using these soda kegs for dissolving and dispensing
lye?
Tom
-
Original Message -
From:
Derick Giorchino
To: Biofuel@sustainablelists.org
Sent: Sunday, October 02, 2005 11:06
PM
Subject: Re: [Biofuel] disolving
lye
Hi
there
I have found a
good
:
Derick Giorchino
To:
Biofuel@sustainablelists.org
Sent: Sunday, October 02, 2005 11:06
PM
Subject: Re: [Biofuel] disolving
lye
Hi
there
I have found a
good way to mix the methoxide. The process needs some exposure to the methanol
at this time. I hope to eliminate
]
[mailto:[EMAIL PROTECTED] On
Behalf Of Michael Luich
Sent: Monday, October 03, 2005
9:57 AM
To: Biofuel@sustainablelists.org
Subject: Re: [Biofuel] disolving
lye
I have one as well,
My concern would be the rubber seals and having anything that dangerous under
pressure.
Mike Luich
Salem NH
I have removed the check valves on both
the inlet and exit and replaced them with hydraulic disconnects with a ball
valve behind to stop the flow when not wanted. I dont wory about the dessolving
of the lye. I just mix the heck out of it and when it cools to the point that I
can touch
I've been wondering about
the problems one might encounter trying to dissolve the lye when making
bioheating oil. If I have it right, one would dissolve the same amount of lye as
if makingbiodiesel, but using only half the methanol.
Well worth the effort if you can produce low cost
heating
Ian,
Not knowing your
titration results, or if you are using WVO or virgin oil, I will throw in my 1.5
cents.
I think the
difficulty in dissolving lye in methanol is a matter of the amount of lye needed
to be dissolved/liter of methanol. Dissolving 3.5g/L for virgin oil is easy
enough.
Hello Tom
I've been wondering about the problems one might encounter
trying to dissolve the lye when making bioheating oil. If I have it
right, one would dissolve the same amount of lye as if
making biodiesel, but using only half the methanol.
One-quarter the methanol. The example given
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Thomas Kelly
Sent: Sunday, October 02, 2005
4:52 AM
To: Biofuel@sustainablelists.org
Subject: Re: [Biofuel] disolving
lye
Ian,
Not knowing your titration
results, or if you are using WVO or virgin oil, I will throw in my
