Re: [Elphel-support] Sensor Flex cable
Thank you Andrey. I think that for now I will just use the cables I have, but may look at order longer cables in the future. Kind regards, *Richard Rigby* Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 13:47, Elphel Support < support-list@support.elphel.com> wrote: > Richard, > > These are custom cables with ground lines shielding data lines and wide > power lines, and their width is lower than regular cables so it is easier > to route them too. I would definitely recommend them for production systems. > > For quick experiments you may use just regular flex jumpers (Digi-Key, > Mouser) with 0.5mm pitch, 30 contacts, t=0.3mm, same side contacts, gold > plating (for testing you may use regular tin plating, I would not recommend > to use them in the sewer environment. > > Andrey > > > On Thu, 15 Nov 2018 16:35:01 -0800 *Richard Rigby > >* wrote > > Hi Andrey, > > Are these cables custom, or can we order them from another supplier? > > Kind regards, > > *Richard Rigby* > Software Developer > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > > > On Fri, 16 Nov 2018 at 12:26, Elphel Support < > support-list@support.elphel.com> wrote: > > ___ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > Richard, > > We have many of only 70mm and 250mm, the other lengths shown here > https://wiki.elphel.com/wiki/File:Elphel_cables.jpeg > > are in just sample quantities ~5, but we can reorder them if needed. > > Andrey > > > On Thu, 15 Nov 2018 15:17:09 -0800 *Richard Rigby > >* wrote > > Hi Andrey, > > At least 100mm up to 130mm. > > The cable we have at the moment are 70mm. > > Kind regards, > > *Richard Rigby* > Software Developer > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > > > On Fri, 16 Nov 2018 at 12:15, Elphel Support < > support-list@support.elphel.com> wrote: > > ___ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > Richard, > > What length of the cables do you need? > > Andrey > > > > > On Thu, 15 Nov 2018 15:10:32 -0800 *Richard Rigby > >* wrote > > Hi Oleg, > > I would like to purchase some of the flex cables used to connect to the > sensors. Could you please provide my with the specs/details required for > purchasing? > > Thank you. > > Kind regards, > > *Richard Rigby* > Software Developer > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > ___ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > > > > ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Sensor Flex cable
Richard, These are custom cables with ground lines shielding data lines and wide power lines, and their width is lower than regular cables so it is easier to route them too. I would definitely recommend them for production systems. For quick experiments you may use just regular flex jumpers (Digi-Key, Mouser) with 0.5mm pitch, 30 contacts, t=0.3mm, same side contacts, gold plating (for testing you may use regular tin plating, I would not recommend to use them in the sewer environment. Andrey On Thu, 15 Nov 2018 16:35:01 -0800 Richard Rigby wrote Hi Andrey, Are these cables custom, or can we order them from another supplier? Kind regards, Richard Rigby Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:26, Elphel Support wrote: ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com Richard, We have many of only 70mm and 250mm, the other lengths shown here https://wiki.elphel.com/wiki/File:Elphel_cables.jpeg are in just sample quantities ~5, but we can reorder them if needed. Andrey On Thu, 15 Nov 2018 15:17:09 -0800 Richard Rigby wrote Hi Andrey, At least 100mm up to 130mm. The cable we have at the moment are 70mm. Kind regards, Richard Rigby Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:15, Elphel Support wrote: ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com Richard, What length of the cables do you need? Andrey On Thu, 15 Nov 2018 15:10:32 -0800 Richard Rigby wrote Hi Oleg, I would like to purchase some of the flex cables used to connect to the sensors. Could you please provide my with the specs/details required for purchasing? Thank you. Kind regards, Richard Rigby Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Sensor Flex cable
Hi Andrey, Are these cables custom, or can we order them from another supplier? Kind regards, *Richard Rigby* Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:26, Elphel Support < support-list@support.elphel.com> wrote: > Richard, > > We have many of only 70mm and 250mm, the other lengths shown here > https://wiki.elphel.com/wiki/File:Elphel_cables.jpeg > > are in just sample quantities ~5, but we can reorder them if needed. > > Andrey > > > On Thu, 15 Nov 2018 15:17:09 -0800 *Richard Rigby > >* wrote > > Hi Andrey, > > At least 100mm up to 130mm. > > The cable we have at the moment are 70mm. > > Kind regards, > > *Richard Rigby* > Software Developer > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > > > On Fri, 16 Nov 2018 at 12:15, Elphel Support < > support-list@support.elphel.com> wrote: > > ___ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > Richard, > > What length of the cables do you need? > > Andrey > > > > > On Thu, 15 Nov 2018 15:10:32 -0800 *Richard Rigby > >* wrote > > Hi Oleg, > > I would like to purchase some of the flex cables used to connect to the > sensors. Could you please provide my with the specs/details required for > purchasing? > > Thank you. > > Kind regards, > > *Richard Rigby* > Software Developer > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > ___ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > > > ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Sensor Flex cable
Richard, We have many of only 70mm and 250mm, the other lengths shown here https://wiki.elphel.com/wiki/File:Elphel_cables.jpeg are in just sample quantities ~5, but we can reorder them if needed. Andrey On Thu, 15 Nov 2018 15:17:09 -0800 Richard Rigby wrote Hi Andrey, At least 100mm up to 130mm. The cable we have at the moment are 70mm. Kind regards, Richard Rigby Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:15, Elphel Support wrote: ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com Richard, What length of the cables do you need? Andrey On Thu, 15 Nov 2018 15:10:32 -0800 Richard Rigby wrote Hi Oleg, I would like to purchase some of the flex cables used to connect to the sensors. Could you please provide my with the specs/details required for purchasing? Thank you. Kind regards, Richard Rigby Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Sensor Flex cable
Hi Andrey, At least 100mm up to 130mm. The cable we have at the moment are 70mm. Kind regards, *Richard Rigby* Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:15, Elphel Support < support-list@support.elphel.com> wrote: > Richard, > > What length of the cables do you need? > > Andrey > > > > > On Thu, 15 Nov 2018 15:10:32 -0800 *Richard Rigby > >* wrote > > Hi Oleg, > > I would like to purchase some of the flex cables used to connect to the > sensors. Could you please provide my with the specs/details required for > purchasing? > > Thank you. > > Kind regards, > > *Richard Rigby* > Software Developer > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > ___ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > > ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Sensor Flex cable
Richard, What length of the cables do you need? Andrey On Thu, 15 Nov 2018 15:10:32 -0800 Richard Rigby wrote Hi Oleg, I would like to purchase some of the flex cables used to connect to the sensors. Could you please provide my with the specs/details required for purchasing? Thank you. Kind regards, Richard Rigby Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
