[SR-Users] Help

Hello, How can I configure my Kamalio server to work as multihoming for sctp testing... Please ASAP!! __ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-le...@lists.kamailio.org

[SR-Users] Help with rtpengine_delete()

Hello everyone! I've been struggling with a kamailio scenario with the rtpengine_delete. My scenario is the following: I've setup a Kamailio multihomed, since some of my vendors has provided us a direct link using a different local subnet in eth2 and I have my public IP in eth1. The kamailio

Re: [SR-Users] help to configure topos module configuration

Mailing List Objet : Re: [SR-Users] help to configure topos module configuration Hi, I recently looked into this and I don't believe it's possible. As a work around I used split DNS and an FQDN in the contact. Thanks Matthew On Fri, Mar 18, 2022 at 8:44 AM Patrick Karton mailto:patrickar

Re: [SR-Users] help to configure topos module configuration

Hi, I recently looked into this and I don't believe it's possible. As a work around I used split DNS and an FQDN in the contact. Thanks Matthew On Fri, Mar 18, 2022 at 8:44 AM Patrick Karton wrote: > > Caller <--> (internal_IP) Kamailio (external_IP) <---> Callee > > > I have this set up of

[SR-Users] help to configure topos module configuration

Caller <--> (internal_IP) Kamailio (external_IP) <---> Callee I have this set up of kamailio with 2 interfaces. i use topos module for topology hiding and what i want to do is to send external_IP in Contact Header of request relayed to Callee and internal_IP in Contact Header of response

Re: [SR-Users] Help with rewriting headers for NAT manually

David, Thank you for the suggestion. Do you have any sample config files you can point me at? -- ^C On 1/17/22 12:41 AM, David Villasmil wrote: Take a look at freeSWITCH On Mon, 17 Jan 2022 at 00:58, Chad mailto:ccolu...@hotmail.com>> wrote: Hmm, it did not fix it (calls still work with

Re: [SR-Users] Help with rewriting headers for NAT manually

Michael, Thank you for the feedback. -- ^C On 1/16/22 4:02 PM, Michael Young wrote: Chad, In my experience, if you carrier partner is one of the bigger carriers, and\or you use multiple carriers, Kamailio is the best solution available. With some of the smaller carriers\resellers it just

Re: [SR-Users] Help with rewriting headers for NAT manually

Take a look at freeSWITCH On Mon, 17 Jan 2022 at 00:58, Chad wrote: > Hmm, it did not fix it (calls still work with my other carriers). > It looks to me like it should work, it does use the external IP for > everything. > > It generates an error in the log about making your existing address: >

Re: [SR-Users] Help with rewriting headers for NAT manually

Chad, In my experience, if you carrier partner is one of the bigger carriers, and\or you use multiple carriers, Kamailio is the best solution available. With some of the smaller carriers\resellers it just makes more sense to use Asterisk rather than argue with them about how they are

Re: [SR-Users] Help with rewriting headers for NAT manually

Hmm, it did not fix it (calls still work with my other carriers). It looks to me like it should work, it does use the external IP for everything. It generates an error in the log about making your existing address: topoh [topoh_mod.c:179]: mod_init(): mask address matches myself

Re: [SR-Users] Help with rewriting headers for NAT manually

If I use my external IP do I turn off enable_double_rr? -- ^C On 1/16/22 3:16 PM, Ovidiu Sas wrote: Use your 209.x external IP. On Sun, Jan 16, 2022 at 18:07 Chad mailto:ccolu...@hotmail.com>> wrote: Yes I am using a 172.16.x.x IP and it works, it rewrites the headers, but again

Re: [SR-Users] Help with rewriting headers for NAT manually

I have been reading a lot more about the problem and it seems my mangle/unmangle solution is basically B2BUA. So I need a B2BUA solution and it seems like Kamailio does not really do B2BUA. Instead of installing something else I don't know (SEMS or Sippy), it makes more sense to find something

Re: [SR-Users] Help with rewriting headers for NAT manually

Use your 209.x external IP. On Sun, Jan 16, 2022 at 18:07 Chad wrote: > Yes I am using a 172.16.x.x IP and it works, it rewrites the headers, but > again because 172.16.x.x is also a private IP > it is the same as using my real 10.x.x.x IP. The carrier's ACK throws away > the local IP and sends

Re: [SR-Users] Help with rewriting headers for NAT manually

Yes I am using a 172.16.x.x IP and it works, it rewrites the headers, but again because 172.16.x.x is also a private IP it is the same as using my real 10.x.x.x IP. The carrier's ACK throws away the local IP and sends the response to my 209.x external IP. -- ^C On 1/16/22 1:38 PM, Ovidiu

Re: [SR-Users] Help with rewriting headers for NAT manually

I found a sample config file using topoh, which I copied (with some changes) and added the topoh module to my config. It works fine, but it does not solve the problem. In fact it has the exact same problem, because all the topoh module does is replace one private IP with another in the 2nd (top

Re: [SR-Users] Help with rewriting headers for NAT manually

Most of the time, if you get the right person on the carrier's side and you explain the situation, they will come up with a solution. If not, you need to break the RFC in a way that will counterpart their breakage. The carrier is also using a SIP proxy (maybe kamailio, who knows). In the old

Re: [SR-Users] Help with rewriting headers for NAT manually

on behalf of Chad *Sent:* Sunday, January 16, 2022 10:14 AM *To:* Ovidiu Sas *Cc:* Kamailio (SER) - Users Mailing List *Subject:* Re: [SR-Users] Help with rewriting headers for NAT manually Ok so in short I was not doing anything wrong (although I had some miss-configurations), but the carrier is

Re: [SR-Users] Help with rewriting headers for NAT manually

egards, Shah Hussain From: sr-users on behalf of Chad Sent: Sunday, January 16, 2022 10:14 AM To: Ovidiu Sas Cc: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Help with rewriting headers for NAT manually Ok so in short I was not doing anything wrong (although I had some

Re: [SR-Users] Help with rewriting headers for NAT manually

Ok so in short I was not doing anything wrong (although I had some miss-configurations), but the carrier is (i.e. they are a bad actor). When they said I was doing it wrong, they did not mean in the RFC sense they meant in the "to work with us" sense. Now in order for me to get it to work with

Re: [SR-Users] Help with rewriting headers for NAT manually

As expected, your carrier is bogus and "thinks" it knows better. Your carrier is treating your setup as a dumb endpoint and is re-writing the Contact header: You provide this contact header in 200 OK: Contact: The carrier should set the RURI in ACK like this: ACK

Re: [SR-Users] Help with rewriting headers for NAT manually

I changed the listen per your advice and here is the 200 and ACK. I get no audio and the the call disconnects and I see this is the Asterisk log: [Jan 15 10:17:13] WARNING[29953] chan_sip.c: Retransmission timeout reached on transmission 5ab1525b3712f34c2ab272ae55e649e5@10.44.109.143:5060 for

Re: [SR-Users] Help with rewriting headers for NAT manually

This is false. The IP in the Contact header must be routable by the SIP hop from the top Record-Route header in the reply. The carrier (and it seems that they have a PROXY also) must be able to route to their adjacent SIP hop, which is your public IP (the IP in the second Record-Route header). It

Re: [SR-Users] Help with rewriting headers for NAT manually

Oops ... copy/paste mistake: You need to replace: listen=LISTEN_UDP_PRIVATE advertise MY_PUBLIC_IP:5060 with listen=LISTEN_UDP_PRIVATE -ovidiu On Sat, Jan 15, 2022 at 1:07 PM Ovidiu Sas wrote: > > It doesn't look good because you have the public IP twice in the > Record-Route header. > You need

Re: [SR-Users] Help with rewriting headers for NAT manually

It doesn't look good because you have the public IP twice in the Record-Route header. You need to replace the listen=LISTEN_UDP_PRIVATE advertise MY_PUBLIC_IP:5060 with listen=LISTEN_UDP_PRIVATE advertise MY_PUBLIC_IP:5060 and all should be good. If your carrier is telling you that the IP address

Re: [SR-Users] Help with rewriting headers for NAT manually

Hmm, I don't think you are right that the Contact header can be a private IP even if the RR is correct. I did some research on it and I found several places saying it must be a routable IP which is what the carrier also said. "The Contact header contains the SIP URI where the client wants to

Re: [SR-Users] Help with rewriting headers for NAT manually

It would be great if you are right and I am simply doing something else wrong in the config file! Here is the 200 OK (note I have enable_double_rr enabled): SIP/2.0 200 OK Via: SIP/2.0/UDP 18.###.###.###:5060;branch=z9hG4bK22b2.6b6d30e5.0 Via: SIP/2.0/UDP

Re: [SR-Users] Help with rewriting headers for NAT manually

You have a different problem then. Having private IPs in Contact is fine. You need to lose route the calls (kamailio will add two Record-Route headers) and the origination server will set the RURI to the private IP from Contact, but it will send the in-dialog requests to the public IP of kamailio.

Re: [SR-Users] Help with rewriting headers for NAT manually

Ovidiu, Thank you again for your response. One is public (an internet IP) and one is private (a 10.x ip). Apparently this is a known problem with virtual IPs, it does not work. When the asterisk server responds to the invite it sends a contact header with the private IP and Kamailio does not

Re: [SR-Users] Help with rewriting headers for NAT manually

Hello Chad, The floating IPs that you have, are they both private IPs or one private IP and the other one a public IP? If you have to two floating private IPs, then you need a config like this: listen=FLOATING_UDP_PRIVATE1 advertise PUBLIC_UDP_IP listen=FLOATING_UDP_PRIVATE2 In the config,

Re: [SR-Users] Help with rewriting headers for NAT manually

Ovidiu, Thank you for your response. I have done that, in addition to the linux ip_nonlocal_bind I have also set the Kamailio ip_free_bind=1 and it does not work. Here are my relevant config lines: listen=LISTEN_UDP_PRIVATE advertise MY_PUBLIC_IP:5060 listen=LISTEN_UDP_PUBLIC mhomed=1

Re: [SR-Users] Help with rewriting headers for NAT manually

Hello Chad, You can add a listen directive to your config for the virtual IPs (both public and private) and then you don't need to manually modify any headers or use force_send_socket(). You need to enable non local IP binding so kamailio can start on the server that doesn't have the virtual IP:

[SR-Users] Help with rewriting headers for NAT manually

We are looking for some help (possibly a paid consultant) to help us with our Kamailio setup. To keep this as short as possible: we use Kamailio as a NAT proxy to bridge our external IP and our private IP asterisk servers (via dispatcher). However both the external IP and the internal IP that

Re: [SR-Users] Help with Async transaction responses

19, 2021 12:07 PM To: Kamailio (SER) - Users Mailing List Cc: Mike Tihonchik ; Julie Fowler Subject: Re: [SR-Users] Help with Async transaction responses Hello, Not sure if it works in this scenarios, but did you already tried to use: https://kamailio.org/docs/modules/stable/modules/uac.html#uac

Re: [SR-Users] Help with Async transaction responses

From: sr-users On Behalf Of Michael Friesen Sent: Friday, November 19, 2021 6:57 PM To: sr-users@lists.kamailio.org Cc: Julie Fowler ; Mike Tihonchik Subject: [SR-Users] Help with Async transaction responses Hello, I am attempting to perform some asynchronous lookup upon receiving an

[SR-Users] Help with Async transaction responses

Hello, I am attempting to perform some asynchronous lookup upon receiving an INVITE and then reply with a 3xx response with a modified From header. My workflow now is to create a transaction when receiving the INVITE, suspend the transaction, perform the asynchronous lookup, continue the

Re: [SR-Users] help

Could you gave me the link to ETSI document? Le 8 août 2021 14:41, Said Hassani a écrit :Thanks a lot. I am going to try it. Thank you Le 8 août 2021 10:48, Mojtaba a écrit :Hello there,You should do the following steps:1- Add new AS.2- Add some SPT as a Trigger Points.3- Create IFC linked to

Re: [SR-Users] help

Thanks a lot. I am going to try it. Thank you Le 8 août 2021 10:48, Mojtaba a écrit :Hello there,You should do the following steps:1- Add new AS.2- Add some SPT as a Trigger Points.3- Create IFC linked to AS and Trigger Points.For more information go  to ETSI document,With best regardsMojtaba

Re: [SR-Users] help

Hello there, You should do the following steps: 1- Add new AS. 2- Add some SPT as a Trigger Points. 3- Create IFC linked to AS and Trigger Points. For more information go to ETSI document, With best regards Mojtaba Esfandiari.S On Sun, Aug 1, 2021 at 12:40 AM Karsten Horsmann wrote: > Hi

Re: [SR-Users] help

Hi Said, if no one is answering your questions then you should ask more specific what is the issue and what you try to solve that. That could result in more answers. Kind regards Karsten Horsmann Said Hassani schrieb am Fr., 30. Juli 2021, 08:11: > Dear Team, > > I would like to know how to

[SR-Users] help

Dear Team,  I would like to know how to link Kamailio with openIMSCore?I would like to use Kamailio as an Application server.Please guide me or if there is someone who has worked on this subject, I would like to benefit from his help. __

Re: [SR-Users] Help to overwrite the $od, or another solution

Hello Fred, Thank you, that did replace the to_uri. I'm now facing with another thing: "407 Proxy Authentication Required". I already added the 3 MS Teams GW to trusted source in the FreeSwitch ACL: But still getting this Proxy Authentication Required error. Any tips for investigation is welcome. 

[SR-Users] Help to overwrite the $od, or another solution

Hello, I'm facing to some challenge in my learning process and using Kamalio as MS Teams SBC, the request I receive from MS Teams seems to be correct but I need to overwrite the Original Domain, which is the FQDN of Kamailio itself, to another domain name: INVITE

Re: [SR-Users] Help to overwrite the $od, or another solution

On 5/14/21 2:49 PM, Victor Velo wrote: > Hello, > > the request I receive from MS Teams seems to be correct but I need to > overwrite the Original Domain, which is the FQDN of Kamailio itself, to > another domain name: > > TO: > > rewrite to: > TO: > > What would the best why to achieve this

Re: [SR-Users] Help required in sipwise rtpengine-ng-client and rtpengine-ctl

On 21/01/2021 00.32, mahesh prasad behera wrote: Hi Team, We are using sipwise rtpengine on platform centos 7. To get call related statistics from rtpengine. We tried to use utils "rtpengine-ng-client" and "rtpengine-ctl". But for us both of them are not working. *Rtpengine process

[SR-Users] Help required in sipwise rtpengine-ng-client and rtpengine-ctl

Hi Team, We are using sipwise rtpengine on platform centos 7. To get call related statistics from rtpengine. We tried to use utils "rtpengine-ng-client" and "rtpengine-ctl". But for us both of them are not working. *Rtpengine process status:* [root@ctl utils]# ps -ef |grep rtpengine root

Re: [SR-Users] help: can anybody give me a configuration template of SBC?

Hello, On 17.11.20 07:40, Steve Davies wrote: > > > On Tue, 17 Nov 2020 at 08:37, 陈理军 > wrote: > > Hi > I want to configure Kamailio SIP server to act as a SBC. > I had read the article of Kamailio working as SBC to connect MS > Team project:   >

Re: [SR-Users] help: can anybody give me a configuration template of SBC?

On Tue, 17 Nov 2020 at 08:37, 陈理军 wrote: > Hi > I want to configure Kamailio SIP server to act as a SBC. > I had read the article of Kamailio working as SBC to connect MS Team > project: > https://skalatan.de/en/blog/kamailio-sbc-teams > But I can not find the kamailio.cfg file for this

[SR-Users] help: can anybody give me a configuration template of SBC?

Hi I want to configure Kamailio SIP server to act as a SBC. I had read the article of Kamailio working as SBC to connect MS Team project: https://skalatan.de/en/blog/kamailio-sbc-teams But I can not find the kamailio.cfg file for this scenario. Can anybody give me a configuration template of

Re: [SR-Users] [Help] Kamailio not receive bye requests

Hello, make sure you have advertise public address to the listen sockets. Cheers, Daniel On 31.07.20 04:33, Duy Phan wrote: > Hi guy! >  I use ec2 ubuntu on aws. But kamailio not receive bye requests. > But when I install Kmailio in vultr is OK. > can you help me? > >

Re: [SR-Users] [Help] Kamailio not receive bye requests

Hi, I would start with tcpdump or ngrep for basic is ip a to ip b communicating. Because if the sip request is broken or not correct responded or whatever sngrep didn't shows all on the wire in such cases. Sngrep is great for "its working and I want to see dialogs" imho, not for fundamental

Re: [SR-Users] [Help] Kamailio not receive bye requests

Hi I’d start with sngrep so establish if it’s not receiving the BYE (client/network/nat/firewall/etc issue) or not kamailio is not seeing the BYE. Mark > On 31 Jul 2020, at 03:33, Duy Phan wrote: > > Hi guy! > I use ec2 ubuntu on aws. But kamailio not receive bye requests. > But when I

Re: [SR-Users] Help on dumping running config in Kamailio

$sudo grep -i -a -B100 -A100 'string' /dev/sda1 > file.txt https://unix.stackexchange.com/questions/2677/recovering-accidentally-deleted-files/2680#2680 Good luck! > On 9 Jul 2020, at 05:53, BALL

Re: [SR-Users] Help me open ports for my kamailio

On Wed, 2020-03-04 at 14:49 +0200, Stefan Troplev wrote: > This is my rtpproxy configuration > > /etc/init.d/rtpproxy > > > [snip] The following page from rtpproxy provides an example of opening ports within the service: https://www.rtpproxy.org/doc/master/user_manual.html#idm45633805004384

Re: [SR-Users] Help me open ports for my kamailio

This is my rtpproxy configuration /etc/init.d/rtpproxy #! /bin/sh ### BEGIN INIT INFO # Provides: rtpproxy # Required-Start:$remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: RTP Proxy #

Re: [SR-Users] Help me open ports for my kamailio

On 2/13/20 4:13 AM, Stefan Troplev wrote: > Hi, I've been struggling around with my kamailio configuration. > > I've managed to install kamailio on Ubuntu Server and configured 2 > clients, I've registered them in Zoiper to my server. They can call each > other, but are unable to talk. There is

[SR-Users] Help me open ports for my kamailio

Hi, I've been struggling around with my kamailio configuration. I've managed to install kamailio on Ubuntu Server and configured 2 clients, I've registered them in Zoiper to my server. They can call each other, but are unable to talk. There is no audio heard. Ports opened on the router are

Re: [SR-Users] Help with "routines:ssl3_read_bytes:sslv3 alert bad certificate" kamailio TLS error

Hello, set debug=3 in kamailio.cfg, restart kamailio and try to connect again with the client. Watch the logs and you should get more details about what happens there. Cheers, Daniel On 06.09.19 19:05, da...@aslo.us wrote: > > Hello everyone, > >   > > I am trying to configure TLS in kamailio

[SR-Users] Help with "routines:ssl3_read_bytes:sslv3 alert bad certificate" kamailio TLS error

Hello everyone, I am trying to configure TLS in kamailio (5.2.4) following this guide: [ http://www.kamailio.org/dokuwiki/doku.php/tls:create-certificates ]( http://www.kamailio.org/dokuwiki/doku.php/tls:create-certificates ) Modules: #!define WITH_MYSQL #!define WITH_AUTH #!define

[SR-Users] Help identifying mem leaks

Greetings, Recently one of my Kamailio's started started answering with a lot of 500 replies to requests because of insufficient private memory. The service Kamailio had been running for 6 months now. In order to solve this i increased the private memory settings and restarted the Kamailio.

Re: [SR-Users] HELP ME

You need to edit kamctlrc and add the parameters like engine=MYSQL and users and passwords. Etc. On Tue, 7 May 2019 at 17:03, khadime gaye wrote: > Good morning, > > How I can resolve this problem ? > > << ERROR: Could not load the script in > /usr/local/lib64/kamailio//kamctl/kamdbctl.mysql

[SR-Users] HELP ME

Good morning, How I can resolve this problem ? << ERROR: Could not load the script in /usr/local/lib64/kamailio//kamctl/kamdbctl.mysql for database engine MYSQL ERROR: database engine not loaded - tried 'MYSQL' >> ___ Kamailio (SER) - Users Mailing

Re: [SR-Users] Help request in regards to Kamailio

Kamailio has very extensive documentation for all users at https://www.kamailio.org/w/documentation/ Just browse through it. Thank you. > > On Apr 9, 2019 at 10:47 PM, mailto:azah...@zaion.ai)> wrote: > > > > > Dear, > > > > I am

[SR-Users] Help request in regards to Kamailio

Dear, I am writing to ask for help, I found your Email after I've subscribed to Kamailio.org. I am a beginner in Linux environment ( I worked on Windows for 20 years), it would be very helpful if you can help me installing Kamailio on a computer running Debian and how to use the load balancing

Re: [SR-Users] help with regex extracting from $rb

Am Mittwoch, 31. Oktober 2018, 02:05:09 CET schrieb Sergiu Pojoga: > May be for a start someone can clarify the general rules of engagement in > this battle with regex transformations. > https://www.kamailio.org/wiki/cookbooks/5.1.x/transformations#resubst_expres > sion > > What kind of regex

Re: [SR-Users] help with regex extracting from $rb

May be for a start someone can clarify the general rules of engagement in this battle with regex transformations. https://www.kamailio.org/wiki/cookbooks/5.1.x/transformations#resubst_expression What kind of regex library does this function expect: PCRE, Perl, Java, POSIX BRE/ERE? I've used all

[SR-Users] help with regex extracting from $rb

Hi there, May be some regex gurus can help me out. Being aware that regex's are tricky but not seeing another alternative in this particular case. Trying to extract MOSLQ field from $rb. $var(moslq) = $(rb{re.subst,/.*MOSLQ=([0-9].[0-9])\s+MOSCQ=([0-9].[0-9]).*/\1/s}); Above regex works fine

Re: [SR-Users] Help

Line #859 gives an example of stripping and prefixing. The same principles would apply to modification. --fred On 10/19/18 6:24 AM, Olivier KOFFI wrote: Good morning I want to use kamailio to send calls to an asterisk. My problem is that I want to define call prefixes.  example If the

[SR-Users] Help

Good morning I want to use kamailio to send calls to an asterisk. My problem is that I want to define call prefixes. example If the subscriber calls the 6000, please call us 7000 on transfer to asterisk. Subscribers are at 6000.6001, etc. I want to know exactly which line to modify in

Re: [SR-Users] Help with kamailio/freeswitch

Hi david, You need to use fs_path in your dial string (bridge/originate); ;fs_path=sip:XXX.XXX.XXX.XXX:5060 Where xxx.xxx.xxx.xxx is your proxy. > On 25 Sep 2018, at 17:37, Joel Serrano wrote: > > Have you tried to file a JIRA in case it's a bug? As an alternative, have you > thought of

Re: [SR-Users] Help with kamailio/freeswitch

Have you tried to file a JIRA in case it's a bug? As an alternative, have you thought of using Kamailio as the FS gateway, and then have Kamailio handle all the gateway stuff... (so to your provider, the UAC would be K and not FS)... On Tue, Sep 25, 2018 at 6:04 AM David Villasmil <

[SR-Users] Help with kamailio/freeswitch

Hello guys, I know this is kamailio's mailing list, but I'm getting no answer on freeswitch, and i thought someone here has probably done this is the past. I have a proxy in front of freeswitch. I want freeswitch to use the proxy for everything including the termination to my provider. If I

Re: [SR-Users] help

yes..at start i have issue a command : apt-get update i have run the command with correct format also i.e kamailio but didn't work. For Kamailio installation what the pre-requisite , pls guide us... Also pls tell us on the following... 1. What would be operating system version of Debian (

Re: [SR-Users] help

On Monday 20 August 2018 at 15:52:12, Pravin . wrote: > Herewith attaching the screenshot for the error we are getting after > issuing apt-get install mariadb-server command... 1. Have you ensured your repository index is up to date with "apt-get update" before trying to install? 2. Not

Re: [SR-Users] help

nd > > the only issue I remember having was some missing (.h) files, which I then > had to go the develop libraries for MariaDB. > > > > -Steve > > > > *From:* sr-users * On Behalf Of *Pravin > . > *Sent:* Monday, August 20, 2018 9:52 AM > *To:* Kamail

Re: [SR-Users] help

. -Steve From: sr-users On Behalf Of Pravin . Sent: Monday, August 20, 2018 9:52 AM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] help Herewith attaching the screenshot for the error we are getting after issuing apt-get install mariadb-server command... Pls have a look on attached

Re: [SR-Users] help

Am Montag, 20. August 2018, 15:52:12 CEST schrieb Pravin .: > Herewith attaching the screenshot for the error we are getting after > issuing apt-get install mariadb-server command... > > Pls have a look on attached file. Hello Pravin, it is hard to read the screenshot. Your issue is related to

Re: [SR-Users] help

> "Pravin ." > *Antworten an: *"Kamailio (SER) - Users Mailing List" < > sr-users@lists.kamailio.org> > *Datum: *Montag, 20. August 2018 um 14:51 > *An: *"Kamailio (SER) - Users Mailing List" > *Betreff: *Re: [SR-Users] help > > > >

Re: [SR-Users] help

ommend FN 178618z | LG Salzburg Von: sr-users im Auftrag von Floimair Florian Antworten an: "Kamailio (SER) - Users Mailing List" Datum: Montag, 20. August 2018 um 14:55 An: "Kamailio (SER) - Users Mailing List" Betreff: Re: [SR-Users] help MySQL is no longer part of De

Re: [SR-Users] help

ilio (SER) - Users Mailing List" Betreff: Re: [SR-Users] help Hello , Tried to install Kamailio as per link provided by you https://www.kamailio.org/wiki/install/stable/debian. following commands are not working... apt install mysql-server apt install kamailio kamailio-mysql-modules Getti

Re: [SR-Users] help

Hi, 1-It is regard of your OS, I think the Debian is better. 2-It doesn't need download iso, You could install it from git source. 3- The kamailio has a lot of modules, you could add your favourite modules from source.lst file. It is very straight forward. With Regards.Mojtaba On Sat, Aug 18, 2018

Re: [SR-Users] help

Hi, The installation of Kamailio is straight forward, Just follow the following steps in this site: https://www.kamailio.org/wiki/install/stable/debian Also, you could download Kamailio form git source. With Regards.Mojtaba On Sat, Aug 18, 2018 at 11:52 AM Pravin . wrote: > > Hello Team, > > I

[SR-Users] help

Hello Team, I want to install Kamailio SIP server on centOS server...do we need to download kamailio ISO file and install on server..pls provide the installation procedure/guidelines. Regards Pravin ___ Kamailio (SER) - Users Mailing List

Re: [SR-Users] Help on how to debug cfg_get variable having unexpected value?

8 8:59 AM To: Kamailio (SER) - Users Mailing List; Malcolm O'Hare Subject: Re: [SR-Users] Help on how to debug cfg_get variable having unexpected value? Hello, can you provide more details about what you think is going wrong? The value of this variable is updated by each process when that p

Re: [SR-Users] Help on how to debug cfg_get variable having unexpected value?

Hello, can you provide more details about what you think is going wrong? The value of this variable is updated by each process when that process does some particular operations (e.g., receiving a sip message), it is not propagated automatically to every kamailio process when you do the update

[SR-Users] Help on how to debug cfg_get variable having unexpected value?

I'm trying to debug an issue I've encountered where a variable that I've set using kamcmd cfg.set has an unexpected value when used in kamailio. The variable should be 0 or 1, but it looks like its getting set accidently somehow. 2018-05-11T22:02:58.344260+00:00 ip-172-31-129-45

Re: [SR-Users] Help needed to compile and install kamailio 5.1.2

2018-04-17 7:39 GMT+02:00 vinay kumar : > Hi All, > > I want to compile kamailio 5.1.2 for debian packages amd install on ubuntu > 16.04. > And i have couple of queries. > > 1. can i compile and run kamailio 5.1.2 on ubuntu 16.04(Xenial)? > use our official

[SR-Users] Help needed to compile and install kamailio 5.1.2

Hi All, I want to compile kamailio 5.1.2 for debian packages amd install on ubuntu 16.04. And i have couple of queries. 1. can i compile and run kamailio 5.1.2 on ubuntu 16.04(Xenial)? 2. Im currently using kamailio 4.3.6 with polaris configuration. And the same way can i use kamailio 5.1.2

Re: [SR-Users] Help me!

On Saturday 14 April 2018 at 17:47:43, Do Quang Trung wrote: > I use kamailio 5.1.1 with openssl-1.0.2n. I built openssl with gost engine > supported and the result when i list cipher list as follow: > >

[SR-Users] Help me!

I use kamailio 5.1.1 with openssl-1.0.2n. I built openssl with gost engine supported and the result when i list cipher list as follow:

[SR-Users] Help needed to compile and install kamailio 5.1.2

Hi All, can anyone share me the installtion steps for kamailio 5.1.2? can i compile and run kamailio 5.1.2 on ubuntu 14.04? i have already used 4.3.6 with polaris configuration to bringup kamailio and i wanna upgrade to kamailio 5.1.2 and the same way can i use 5.1.2 with polaris configuration?

Re: [SR-Users] Help on setting UP SIP PRoxy

Hey Ayub, I would take it one step at a time. Kamailio is a toolkit with a bunch of modules. I find it useful to first figure out what features you need in a proxy. This includes understanding what are you trying to protect your backend media servers from, problems you are currently having

[SR-Users] Help on setting UP SIP PRoxy

HI, Myself Ayub from Phonology, Bangalore, India. We are trying to set up an SIP proxy server using Kamailio with Siremis as web interface. Have installed and configured kamailio and siremis but need help in config if sip domain , users and etc... Please revert. Regards Ayub

Re: [SR-Users] Help on Video Conference

Hello, is imsdroid able to host a video conference itself? If not, you need a mcu like freeswitch to host one. Cheers, Daniel On 22.10.17 19:12, Kranti Kumar wrote: > Hello , > I’m trying to build a testbed using the VMware image you kindly have > shared here: >

[SR-Users] Help on Video Conference

Hello , I’m trying to build a testbed using the VMware image you kindly have shared here: https://www.kamailio.org/w/2016/02/kamailio-ims-getting-started-box/ My configuration details: HSS - 10.0.0.9 (./hss.sh) PCSCF - 10.0.0.10 (kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg) ICSCF -

Re: [SR-Users] Help to understand kamailio error msgs

Hello Daniel, Thank you for your clarifications, it was helpfull. Regarding to the Dispatcher error, please see my comment in yellow: - * dispatcher [dispatch.c:1509]: ds_load_replace(): cannot find load for (16720.mydomain.com )* - *dispatcher

Re: [SR-Users] Help to understand kamailio error msgs

Hello, On 06.09.17 15:43, José Seabra wrote: > Hello there, > I'm facing some error msg on my kamailio server in production that i > would like to understand what they means in order to avoid them. > The msg are: > > * /ERROR: tm [t_reply.c:1270]: t_should_relay_response(): ERROR: >

Re: [SR-Users] Help to understand kamailio error msgs

Hi There, Regarding to this error: - *dispatcher [dispatch.c:1509]: ds_load_replace(): cannot find load for (16720.mydomain.com )* - *dispatcher [dispatch.c:2270]: ds_next_dst(): cannot update load distribution* The reason could be because i'm not using

[SR-Users] Help to understand kamailio error msgs

Hello there, I'm facing some error msg on my kamailio server in production that i would like to understand what they means in order to avoid them. The msg are: - *ERROR: tm [t_reply.c:1270]: t_should_relay_response(): ERROR: t_should_relay_response: status rewrite by UAS: stored: 408,

Re: [SR-Users] Help detecting t.38 and routing accordingly

Hello, in voip , it is hard to handle Fax issue. as Daniel said , i seperate/route to another SIP based server, Fax and Voice tel numbers with domain or DID number. in my network it is Asterisk and uses fax_spandsp. Good luck. -- View this message in context:

Re: [SR-Users] Help detecting t.38 and routing accordingly

e task > may be possible leveraging the b2bua module in OpenSIPS but I don’t > want to go down that path!!) > > > > Cheers, > > > > Tim > > > > > *Subject:* Re: [SR-Users] Help detecting t.38 and routing accordingly > > > > Hello, > > to

  1   2   >