We have no internal CF Card connected. Please Tell us how To Enable The SATA
Port
PatricK
Am 05.08.2013 um 22:53 schrieb support-list support-list@support.elphel.com:
Patric,
The only way how SATA can be disabled is if you have internal HDD or CF
cards. internal CF is always IDE master,
Patric,
It is something different in your case - SATA shouid not be disabled (or in
conflict) if you do not have CF cards or internal HDD.
Andrey
On Tue, 06 Aug 2013 03:46:49 -0700 Patrick Eisenkeil wrote
We have no internal CF Card connected. Please Tell us how To Enable The
to enable it.
Patrick
Gesendet:Montag, 29. Juli 2013 um 21:44 Uhr
Von:support-list support-list@support.elphel.com
An:Patrick Eisenkeil patethek...@gmx.net, Elphel List support-list@support.elphel.com
Betreff:Re: [Elphel-support] Elphel NC353L No HDD
Patric,
The only way how SATA can be disabled is if you have internal HDD or CF cards.
internal CF is always IDE master, CF cards master/slave depends on the physical
position and SATA can be set to either master or slave - see
An:Patrick Eisenkeil patethek...@gmx.net, Elphel List support-list@support.elphel.com
Betreff:Re: [Elphel-support] Elphel NC353L No HDD found
Hello Patric,
Our records show that this camera was assembled from the boards outside of Elphel, so while each board
patethek...@gmx.net
Cc:elphel support-list support-list@support.elphel.com
Betreff:Re: [Elphel-support] Elphel NC353L No HDD found
Patrick,I think the interface board (10369) needs to be replaced.You could still try:1. Check the serial port output if you have the cable
:64:08:18:EC
Patrick
Gesendet:Sonntag, 28. Juli 2013 um 23:07 Uhr
Von:Oleg support-list@support.elphel.com
An:Patrick Eisenkeil patethek...@gmx.net
Cc:elphel support-list support-list@support.elphel.com
Betreff:Re: [Elphel-support] Elphel NC353L No HDD found
Hi,
What does dmesg display
Hello Patric,
Our records show that this camera was assembled from the boards outside of
Elphel, so while each board was tested individually, we did not have a chance
to test the assembled camera. Do you know if the camera did work with SATA disk
before?
Andrey
Maybe this has to do with the filesystem in the HDD?
I have the same problem with the same camera and a solid state HDD, simply
the camera doesn't detect the HDD? some people told me that probably the
problem was that I was using a EXT4 file-system while the camera needs an
EXT2 file-system, i
I power it with a separate power Source and it is The Same power Source on The
PC
What Setup do you mean?
Thanks for your help so far
Patrick
Am 26.07.2013 um 19:01 schrieb Oleg support-list@support.elphel.com:
Patrick,
What's the power source for the HDD when connected to the camera?
Patrick,
What's the power source for the HDD when connected to the camera? the same
PC? A picture of your setup might be of help.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 26 July 2013 01:38, Patrick Eisenkeil patethek...@gmx.net wrote:
Yes
I am using an Elphel NC353L.
I tried to connect the HDD via Sata and tired this: http://wiki.elphel.com/index.php?title=HDD_Format
But Step 2 does not show the right result, the camera does not find the HDD
If someone have an idea pleas give me any advice you have
Yes The Hdd Works perfectly on The PCs
Von meinem iPhone gesendet
Am 26.07.2013 um 09:26 schrieb Oleg support-list@support.elphel.com:
Hi Patrick,
How do you power the HDD? Is it detected when connected to a PC?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783
13 matches
Mail list logo
