Keith Addison <[EMAIL PROTECTED]> wrote:
Hi Jonathan
>Kevin, I'm not sure if this relates to what you are doing, but I
>used the POR-15 that was recommended in the JTF site with great
>satisfaction. I coated the inside of 2-55 gallon tanks with half a
>pint. I used the clear paint and it for
Kevin, I'm not sure if this relates to what you are doing, but I
used the POR-15 that was recommended in the JTF site with great
satisfaction. I coated the inside of 2-55 gallon tanks with half a
pint. I used the clear paint and it formed a "shell-like" glaze
that is solid like a rock. I
methly ethyl ketone, a solvent for lots of plastics. MEKP is
methyl ethyl ketone peroxide. It is the peroxide part which is the
catalyst in the polyester formation reaction.
toodles
Thankyou Bob, I didn't realise that, though I know MEK is a solvent.
Mostly the glass-fibre folks seem to
Hi All. My experience with 5 minute epoxie in the acid process was
not too good. I had made a fiberglass braded tube (as used for
electrical
insulation but not coated with silicone) into a stirrer propeller
and attached it to a steel rod. It was incontact with the mix over
night during an
Hi All. My experience with 5 minute epoxie in the acid process was not too
good. I had made a fiberglass braded tube (as used for electrical
insulation but not coated with silicone) into a stirrer propeller and attached
it to a steel rod. It was incontact with the mix over night during a
for me.
-Kevin
- Original Message -
From: "Keith Addison" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, November 01, 2004 8:52 AM
Subject: Re: [Biofuel] Fw: Biodiesel output to galvanized settling
tankw/site tube
> Hello Kevin
>
> >Currently
ernet and waiting
to see what advice they have for me.
-Kevin
- Original Message -
From: "Keith Addison"
To:
Sent: Monday, November 01, 2004 8:52 AM
Subject: Re: [Biofuel] Fw: Biodiesel output to galvanized settling
tankw/site tube
> Hello Kevin
>
> >Currently I
ther with a resin company on the internet and waiting
to see what advice they have for me.
-Kevin
- Original Message -
From: "Keith Addison" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, November 01, 2004 8:52 AM
Subject: Re: [Biofuel] Fw: Biodiesel output to galvani
and waiting
to see what advice they have for me.
-Kevin
- Original Message -
From: "Keith Addison" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, November 01, 2004 8:52 AM
Subject: Re: [Biofuel] Fw: Biodiesel output to galvanized settling
tankw/site tube
&