Sent this out a while back.
Don't think I got any replies.
Anyway, Still happening but now with squid 3.1.10/3.1.11
I'd like to do a phased upgrade to 3.1.x but don;t want to try it if
I'm still getting these netdb errors
Rgds
Alex
Hi,
For a while now I've been running a squid 2.7stable7
Hi,
Looking for hints as to how to resolve the above problem.
Occasionally I get
2011/02/10 09:25:42| assertion failed: htcp.cc:1350: sz = 0
2011/02/10 09:25:52| Starting Squid Cache version 3.1.11 for x86_64-
unknown-linux-gnu...
Messages appearing in my cache.log.
The server in question
Sent this out a while back.
Don't think I got any replies.
Anyway, Still happening but now with squid 3.1.10/3.1.11
I'd like to do a phased upgrade to 3.1.x but don;t want to try it if
I'm still getting these netdb errors
Rgds
Alex
Hi,
For a while now I've been running a squid 2.7stable7
the 12
day Escape to Africa challenge
View route at
http://maps.google.co.uk/maps/ms?ie=UTF8hl=enmsa=0msid=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
Macmillan Cancer Support event. This time its the 12
day Escape to Africa challenge
View route at
http://maps.google.co.uk/maps/ms?ie=UTF8hl=enmsa=0msid=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
/Alex-Sharaz
2011/11/28 16:49:16 kid2| Starting Squid Cache version
3.2.0.13-2027-r11436 for x86_64-unknown-linux-gnu...
2011/11/28 16:49:16 kid2| Process ID 10575
2011/11/28 16:49:16 kid2| Process Roles: worker
2011/11/28 16:49:16 kid2| With 49152 file descriptors available
2011/11/28 16:49:16 kid2|
Hi,
2011/12/08 10:05:13 kid5| Starting Squid Cache version
3.2.0.13-20111206-r11454 for x86_64-unknown-linux-gnu...
2011/12/08 10:05:13 kid5| Process ID 6007
2011/12/08 10:05:13 kid5| Process Roles: worker
2011/12/08 10:05:13 kid5| With 49152 file descriptors available
2011/12/08 10:05:13
Chaps,
Getting the following on squid 3.2.0.14 systems
Shutdown: NTLM authentication.
2011/12/19 13:17:38 kid9| Shutdown: Negotiate authentication.
2011/12/19 13:17:38 kid9| Shutdown: Digest authentication.
2011/12/19 13:17:38 kid9| Shutdown: Basic authentication.
2011/12/19 13:18:09 kid9|
View route at
http://maps.google.co.uk/maps/ms?ie=UTF8hl=enmsa=0msid=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
Hi,
I'm running a number of 3.2 caches behind a hardware load balancer
that performs health checks every 30 seconds by doing a head http://
non resolvable FQDN/fred.txt and expecting a 503 status code to be
returned from the server. If it gets this, real traffic is passed to
the cache
.
==
Time for another Macmillan Cancer Support event. This time its the 12
day Escape to Africa challenge
View route at
http://maps.google.co.uk/maps/ms?ie=UTF8hl=enmsa=0msid=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
Running squid 3.2 on a number of machines. Gradually the worker
process die with the FATAL xalloc message shown below. Config at
bottom of email. Then have to clear out cache directory,recreate and
restart squid. Usually wait till there only 1 or 2 workers left and
then do the lot. Would
Well, managed to strip out all the comment and most blank lines in the
config. This is still happening help!!
Here's the config file
auth_param basic program /usr/local/squid/libexec/basic_pam_auth -o
auth_param basic children 10
auth_param basic realm wwwcache3-east Note: Your UserName must
Not a squid query but I was under the impression that I should receive
emails from the squid list having subscribed to it. At the moment the
only way I can see if anyone has replied to a posting is to use a
browser to look at the mail archive . who would I report this to?
rgds
Alex
?ie=UTF8hl=enmsa=0msid=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
Hi,
excerpt from cache.log when running /usr/local/squid/sbin/squid -k
shutdown
2012/01/12 10:45:59 kid7| Open FD READ/WRITE 82 apps.facebook.com:443
2012/01/12 10:45:59 kid7| Open FD READ/WRITE 83 apps.facebook.com:443
2012/01/12 10:45:59 kid7| Open FD READ/WRITE 84
challenge
View route at
http://maps.google.co.uk/maps/ms?ie=UTF8hl=enmsa=0msid=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
Hi all,
I've got a small problem with IE 6 and proxy authentication to a squid 2.5
stable1 set of caches.
I should say at this point that mozilla, netscape 6.2/7.0/7.0.1 and phoenix
0.5 all work correctly
Descn:-
I have 4 squid 2.5stable1 caches connected to a foundry serveriron load
Hi all,
I've been running a number of squid caches for a few years here and am now
looking at enforcing authentication at the cache level. Needless to say
I've got a lot of people now saying why would you want to do that not
another login prompt etc.
While I've got my own ideas as to why we
Quoting Henrik Nordstrom [EMAIL PROTECTED]:
Alex Sharaz wrote:
Quoting Henrik Nordstrom [EMAIL PROTECTED]:
Nobody has written one for the FAQ yet, but there is some documentation
in the documentation to each helper (authentication and/or group
helper).
If you plan on using
hi people,
a couple of messages ago there was some talk about using radius
authentication with squid
If anyone has got some s/w, documentation etc I'd be obliged
alex
hi all,
couple of questions re squid config
My squid hardware is based round systems with a 1.8Zenon cpu 4Gbytes of ram
and 4 36Gbyte disks for cache storage running RH 8.0 with the 2.4.18-24smp
version of the kernel. Each disk has 1 partition set up cachedir ufs 90%
of disk space 256 256
what
Hi,
At the moment I have 4 squid caches connected to a single Foundry Networks
ServerironXL via 100Mbit full duplex links. The ServerIron is connected
into our backbone network via Gigabit link.
Each of the squid caches has 2 100Mbit ethernet ports on the motherboard
As the above confgig has
I'm seeing a few error messages in my squid 2.5.s20030.. caches saying
WARNING squidaio_queue congestion
Anything I can do about it?
alex
Sent using Mulberry 3.01a
and you need one or two more drives..
Regards
Henrik
tor 2003-03-06 klockan 16.51 skrev Alex Sharaz:
I'm seeing a few error messages in my squid 2.5.s20030.. caches saying
WARNING squidaio_queue congestion
Anything I can do about it?
alex
Sent using Mulberry 3.01a
--
Henrik Nordstrom [EMAIL
Hi all,
I've been running squid configured to use pam_auth for a while now in
conjunction with an ldap authentication (pam) module which works fine.
For local reasons I'd like the pam auth procedure to also authenticate
against a radius server I've got.
So
I downloaded and compiled a
Hi all,
quick question
I'm testing out squid authentication on a number of class c subnets here
with specific ACL statements that indicate authentication is required on a
given subnet. At the moment i'm using pam/ldap to implement the
authentication and everything seems to work fine.
For
The fix is now included in the latest fixpack for IE6 so you shouldn;t have
to wait for a special one
alex
--On 31 March 2003 02:51 -0800 Fredi [EMAIL PROTECTED] wrote:
Hello,
Thx for the tip. I called MS Support and I'm still
waiting for that hotfix (they said it can take one
day to send it
hi all,
quick question,
I'm running a number of web caches connected to a foundry ServerIronxL
server load balancing device.
The ServerIron performs L7 health checks every 30 seconds ( which I'm
planning to reduce to about 109 secs)
The only problem is that of course the access logs has got
| * * * * * * * * * * * * * * * * * * * * * * * *
^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
Unix is very simple, but it takes a genius to understand the simplicity.
(Dennis Ritchie)
All I want is a few minutes alone with the source code for the universe
and a quick recompile.
- Original Message -
From: Alex Sharaz [EMAIL
Nordstrom [EMAIL PROTECTED] wrote:
men 2003-05-26 klockan 10.24 skrev Alex Sharaz:
Hi all,
The above message is staring to bother me a bit.
i've got 3 web caches behind a foundry server load balancing box and
although I've switched on digests, each cache comes up with temporarily
disabling (forbidden
Hi,
A while back I reported that even though I'd configured squid to pass the
clients IP address through the cache via the X-Originate-IP header variable
squid was always inserting its own address in the field.
I've just tried sending myself a mail message via hotmail via a 2.5.STABLE3
box
hi all,
i was browsing through one of my cache.log files and noticed a message
saying that the request header size had been exceeded. Given that it was
set to the default of 10K and the conf file says that its usually 512 bytes
ish I wondered
1). Anyone else seeing these messages
2). Having
Chaps,
For a long time now I've blocked direct http/s access to the Internet from
out site and forced everyone to go via our web caches. This has been
working just fine until recently when automatic updates stated failing.
Basically, you can check to see if there are any updates and what they
Hi all,
got what is probably a simple question:-
99% of the time I use an auto proxy config script to select whether to go
direct to a site or via my caches
The othe 1% of the time I configure an explicit web cache ( for testing
purposes) in IE6 and then specify an exclusion list for
hi all
I am currently using a squid radius authentication module with my caches
and am considering moving to a pam_radius setup.
Has anyone used pam_radius with a squid cache?
alex
Sent using Mulberry 3.01a
Yup I do that as well, but if i'm testing a new web cache out I don;t want
to have to keep changing my auto-proxy config file that is load balanced
over 2 machines and services the whole university every time I want to
access a different cache.
Anyway the way to do it in ie6 is to add a
Hi all,
quick question,
I'm running my 3 caches using ext3 file systems. I've noticed a number of
people recommending ReiserFS.
Should I consider moving to ReiserFS? What advantages would it give me over
ext3?
TIA
Alex
Sent using Mulberry 3.01a
hi all,
I'm in the process of evaluating squid2mysql on one of my test servers.
Unfortunately the php prog that actually writes the info into the mysql
database occasionally crashes. As the log file squid uses is actually a
fifo I don't have a copy of the access.log message that caused the
I use Steel Belted Radius by a company called Funk software
AFAIK this server is almost the defacto standard radius server these days
did have to do some tweaking of the phantom record settings to cope with
multiple squid caches but other than that it just works
Alex
--On 08 December 2003 12:25
hi all,
o.k. i've replaced my squid_rad_auth authentication program on one of my
test caches with the squid2mysql authenticator ( having changed sqauth as
the database is on another machine) and added a dummy user into the mysql
db auth table
I can now authenticate to the cache using the
hi all,
Got a small problem here with squid running in conjunction with squid2mysql
on a linux box.
Config is
RH 9 system running as squid cache with a back end mysql database runnning
on another machine.
Perl 5.08 installed with dbi module, mysql drivers and perl::ldap
Created a special file
: Operation aborted.
CPU Usage: 1.060 seconds = 0.540 user + 0.520 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 438
Memory usage for squid via mallinfo():
=
so what's the next step?
any suggestions appreciated
alex
--On 18 December 2003 16:28 + Alex
or just the cache.log
TIA
Alex
Yup just downloaded the latest 2.5S4 snapshot and installed it on one of my
caches and they started. All the other caches are o.k.
alex
--On 14 January 2004 10:37 -0500 Steve Snyder [EMAIL PROTECTED]
wrote:
I'm suddenly getting a lot of these errors. Here's an example:
2004/01/14 10:29:35|
Yup there is a squid2mysql package which although primarily for getting
access log entries into a database also has a mysql authentication module
you can use
Alex
--On 22 January 2004 10:28 +0100 Riccardo Fontana [EMAIL PROTECTED]
wrote:
Hi,
I would like to know if exist some kind of
Hi all,
i've been working on a perl script to write the contents of access.log into
a DB2 database. The script was originally one by Eugene Chernyshev
[
This is a part of Squid2MySQL accounting system.
CopyRight 2001 by Eugene V. Chernyshev mailto:[EMAIL PROTECTED]
]
but modified a
Chaps,
A while back I thought I saw some e-mails discussing the possibility of
caching windows updates files on squid servers and there was mention of
some code/scripts to do this.
Needless to say I've lost that particular messaage. Can someone point me in
the right direction please
TIA
Alex
Chaps,
I'm currently using a basic auth scheme on our squid caches that uses a
radius authentication module
From the squid FAQ
NOTE: The name and password are encoded using ``base64'' (See section 11.1
of RFC 2616). However, base64 is a binary-to-text encoding only, it does
NOT encrypt the
--On 22 September 2004 19:42 +0200 Henrik Nordstrom [EMAIL PROTECTED]
wrote:
On Wed, 22 Sep 2004, Alex Sharaz wrote:
Is there any way I can perform the authentication scheme over a secure
connection
Pick one (or two):
* Use of Digest authentication.
* Use of NTLM authentication.
hmmm got
--On 23 September 2004 12:49 +0200 Henrik Nordstrom [EMAIL PROTECTED]
wrote:
On Thu, 23 Sep 2004, Alex Sharaz wrote:
This sounds interesting, given that almost every man and his dog is
using IE or mozilla/firefox anyone know if they suport proxy
connections over ssl?
Not last time I looked
Cancer Support event. This time its the 12
day Escape to Africa challenge
View route at
http://maps.google.co.uk/maps/ms?ie=UTF8hl=enmsa=0msid=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
=203779866436035016780.00049e867720273b73c39z=8
Please sponsor me at http://www.justgiving.com/Alex-Sharaz
Hi all,
I'm running squid 3.2.x on a 64b bit Ubuntu box configured to support both IPv4
and IPv6. When starting I get
2013/01/10 13:53:31 kid1| Set Current Directory to
/usr/local/squid/var/cache/squid
2013/01/10 13:53:31 kid1| Loaded Icons.
2013/01/10 13:53:31 kid1| HTCP Disabled.
57 matches
Mail list logo