Re: [Elphel-support] NC353L ip address

guess… For example: if you knew it was 192.168.1. then it literally would take you 2 seconds (it would only have to scan 255 IPs). If you only knew 192.168. then it would take a minute or two to find. Shane Sanford Concurrent Solutions, LLC From: Support-list On Behalf Of William Smith

Re: [Elphel-support] question about elphel 353 camera

Wei, First I’m just another Elphel user. Secondly I’m by no means a OpenCV expert but I’m not sure you can directly do what you are trying. Please read the following explanation that describes the problem and one possible solution better than I can.

[Elphel-support] NC353L-369-HDD converted to NC353L

I have 4 NC353L cameras I created custom waterproof cases to be used on a agricultural sprayer identifying weeds in crops. Unfortunately one of them appears to have died (it started out as the color being out of whack occasionally and has quickly devolved to not working more often than not and

[Elphel-support] Weather proof

Are there any options for weather proofing the back panel on the nc353l? In general the default camera body looks sufficient for my needs with the exception of the rj45 connector and the gap around it. I have seen the weather proof housing ptp1000445 but that is bit pricy and I have a 45 degre

Re: [Elphel-support] Power requirement

, January 03, 2013 3:42 PM To: Shane Sanford; Elphel List Subject: Re: [Elphel-support] Power requirement Shane, You may use circuit diagram on our wiki page http://wiki.elphel.com/index.php?title=10353 - it links to this PDF file http://wiki.elphel.com/images/2/27/10353e.pdf You may easily

Re: [Elphel-support] Power requirement

11.4v at the camera so an extra margin of safety would be nice otherwise I may need to add a buck/boost regulator into the mix which I would really like to avoid if possible. Shane From: support-list [mailto:support-list@support.elphel.com] Sent: Thursday, January 03, 2013 1:47 PM To: Shane

[Elphel-support] Power requirement

I am using the NC353L with the +12-36v mod and I would like to know the minimal voltage delivered at the rj-45 connector of the camera which everything should work. I remember reading the HDD versions need 12v+ but have not seen anything definitive about non-HDD models. Looking at the data she

Re: [Elphel-support] change camera parameters through Telnet

For the others who have been following the discussion on the list. From: Shane Sanford [mailto:shane.sanf...@concurrent.us] Sent: Friday, December 14, 2012 10:08 AM To: 'Biel Bestué de Luna' Subject: RE: [Elphel-support] change camera parameters through Telnet Yeah, I was aware

Re: [Elphel-support] DC auto-iris

Thanks! You just saved me a reasonable amount of work prototyping and testing to come to the same conclusion... Shane From: support-list [mailto:support-list@support.elphel.com] Sent: Saturday, October 13, 2012 11:42 PM To: Shane Sanford; Elphel List Subject: Re: [Elphel-support] DC

[Elphel-support] DC auto-iris

I have a outdoor application were we think we need a auto-iris lens with our Elphel camera. Is there a existing relatively inexpensive solution for controlling the lens using the Elphel camera? After doing some looking around I have not found anything that fits the bill but before I go and try to

Re: [Elphel-support] Elphel / C#

Andrey, I will be happy to look into it next week when I am back in my office. Shane -Original Message- From: support-list [mailto:support-list@support.elphel.com] Sent: Wednesday, October 3, 2012 12:52 PM To: 'support-list' Subject: Re: [Elphel-support] Elphel / C# Shane, Thank you for

Re: [Elphel-support] Elphel / C#

Thanks for the responses... I did manage to fix the problem and thought I would report it here in case any one runs across it in the future. The error seems to be using any .NET application in my case C#. Specifically when asking for the response from the camera System.Net.WebResponse _WebResp

[Elphel-support] Elphel / C#

I am interested in using my Elphel camera for a robotics project. After playing around with the camera a bit I believe imgsrv offers exactly what I am looking (fast still images). Currently I am using Windows and VS C# 2010 due to some proprietary hardware I having to interface with. Does anybod