Franko wrote:
> Any idea how to get the above to work on a nuc running Windows going
> straight into a dac? Using local player in LMS - can't find the
> mentioned options?
Which Windows OS would help ? Also which Dac and which output (spdif or
usb)
Local Player uses the default Audio output
Any idea how to get the above to work on a nuc running Windows going
straight into a dac? Using local player in LMS - can't find the
mentioned options?
Franko's Profile:
This explains a little about the difference between usb on rpi4 and zero
https://www.raspberrypi.org/documentation/hardware/raspberrypi/usb/README.md
Man in a van's Profile:
Thank you for responding!
Raspberry Pi 4:
I can do whatever I want (turn speakers or squeezelite on and off) and
the active speakers with their build in DAC will be recognized by the
Pi.
I also have a setup with it where I power the speakers on and off with
sequeezelite (see the post
Man in a van wrote:
> do the speakers have an autosensing function ? (they turn off when the
> signal stops)
I found the manual
> Auto-off function The auto on/off function reacts differently, depending
> on the selected input: If no signal is present at the analog input, the
> loudspeaker
Sorry about the questions :rolleyes:
are you using a preamp or is the zero direct into the speakers ?
If the latter do you switch the speakers on first and the zero ?
Man in a van's Profile:
sisiko wrote:
> Its the build in DAC from these active speakers:
>
> https://m.nubert.de/nupro-x-3000-rc/p3349/?category=331
>
> So basically I cannot turn them off and on again and listen with
> piCorePlayer without restarting it.
do the speakers have an autosensing function ? (they turn
sisiko wrote:
> I encounter the exact issue on a raspberry pi zero with picoreplayer and
> an external dac.
>
> On a pi 4 it is not a problem.
>
> But on a pi zero the usb dac "output setting" options in picoreplayer
> dissapear and do not reappear after dis- and reconnecting the external
>
Its the build in DAC from these active speakers:
https://m.nubert.de/nupro-x-3000-rc/p3349/?category=331
So basically I cannot turn them off and on again and listen with
piCorePlayer without restarting it.
sisiko's
Name of the external dac may give an extra clue
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=109934
I encounter the exact issue on a raspberry pi zero with picoreplayer and
an external dac.
On a pi 4 it is not a problem.
But on a pi zero the usb dac "output setting" options in picoreplayer
dissapear and do not reappear after dis- and reconnecting the external
DAC.
With the DAC detected my
Well, I'll be... Tried it! How cool is that?!
meq123's Profile: http://forums.slimdevices.com/member.php?userid=69108
View this thread: http://forums.slimdevices.com/showthread.php?t=109934
Tip: Available output devices (click to use)
Rather than cut and paste you should be able to click on the option. :D
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread:
Just wanted to add another round of thanks for this. My new RPi4 +
Topping E30 DAC install had this problem - if the USB was disconnected
or the DAC turned off while PCP started up (or was running), it would
stop playback until a reboot. Just cutting & pasting the Output setting
line fixed it.
chill wrote:
>
>
> I first tried the top option 'sysdefault:CARD=DAC', and that seemed to
> work and play music properly. But whenever the DAC was disconnected
> (e.g. when using the DLCP USB input for programming the DLCP), it
> required a reboot of the Pi for Squeezelite to find the DAC
Greg Erskine wrote:
>
> Are you guys clicking on the option to update the "Output setting"
> field?
>
In my case, yes. I clicked on the output option in the bulleted list on
the right, which puts that option into the 'Output Setting' field on the
left, then I clicked the 'Save' button at
Thanks for reporting this!
I would have never thought it would make a different in a million years.
:o
Are you guys clicking on the option to update the "Output setting"
field?
regards
Greg
Greg Erskine's Profile:
bpa wrote:
>
> A squeezelite command line option setting may fix the problem for you
> but you'll only which setting if you understand what is happening within
> squeezelite.
I had a similar situation with the USB DAC in a Hypex DLCP. The list of
available output devices offered when this
Thank you everyone for reply.
It is a free software so I don't expect this could get fix. Just want to
share my finding so people are aware this problem exist.
This is the error I got from Squeezelite after unplugging the USB DAC
[22:11:44.506807] output_thread:776 pcm wait error:
LS doesn't see USB or DAC - LMS just sees the squeezelite player. So
you need to check what squeezelite is "seeing" in relation to the putput
device (i.e. USB DAC) to know why it is dicosnnecting from LMS.
Enable Squeezelite logging, enact the failing scenario with logging,
examine the log and
Hi,
since you running picoreplayer with an external powered DAC.
That means two devices acting together as a single system.
The solution is quite simple ;-)
- dont shut only one device off
There are many ways to solve it
Hardware:
Add a shutdown key to the pi
Man in a van wrote:
> By "::disconnect::" do mean mean just select another input or remove the
> usb cable?
>
> I have assumed that you have just selected another input and then
> returned to the usb input.
>
> 'I have asked over on another forum '
>
kayue wrote:
> I am using RME ADI-2 DAC with latest version of piCorePlayer installed
> on Pi 3, and having the same USB problem as this user does:
> https://forums.slimdevices.com/showthread.php?108447-Radio-sometimes-not-working-and-USB-not-connected
>
> ::Basically if I disconnect my USB
kayue wrote:
> It would be great if this problem can be fixed. Thanks.
Ask the Hardware Support from your DAC
btw: http://www.rme-audio.de/products/adi_2-dac.php#9 there is nothing
about "which devices we support on our USB" or "we have driver for this
and that".
Thats a shame.
kayue wrote:
> Basically if I disconnect my USB Dac while LMS is playing, LMS could no
> longer reestablish any USB connection until I reboot my Pi 3.
>
Hi,
maybe its a bug with something but there is a usecase for Picoreplayer:
Buy some cheap stuff like a rpi a dac and maybe a display.
Use
I am using RME ADI-2 DAC with latest version of piCorePlayer installed
on Pi 3, and having the same USB problem as this user does:
https://forums.slimdevices.com/showthread.php?108447-Radio-sometimes-not-working-and-USB-not-connected
Basically if I disconnect my USB Dac while LMS is playing,
26 matches
Mail list logo
