-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thursday 25 December 2003 02:38 pm, you wrote: > - default timout of 30s is a bit to short for me since I am on an Alcatel > DSLM (60s is large and OK for me) > > there is 2 new firmwares on the R3.0 windows driver > CRC:0x698eb734, Size:761389 for Program Files/Thomson/Speedtouch > usb/Bin/KQD6P2.eni > CRC:0xd7864c39, Size:774192 for Program Files/Thomson/Speedtouch > usb/Bin/SACHU3/ZZZLP2.eni > > It's look the second driver is associated with a new revision number > %Avens.ADSL.330%=alcaudsl.Install,USB\VID_06b9&PID_4061&REV_0400 ;Alcatel > ADSL adapter 330 (SACHU3) > > This particular firmware did not load properly on a green (REV_0000) or a > purple (REV_0200) > Dec 25 14:16:00 test modem_run[29065]: modem_run version 1.2-beta3 started > by root uid 0 > Dec 25 14:16:00 test modem_run[29065]: Found ALCATEL SpeedTouch USB modem > Dec 25 14:16:00 test modem_run[29065]: Best offset 0 with probability > 75% > Dec 25 14:16:01 test modem_run[29065]: Best offset 774184 with probability > 75% > Dec 25 14:16:01 test modem_run[29065]: Firmware information > (CRC:0xd7864c39, Size:774192, Unknown revision - Please report the CRC and > size with the revision number to [EMAIL PROTECTED]) > Dec 25 14:16:03 test kernel: usb_control/bulk_msg: timeout > Dec 25 14:16:03 test kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 > len 512 ret -110 > Dec 25 14:16:03 test modem_run[29065]: BLOCK1 : 883 bytes uploaded : > OK Dec 25 14:16:03 test modem_run[29065]: BLOCK2 : 511 bytes downloaded > : OK Dec 25 14:17:00 test kernel: usb-uhci.c: interrupt, status 2, frame# > 691 Dec 25 14:17:00 test kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep > 0x5 len 4096 ret -110 > Dec 25 14:17:00 test modem_run[29065]: BLOCK3 > Dec 25 14:17:00 test modem_run[29065]: Retrying to upload microcode (#0) > ... > > Is it not the block1 wich is under KQD6P1.eni (size :991 bytes) or > ZZZLP2.eni (size : 935 bytes)? > I look at the registry at HKLM/Sofware/Alcatel/Phonebook with V3 driver > installed > > DnLoadDosPath=x:\Program Files\Thomson\SpeedTouch USB\Bin\ > DnLoadDosPath_S3=x:\Program Files\Thomson\SpeedTouch USB\Bin\SACHU3\ > DnLoadFileNamePhase1=KQD6P1.eni > DnLoadFileNamePhase1_S3=ZZZLP1.eni > DnLoadFileNamePhase2=KQD6P2.eni > DnLoadFileNamePhase2_S3=ZZZLP2.eni > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : > mailto:[EMAIL PROTECTED]
If it's any use: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110 usb.c: USB disconnect on device 00:07.2-2 address 2 Is what I get when I try and load ZZZLP2.eni by issuing: # modem_run -f ZZZLP2.eni This is with my silver REV_0400. Martin - -- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/6vkE3bF34WXq1XsRAhyKAJ406QOdnHiTTgJSmsGN2z8SEQZBPwCcCY4j yQR3zTHGwLYyTTS2PLctEbE= =tlls -----END PGP SIGNATURE----- Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
