtZU2roYvIGACgyg1j XmVj9z4Ds7yD8sv1qpbg94w= =HUMb -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: help needed with testing auto-detect Rev patch
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 08 February 2004 09:48 am, John Hysted wrote: I have produced a patch for modem_run which should auto-detect the modem revision and execute the appropriate code for Rev , 0200 and 0400 modems, but as I only have a green frog I am unable to test this. For me, the patch fixes the Error reading usb urb under heavy load on version 1.2 problem by reverting to alternate endpoint 2 when a Rev modem is detected. As the patch file is 16kb, I have not attached it, but it is available as john5_patch.patch from http://www.hystedjp.pwp.blueyonder.co.uk/ . Could you please post the Rev of your modem (P: Vendor=06b9 ProdID=4061 Rev= 0.00 from /proc/bus/usb/devices ) and the result of running modem_run with the option -v 1 set. I am interested in the line that says 08:43:40 modem_run[46] Rev detected, revision 0 chosen. Thanks Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] I'll try it just as soon as this large download finishes; about 8 hours from now. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAJlvE3bF34WXq1XsRAtmcAJ9hW4D50TMtytWucn2LBWauGkTb+QCeMZA0 EiJlKWih7awc7tsQA8sAEzU= =9tpS -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 08 February 2004 04:24 pm, Leonard den Ottolander wrote: Hello Martin, http://www.nemohackers.org/speedtouch.php The patch available there seems to be mangled. So it does. I apoligise for that, I think gFTP messed up alittle. It's fixed now. http://www.nemohackers.org/speedtouch/ : modem_run.diff 08-Feb-2004 10:4219k still appears mangled. Sorry :( . It's fixed now! Sorry for that. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAJmhV3bF34WXq1XsRAuM8AKD1n+OJPlDTIiS96KBlcWEb39p77gCfV0Bv JYy/f7zFUCmGt2iBDv7L0KE= =91Rq -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] 330/Rev 400 success
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I finally got my own patch to work today! So, I'm free once again. I'd like to thank you all. Until a real fix is made, I wrote a short page for new users on how to get the Rev 400 modem to work. http://www.nemohackers.org/speedtouch.php (if I forgot anyone, tell me, I'll add them) Perhaps this should be posted somewhere until then? Regards, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAJPe/3bF34WXq1XsRAiBrAJ9vmnLTbU2/IX7LEgZmYWTGk/0xiwCfZXdn ts1OdN1EhiSnEDpqwfYZvBQ= =Hhpd -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: 330/Rev 400 (silver modem) - Got it working!
This didn't do it for me. Could you maybe run a diff against your source, or archive yours? Could you also confirm to me you're using the ZZZLP2.eni firmware? Martin On Wednesday 28 January 2004 11:39 am, Remigio Di Muzio wrote: I've got a Speetouch 330/Rev 400 (silver modem) too and I've been successful in running it, just following the instructions by Lewis Jardine (thanks very much to him). I had the same trouble with modem synchronization as Edward and Danilo had, I applied the workaround suggested by Danilo and now everything runs (thanks very much to Danilo too)! However, I think that the right instruction to add to modem_run.c is this one: timed_out=0; /// - Add this istruction and not the one suggested by Danilo timed_out=1; /// - Add this istruction since the next line checks the value of the timed_out variable and if it's not zero it prints an error messages, otherwise prints the ADSL line state, as you can see in the following two lines extracted from my /var/log/messages: Jan 28 11:33:07 maka modem_run[1651]: ADSL synchronization has been obtained Jan 28 11:33:07 maka modem_run[1651]: ADSL line is up (800 kbit/s down | 160 kbit/s up) The program runs in any case, but I think it's better to log correct informations into the messages file. Remigio Di Muzio On Tuesday 27 January 2004 21:55, Danilo Berardi wrote: Edward Ponting wrote: I'm sure that the link is connected correctly. Is it worth me extending the timeout to 60 seconds?? The problem is not alignement but child modem_run process. It do not send a signal to his parent that modem is now sincronized. A workaround, before developers patch, can be set timed_out = true after reset alarm and before check into modem_run.c. Modem work fine so ... /* Begin extract modem_run.c */ alarm(0); timed_out=1; /// - Add this istruction if (timed_out) { /* End extract modem_run.c */ In my system (but i use pppoa) 30 seconds enought for all. Thanks Lewis, Danilo Berardi Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: News about the Silver modems
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 30 January 2004 12:08 am, Edouard Gomez wrote: Hi, It's now a few weeks a new model of the speedtouch usb is shiped. However as some of few have noticed, the current drivers are simply not adapted to this new series of modem. But good news for you all. Thomson sent a few samples of this new modem to me, duncan benoit and francois. Thomson also did forward us 2 patches to make the modem work. But in its current form, it breaks old modem support. But it's very probable we will have something working very soon. Until then, I just ask you to be patient because as you may know, we do this on our spare time. And don't forget the work done by smarts users who have already find a solution replacing the downloading code and a few other things, use this as a temporary solution. This is great news, and I thank you for your work. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAGaP63bF34WXq1XsRAg1JAJ48j8WGIVE28LTW76snAWWzwjkcCQCeIFSz X3d5jUePPUmWMf8MBNFEYgw= =pU3F -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: silver modem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 23 January 2004 08:14 am, [EMAIL PROTECTED] wrote: Hi, I have just got a silver modem and I'm unable to get it working with Gentoo. I have read on this list there seems to be issues with the firmware uploading (and I'd agree with this happening on mine also). I just wonder whether it is worth me keeping this modem, or getting a different type? Perhaps there is a fix for it already? Thanks. AJ. As of yet, I haven't had the time to work on a fix, and I don't believe anybody else has either. I'm keeping my modem, I don't like to walk away from it. The choice is yours. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAENva3bF34WXq1XsRAq9qAKCGFfYclPqa0PDEYiSNW9OPt+/wwgCdFyDO UEiRH+XxQH7f83ba0rXf08A= =zuTu -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 V4.00
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Status update: Earlier I updated to ARM code in modem_run.c to that in the log for the new firmware, as well as updating what I thought were the start/end points in extract.c. The modem failed to initialise, so I imagine I got the end point wrong. I'll try again tomorrow. It left me with the normal error: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110 ... Just for completeness, the updated ARM code is as follows: snip 0x88, 0xf8, 0x00, 0x00, 0x00, 0x00, 0xf2, 0x01, 0x0a, 0x00, 0x00, 0xea, 0x09, 0x00, 0x00, 0xea, 0x08, 0x00, 0x00, 0xea, 0x07, 0x00, 0x00, 0xea, 0x06, 0x00, 0x00, 0xea, 0x05, 0x00, 0x00, 0xea, 0x9c, 0x00, 0x00, 0xea, 0x03, 0x00, 0x00, 0xea, 0x18, 0x13, 0x9f, 0xe5, 0x00, 0x00, 0xa0, 0xe3, 0x00, 0x00, 0x81, 0xe5, 0xfb, 0xff, 0xff, 0xea, 0x01, 0x00, 0xa0, 0xe3, 0x08, 0x13, 0x9f, 0xe5, 0x00, 0x00, 0x81, 0xe5, 0xd1, 0x00, 0xa0, 0xe3, 0x00, 0xf0, 0x29, 0xe1, 0xfc, 0xd2, 0x9f, 0xe5, 0xd2, 0x00, 0xa0, 0xe3, 0x00, 0xf0, 0x29, 0xe1, 0xf4, 0xd2, 0x9f, 0xe5, 0xd3, 0x00, 0xa0, 0xe3, 0x00, 0xf0, 0x29, 0xe1, 0xec, 0xd2, 0x9f, 0xe5, 0x00, 0x00, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3, 0xe4, 0x12, 0x9f, 0xe5, 0x01, 0x22, 0xa0, 0xe3, 0x01, 0x00, 0xa0, 0xe3, 0x00, 0x00, 0x81, 0xe5, 0xd8, 0xa2, 0x9f, 0xe5, 0x15, 0x00, 0x00, 0xeb, 0x00, 0x00, 0x82, 0xe5, 0x7d, 0xaf, 0xa0, 0xe3, 0x12, 0x00, 0x00, 0xeb, 0x10, 0x00, 0x82, 0xe5, 0x08, 0x60, 0xa0, 0xe3, 0x20, 0x00, 0x82, 0xe5, 0x20, 0xa0, 0xa0, 0xe3, 0x0d, 0x00, 0x00, 0xeb, 0x01, 0x60, 0x56, 0xe2, 0xfa, 0xff, 0xff, 0x1a, 0xac, 0x52, 0x9f, 0xe5, 0x00, 0x00, 0x85, 0xe5, 0x00, 0x00, 0xa0, 0xe3, 0x00, 0x00, 0x81, 0xe5, 0x01, 0x02, 0xa0, 0xe3, 0x00, 0x10, 0xa0, 0xe3, 0x98, 0x22, 0x9f, 0xe5, 0x04, 0x30, 0xa0, 0xe3, 0x03, 0x10, 0x80, 0xe6, 0x02, 0x00, 0x50, 0xe1, 0xfc, 0xff, 0xff, 0x1a, 0x02, 0x00, 0x00, 0xea, 0x01, 0xa0, 0x5a, 0xe2, 0xfd, 0xff, 0xff, 0x1a, 0x0e, 0xf0, 0xa0, 0xe1, 0x00, 0x10, 0xa0, 0xe3, 0x01, 0x28, 0xa0, 0xe3, 0x7f, 0x2f, 0x82, 0xe2, 0x02, 0x16, 0x81, 0xe0, 0x12, 0x30, 0xa0, 0xe3, 0x03, 0x3b, 0x83, 0xe2, 0x00, 0x00, 0xa0, 0xe3, 0x00, 0x2a, 0x83, 0xe1, 0x04, 0x20, 0x81, 0xe4, 0x01, 0x00, 0x80, 0xe2, 0x01, 0x0c, 0x50, 0xe3, 0xfa, 0xff, 0xff, 0xba, 0x1e, 0x30, 0xa0, 0xe3, 0x03, 0x3b, 0x83, 0xe2, 0x00, 0x2a, 0x83, 0xe1, 0x04, 0x20, 0x81, 0xe4, 0x01, 0x00, 0x80, 0xe2, 0x01, 0x4c, 0xa0, 0xe3, 0x02, 0x40, 0x84, 0xe2, 0x04, 0x00, 0x50, 0xe1, 0xf8, 0xff, 0xff, 0xba, 0x12, 0x30, 0xa0, 0xe3, 0x03, 0x3b, 0x83, 0xe2, 0x00, 0x2a, 0x83, 0xe1, 0x04, 0x20, 0x81, 0xe4, 0x01, 0x00, 0x80, 0xe2, 0x01, 0x0a, 0x50, 0xe3, 0xfa, 0xff, 0xff, 0xba, 0x00, 0x10, 0xa0, 0xe3, 0x01, 0x28, 0xa0, 0xe3, 0x7f, 0x2f, 0x82, 0xe2, 0x02, 0x16, 0x81, 0xe0, 0x10, 0x1f, 0x02, 0xee, 0x03, 0x40, 0xa0, 0xe3, 0x10, 0x4f, 0x03, 0xee, 0x00, 0x50, 0xa0, 0xe3, 0x10, 0x5f, 0x05, 0xee, 0x17, 0x5f, 0x07, 0xee, 0x17, 0x5f, 0x08, 0xee, 0x3d, 0x00, 0xa0, 0xe3, 0x10, 0x0f, 0x01, 0xee, 0x01, 0x73, 0xa0, 0xe3, 0x04, 0x00, 0xa0, 0xe3, 0x05, 0x00, 0xc7, 0xe5, 0x01, 0x00, 0xa0, 0xe3, 0x06, 0x00, 0xc7, 0xe5, 0x01, 0x00, 0xa0, 0xe3, 0x07, 0x00, 0xc7, 0xe5, 0x03, 0x00, 0xa0, 0xe3, 0x08, 0x00, 0xc7, 0xe5, 0x00, 0x00, 0xa0, 0xe3, 0x09, 0x00, 0xc7, 0xe5, 0x80, 0x00, 0xa0, 0xe3, 0x01, 0x00, 0xc7, 0xe5, 0x53, 0x00, 0xa0, 0xe3, 0x00, 0xf0, 0x29, 0xe1, 0x98, 0x11, 0x9f, 0xe5, 0x00, 0x00, 0xe0, 0xe3, 0x00, 0x00, 0x81, 0xe5, 0x90, 0x11, 0x9f, 0xe5, 0x00, 0x00, 0xe0, 0xe3, 0x00, 0x00, 0x81, 0xe5, 0x88, 0x11, 0x9f, 0xe5, 0x03, 0x00, 0xa0, 0xe3, 0x00, 0x00, 0x81, 0xe5, 0x01, 0x09, 0xa0, 0xe3, 0x7c, 0x11, 0x9f, 0xe5, 0x00, 0x00, 0x40, 0x01, 0x12, 0x88, 0x9c, 0xf2, 0x01, 0x00, 0x00, 0x96, 0x01, 0x81, 0xe5, 0x80, 0x00, 0xa0, 0xe3, 0x40, 0x11, 0x9f, 0xe5, 0x00, 0x00, 0x81, 0xe5, 0x04, 0x00, 0x8f, 0xe2, 0x01, 0x00, 0x80, 0xe2, 0x10, 0xff, 0x2f, 0xe1, 0x59, 0x4f, 0xb8, 0x78, 0x40, 0x1e, 0xfc, 0xd1, 0x38, 0x78, 0xf9, 0x7a, 0x09, 0x02, 0xbc, 0x7a, 0x21, 0x43, 0x09, 0x02, 0x7c, 0x7a, 0x21, 0x43, 0x09, 0x02, 0x3c, 0x7a, 0x21, 0x43, 0x11, 0x38, 0x01, 0x28, 0x2d, 0xdb, 0x03, 0x28, 0x2b, 0xdc, 0x80, 0x00, 0x50, 0x4c, 0x24, 0x58, 0xa7, 0x46, 0x3c, 0x4b, 0x0e, 0x33, 0x7a, 0x7b, 0x12, 0x02, 0x3c, 0x7b, 0x22, 0x43, 0x12, 0xd0, 0x14, 0x1c, 0xf4, 0x3c, 0xff, 0x3c, 0x0e, 0xd5, 0x40, 0x07, 0x02, 0xd0, 0x1c, 0x1c, 0x0b, 0x1c, 0x21, 0x1c, 0x52, 0x1e, 0x8c, 0x5c, 0x9c, 0x54, 0xfb, 0xd1, 0x31, 0xa4, 0x14, 0x23, 0x23, 0x60, 0xc0, 0x0f, 0x64, 0x30, 0x00, 0xe0, 0x66, 0x20, 0x78, 0x70, 0xcb, 0xe7, 0x01, 0xa2, 0x10, 0x47, 0x00, 0x00, 0x01, 0xf0, 0xa0, 0xe1, 0x04, 0x20, 0x8f, 0xe2, 0x01, 0x20, 0x82, 0xe2, 0x12, 0xff, 0x2f, 0xe1, 0x60,
[speedtouch] Re: Speedtouch 330 V4.00
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Dear Duncan, Sorry highlighted the wrong bit of code should have been 0x0c. I am unsure how to do what you are suggesting. Any suggestions? Regards Mike Gar, I thought it was quiet - I hadn't got any email all day. It's all good now, it must have got jammed up somewhere. Right, I understand what he's asking. I'll take a look at extract.c later and see if I can change those hex values to find the start and end points. Perhaps soon we'll have to have a `./configure --with-rev4=yes` :). I'll let you know. !google usb-snoopy Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/8srT3bF34WXq1XsRAmuXAJ46SAz0gqFnU1U9WnNxIsikHUh0EwCfeN0d ll9pjMvH8XvedZTsWf6Fyuk= =KmUu -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 V4.00
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 31 December 2003 01:36 pm, you wrote: Dear Martin, I take it you have a windows machine so you can use usb-snoopy to get the log file? Otherwise I can send you mine. Regards Mike Dear Mike, Yeah, I've had to run the modem on a Win98 box and use ICS for the routing since I got mine. I think it's obvious Alactel aren't aware of this - probably a screw-up somewhere along the line as I did actually give their tech-support a ring yesterday. The dialog went something like: Dialog Me Hello, I have a few questions regarding the Rev. 4 modem on free operating systems such as GNU/Linux and *BSD and any possible changes to the firmware on the newer revisions of the 330 modem. /Me Tech.SupportErr, hangon one second, I'll just ask my superior./Tech.Support *put on hold - MUZAK!* Tech.SupportAh, yes, we don't know anything about that. Drivers are on our site, thanks for calling./Tech.Support /Dialog Praise those technicals heh? Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/8tVq3bF34WXq1XsRAo5vAKCSHvM9/DLmLtw9qGGSb19N2ETVWwCgy/8+ 8+nS1Bdc7jnysIydMEyAD+0= =JyUO -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch 330 V4.00
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 31 December 2003 01:36 pm, you wrote: Dear Martin, I take it you have a windows machine so you can use usb-snoopy to get the log file? Otherwise I can send you mine. Regards Mike Change of plan, ICS causes the resources on my laptop to be unusuable. Could you upload the log file, or send it to me please? Regards, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/8uEu3bF34WXq1XsRAj6mAKDA1nNKu/HM4jEUZ5fEYLqFX4h5GACg9YY8 6gUuOP84IWj7MY8n3ABsK+M= =sQUy -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: firmware loader problem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 i downloaded version 1.2-beta3 and it worked! But this wasn't with a Rev 4.00 was it? - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/8IKD3bF34WXq1XsRAhAtAJ9dRf0kdKvex93jZIK8M7d1GgJM5ACg/ZnD 5NfQ2kLKJtJhH8OIeZWAFQ0= =FqO8 -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Silver SpeedTouch 330 Modem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Saturday 27 December 2003 09:48 am, you wrote: Things getting more obscure by the day. I already mentioned getting two firmware-files named 'ZZZLP2.eni', probably for the version 4 type of modem. The funny thing is, that they TOO are of different sizes (I did not expect it, so I didn't check yesterday); one of them is 775509 bytes and the other 774192. Are there any more tastes of these too? Ok Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] 775509 Dec 24 18:45 ZZZLP2.eni 354ead15a7323fca88f8fbfad33caf68 ZZZLP2.eni Do you want me to send it again? ;) - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/7W3t3bF34WXq1XsRAvGWAKC+yCTEl2FPtfWFnLQ81A2jkFqtFgCfU6iX Yll2yR+HLtfsoqq3kTbW/BA= =1Zln -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Silver SpeedTouch 330 Modem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 26 December 2003 12:28 pm, you wrote: Hello, I have seen in the mailing list other people are having problems with the Silver 330 Rev 4.0 modem. I am having the same problem that the firmware will not upload! I have finally come to the conclusion it is a hardware revision problem. Has anyone a solution? Thanks in anticipation. Mike Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Ah, another troublesome user, like myself. The answer is, as of yet, no solution but some ideas to the problem. Stick around because the answer will come about. I'm planning on taking a look at the ZZxx2.eni firmware for the REV400 soon and maybe looking for differences between that and the previous. We'll get there. When did you purchase your REV400? Is it just be released onto the market? Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/7Ct83bF34WXq1XsRAhLUAKC2jM3n09zXCUWeD3DwsoBJ4ib+LgCgl5bs A90mhhPzh8SP3OqQc9loYOM= =OMjE -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Silver SpeedTouch 330 Modem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 26 December 2003 09:31 pm, you wrote: Ok Overbeek (mz) wrote: Could any of you (Mike?Martin?) send me this infamous V4 firmware-file please (on my private address). I'm a collector... Ok O. In the meantime I received a ZZZLP2.eni-file (twice) and an unknown KQD6P2.eni (thanx guys!). The ZZZLP2 does not want to be loaded, probably because of modem-run not finding correct startend points inside it. The KQD6P2-file is funny though: I already had one file by that name, but it was smaller (677641 bytes) that this one (761389). The smaller one can be found at the Thomson site. My question now is: where does the big one come from? Or is there some typo going on? (They both work, by the way). Any one to help me out? Ok Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Well, Just to make things interesting, my KQD6P2-file is 744.8 KB. Let us compare checksums: 4dc23adb72007919f30d50ebcf222f8a KQD6P2.eni And I got that from the CD. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/7LB53bF34WXq1XsRAsTlAJ0UvDC7egoUuq00BrYkut23UB+bRwCg3aJP 1vJdmOjP+CHwVZ7Z4nYiX8o= =+vA0 -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Fwd: Re: Silver SpeedTouch 330 Modem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 - -- Forwarded Message -- Subject: Re: Silver SpeedTouch 330 Modem Date: Friday 26 December 2003 09:44 pm From: Michael Eccleston [EMAIL PROTECTED] To: [EMAIL PROTECTED] * From: Martin Galpin * Subject: [speedtouch] Re: Silver SpeedTouch 330 Modem * Date: Fri, 26 Dec 2003 05:36:01 -0800 - -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 26 December 2003 12:28 pm, you wrote: Hello, I have seen in the mailing list other people are having problems with the Silver 330 Rev 4.0 modem. I am having the same problem that the firmware will not upload! I have finally come to the conclusion it is a hardware revision problem. Has anyone a solution? Thanks in anticipation. Mike Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Ah, another troublesome user, like myself. The answer is, as of yet, no solution but some ideas to the problem. Stick around because the answer will come about. I'm planning on taking a look at the ZZxx2.eni firmware for the REV400 soon and maybe looking for differences between that and the previous. We'll get there. When did you purchase your REV400? Is it just be released onto the market? Martin Martin, Yes I am another troublesome user, I bought this modem recently and spent the last two weeks on and off trying to get it working on RH9, Fedora1 and Suse 8.2 and on several different PC's to no avail and hence my conclusion. I have tried the latest drivers from the Thomson site but not the rev 3.0 version driver yet. I did though notice in one place a comment and syslog file from someone who had the mgmt.o on his install disc with the Ver 4.0 modem and he was able to upload it. This was a French install disc I believe but this file is not my Uk install disc. Will endeavour tommorrow to find this person and ask for a copy. Thanks for the reply Mike - --- - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/7NId3bF34WXq1XsRAlS1AJwLJjDhll3qd/fjYg+C6SpoUrMNqQCgqgbe CdGK6ehtH++27bdojnnzjso= =u6IT -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Joy !!! (Was Re: Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Congratulations. Let me just confirm one thing -- you don't have a Rev: 4.00 do you? Have a good christmas, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6skj3bF34WXq1XsRAvfiAJsF7hIt2wV9Mx/mWmW2L+lmWEdyiACgx8Ve ras7xklUv73CZITXBy+dyL8= =zOpj -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Driver V1.2beta3 report
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 25 December 2003 02:38 pm, you wrote: - default timout of 30s is a bit to short for me since I am on an Alcatel DSLM (60s is large and OK for me) there is 2 new firmwares on the R3.0 windows driver CRC:0x698eb734, Size:761389 for Program Files/Thomson/Speedtouch usb/Bin/KQD6P2.eni CRC:0xd7864c39, Size:774192 for Program Files/Thomson/Speedtouch usb/Bin/SACHU3/ZZZLP2.eni It's look the second driver is associated with a new revision number %Avens.ADSL.330%=alcaudsl.Install,USB\VID_06b9PID_4061REV_0400 ;Alcatel ADSL adapter 330 (SACHU3) This particular firmware did not load properly on a green (REV_) or a purple (REV_0200) Dec 25 14:16:00 test modem_run[29065]: modem_run version 1.2-beta3 started by root uid 0 Dec 25 14:16:00 test modem_run[29065]: Found ALCATEL SpeedTouch USB modem Dec 25 14:16:00 test modem_run[29065]: Best offset 0 with probability 75% Dec 25 14:16:01 test modem_run[29065]: Best offset 774184 with probability 75% Dec 25 14:16:01 test modem_run[29065]: Firmware information (CRC:0xd7864c39, Size:774192, Unknown revision - Please report the CRC and size with the revision number to [EMAIL PROTECTED]) Dec 25 14:16:03 test kernel: usb_control/bulk_msg: timeout Dec 25 14:16:03 test kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 Dec 25 14:16:03 test modem_run[29065]: BLOCK1 :883 bytes uploaded : OK Dec 25 14:16:03 test modem_run[29065]: BLOCK2 :511 bytes downloaded : OK Dec 25 14:17:00 test kernel: usb-uhci.c: interrupt, status 2, frame# 691 Dec 25 14:17:00 test kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 4096 ret -110 Dec 25 14:17:00 test modem_run[29065]: BLOCK3 Dec 25 14:17:00 test modem_run[29065]: Retrying to upload microcode (#0) ... Is it not the block1 wich is under KQD6P1.eni (size :991 bytes) or ZZZLP2.eni (size : 935 bytes)? I look at the registry at HKLM/Sofware/Alcatel/Phonebook with V3 driver installed DnLoadDosPath=x:\Program Files\Thomson\SpeedTouch USB\Bin\ DnLoadDosPath_S3=x:\Program Files\Thomson\SpeedTouch USB\Bin\SACHU3\ DnLoadFileNamePhase1=KQD6P1.eni DnLoadFileNamePhase1_S3=ZZZLP1.eni DnLoadFileNamePhase2=KQD6P2.eni DnLoadFileNamePhase2_S3=ZZZLP2.eni Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] If it's any use: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110 usb.c: USB disconnect on device 00:07.2-2 address 2 Is what I get when I try and load ZZZLP2.eni by issuing: # modem_run -f ZZZLP2.eni This is with my silver REV_0400. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6vkE3bF34WXq1XsRAhyKAJ406QOdnHiTTgJSmsGN2z8SEQZBPwCcCY4j yQR3zTHGwLYyTTS2PLctEbE= =tlls -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 No, your line type is one of : - a classical analogic line (pots: plain old telephon system) and use ADSL ANSI/G.dtm annex A - a numeric line (isdn: integrated services numeric line) and use ADSL ANSI/G.dtm annex B ( and UR2 for Germany). Over this line, depending of your ISP, you should use one or various protocols (PPPoA/PPPoE, routed_IP, bridged_IP) Under the windows diagnostic program, you will see your modem type under ADSL pots/rnis (mine is french rnis=isdn) Maybe there is an unsupported change in this new firmware in the manner the firmware is encapsulated in the file. In this V3.0 driver, it is visible that the firmware is no more inside of alcaudsl.sys (the file is too small) but in KDxx2.eni../ZZxx2.eni. Does your REV400 work under windows? Did you try with speedmgmt instead of modem_run? I apoligise, my line type is POSTS in Gdmt.A mode. Well, I was beginning to think they have made a change internally somewhere. Do you think there's going to be much luck until one of the developers comes across one? And yes, I have tried speedmgmt. That didn't work either. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6wxr3bF34WXq1XsRAuxYAJ9If1IVosYbkzRIz7g/hdF6DP3dagCg78Q+ NeH1YdCOEL6ODd95Wle7ut8= =SCxL -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Right, my problem is EXACTLY that. It works perfect in Win98 and I'm even running ICS for my home network for the night just until I can get back to regular NAT. You sound like you're using the kernel space drivers. I have tried them as well as the user space, both without any luck. The lights are the same here too, both green -- the firmware is never uploaded so the ADSL light never flashes like it's suppose to. As for kernel compilation it should only be nesscary if your distribution kernel hasn't got the required pppoa/n_hdlc and speedtch modules included. As far I know the speedtch driver was included in 2.4.23, so pressuming you're running a recent distribution kernel (from Mandrake, or SuSE for instance) it should be fine. I wasn't aware you needed BOTH mgmt.o and alcudsl.sys. From my past experience, it's an either or situation. For arguments sakes however: http://download.ethomson.com/download/speedmgmt.tar.gz is the package which builds mgmt.o. My question about colour was simple. Two days ago my red Speedtouch 330 failed. I was told it was a reconised fault and given a new one on warrenty. Today it arrived, but it was silver. I plugged it in just as my previous one was and logically it should all start up fine -- seeing as they're the same product. That wasn't the case and as I am seeing now it's proving impossible to load the firmware from any of the free [libre] drivers. It just makes me wonder if they maybe have made slightest modification to the silver modems causing the drivers not to work. That's just a cloud in the sky though. This is a problem caused by Alactel -- that is for sure. If they were to document their hardware specifications and release the source code for their firmware I can assure them they'd get a much great response for their products. It's the way forward, they just need to embrace it. I'll keep hunting for a solution, and I hope you do too. We really need one of the developers to confirm one of our theories in order to make real progress. Talk to you later, Martin On Wednesday 24 December 2003 04:53 pm, you wrote: Hiya Martin Mine's silver but works ok under XP. Ironically, due to operateor malfunction, I now don't have XP installed and I decided not to hunt out my XP disks and merely go full blown Linux to see how I coped. I'm not convinced the colour has anything to do with it. You'll understand the ironically fairly soon. I have downloaded speedbundle 1.00 and read the README docuementation at the top of the code tree which says do 'make' and then do 'make install'. Read error messages and plug in modem to connect. So i did 'make' and I read and acted on the error messages, and I did 'make install' which got me to where I was earlier on - expecting to be able to access the interenet via my ADSL account. I poked around with ifcfg-dsl0 and .wvdialrc with no avail. Apart from messing up my dial up connection for a bit which really caused me some worries. I even tried rebooting. Oh and disconnecting and reconnecting the modem, (which resolutely stays green all the time on both ADSL and USB channels). It did all the flickering as described in the faq when I first connected it under XP. I toodled around the speedbundle tree. The HOWTO is meant to be in there somewhere. and that is what I was looking for. I found it in firmware_loader/doc-linux/ If you look in that directory there is an awful lot more info including a howto in 5 European languages. WHat I was able to gather, from the HOWTO is that the files mgmt.o and alcaudsl.sys are *required* to get the modem going. I haven't yet successfully located the mgmt.o file and would love to know where it is. The alcaudsl.sys file is a Windows system driver and the only place you can get it is from the Windows software on the Thompson site ... and you need Windows to unbundle it from the .exe they send you. Ho hum. Now I could go on various winges about having to have Windows to be able to have ADSL via the Alcatel SpeedTouch 330 on Linux. But I suppose it's the manufacturer being inconvenient about Linux and not providing the .sys file accordingly. Either way, I am sure the developers have done the best they are able to. I am however, quite confused about the documentation. The top level README is fairly explicit in saying, do make, do make install, plug in the modem and you are away. The HOWTO starts talking about kernel config ; which in my book seems to be a bit more than plugging in the modem. Which is right? So : 1. if anyone knows the location of mgmt.o please would they let me know. 2. Does anyone know if we have to reconfigure and recompile the kernel? Looking forward to hearing from someone Regards of the season :) Lesley On Wed, 24 Dec 2003 13:23:27 -0800, Martin Galpin [EMAIL PROTECTED] wrote: I just received a new SpeedTouch 330 on warrenty (and to my
[speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Well, as I'm using the userspace drivers, I wont recompile my kernel. I have another box that I have tried the kernelspace and probed the speectch module -- however, I'm not sure if it registered properly. That's all water under the bridge though, the userspace drivers should suffice. My silver modem isn't Rev 2.00, it's 4.00. From what I gathered from Gilles's post earlier, that would mean the ZZZLP2.eni firmware should correspond to this revision -- however, modem_run -f ZZZLP2.eni brings the same old story. I'm running out of ideas here... - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6fET3bF34WXq1XsRAo7JAKDZ/efetyMNZjaW2FIPVXVaTGpibACePzYk plWgkXv42B4zudTbboP2IjM= =HKN+ -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Your modem run under windows with wich version of the driver? Is your ADSL line over ISDN? Maybe I am right but it was just a quick look at the windows V3 driver. I completly don't know what is done inside. I just see a new model REV 4.00 named 'Alcatel ADSL adapter 330 (SACHU3)' and a directory named sachu3 with a firmware inside. So it's look clear to me. The Windows driver is version 3, specifically C:\Windows\System\Alcan5wn.sys is version 300.7.0.2 and the Firmware is version 330 1.0.10 (as reported by the SpeedTouch diagnostic application). It's also reporting that the Hardware version is 3572070, I'm not sure how that relates to REV_400 but heh. It's ADSL over PPPoA, not ISDN. I agree that technically the SACHU3 firmware in the $SPEEDTOUCHDIR/Bin/ directory should work but modem_run -f zzz...emi didn't upload it. Is it still so clear? - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6f6J3bF34WXq1XsRAp7oAJ9a0vtGRNPx9643AHJ7GfpeatST4wCfdoQ/ f5uVeO0PeT49FNbE5LxhAfA= =oHM1 -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 All installed in the kernel. Just need to get the firmware sorted out. Lesley As do I... Does anyone sucessfully use a rev 4.00 330? Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6i/63bF34WXq1XsRAjZAAKCgeI+OOC1eyMN2rOSOMAGhSfmzrQCg61f3 IMorxX72CHCU1FZ21gbGXew= =24cv -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I really don't know if this is going to help I am downloading VMWAre (25 M via 56k dial up wail !!!) then i am going to try and get the alcaudsl sorted from there. VMware does a 30 day trial ( www.vmware.com ) Lesley That would probably work but I would rather not have to emulate the firware -- I would still have to be running Windows AND using ICS. Not to mention that vmware is proprietry! Is that your solution? Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6j5u3bF34WXq1XsRAml4AKD6mef0rxZRbERhyM+XKPP0+nf1BgCg8cLe M1/jVnMqnqVSI0JDrqu5NkY= =QKvE -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 25 December 2003 03:20 am, you wrote: Martin On Thu, 25 Dec 2003 01:33:34 +, Martin Galpin [EMAIL PROTECTED] wrote: That would probably work but I would rather not have to emulate the firware -- I would still have to be running Windows AND using ICS. Not to mention that vmware is proprietry! Is that your solution? I have already downloaded the Windows drivers from the Thomson Speedtouch website. I don't know if this will work but I hope to be able to extract the Windows drivers and get alcaudsl.sys out. I'll use the 30 day trial of VMWare to see if it can be done. At the moment I have no other need of VMWare so don't plan buying it, simply see if it works as a tool for a job that needs to be done. I have finally finished downloading VMWare and have found my XP disk to install it. Will let you know how it all works out. BTW: I have the Alcatel SpeedTouch CD and although I can mount it under Linux I can't read it under Linux. It was OK in XP. Did you have the same problem? Lesley Why can't you read it? I'll try to read mine in the morning, if it works and yours doesn't I'll just archive them up for you. I'm still very uneasy about using vmware for this. Sure, it'll work if you use the bridged adapator it provides for ethernet (then ppp-that for ICL), but I _really_ don't want to do that. Merry Christmas, Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6l6O3bF34WXq1XsRAmEzAJ4wWcj8EoeGGwzil6KzeCGCI6gGIgCgqFvG l88LWo+j+UdTTpkEa0oeako= =gUKg -END PGP SIGNATURE- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]