hope to save doing this will be put into
the organic farm on high ground just outside the city. That's it in a
nutshell.
Tom Irwin
From: Manick Harris [mailto:[EMAIL PROTECTED]]To:
Biofuel@sustainablelists.orgSent: Fri, 02 Sep 2005 02:21:06 -0300Subject: Re: [Biofuel] Drying ethanol
Yes, after
You need to measure the volume and density
after and before adosrption and use the pubblished tables to calculate
the conecntration and the make mass balance as you pointed out
Yours truely
Pannirselvam
Natal, RN, Brasil.
On 9/1/05, Tom Irwin [EMAIL PROTECTED] wrote:
Hi All,
I
outside the city. That's it in a nutshell.
Tom Irwin
From: Manick Harris [mailto:[EMAIL PROTECTED]To: Biofuel@sustainablelists.orgSent: Fri, 02 Sep 2005 02:21:06 -0300Subject: Re: [Biofuel] Drying ethanol
Yes, after making temperature correction for waterat 25-30C I get 0.785 which is very near
See if it will blend with gas. it will seperate if not.
From: Tom Irwin [EMAIL PROTECTED]
Date: 2005/09/01 Thu AM 05:54:53 EDT
To: Biofuel@sustainablelists.org
Subject: [Biofuel] Drying ethanol
Hi All,
I finally found a source of 3A molecular sieve. It´s been sitting in 95%
Hello Tom,
May I offer unorthodox solution? Try to measure the specific gravity and density using specific gravity bottle. If it matches sg of pure ethanol you are there for practical purposes, unless you are aiming for AR quality..Tom Irwin [EMAIL PROTECTED] wrote:
Hi All,
I finally found a
Use olny a small amount in a test tube to mix with gas, , if it does not mix
use another 250 grams
of 3A and let sit overnite again, throw the gas mixture away,
From: Tom Irwin [EMAIL PROTECTED]
Date: 2005/09/01 Thu AM 05:54:53 EDT
To: Biofuel@sustainablelists.org
Subject: [Biofuel]
Irwin
From: Manick Harris [mailto:[EMAIL PROTECTED]To: Biofuel@sustainablelists.orgSent: Thu, 01 Sep 2005 09:00:26 -0300Subject: Re: [Biofuel] Drying ethanol
Hello Tom,
May I offer unorthodox solution? Try to measure the specific gravity and density using specific gravity bottle. If it matches sg
[mailto:[EMAIL PROTECTED]
*To:* Biofuel@sustainablelists.org
*Sent:* Thu, 01 Sep 2005 09:00:26 -0300
*Subject:* Re: [Biofuel] Drying ethanol
Hello Tom,
May I offer unorthodox solution? Try to measure the specific gravity
and density using specific gravity bottle
:* Re: [Biofuel] Drying ethanol Hello Tom, May I offer unorthodox solution? Try to measure the specific gravity and density using specific gravity bottle. If it matches sg of pure ethanol you are there for practical purposes, unless you are aiming for AR quality.. */Tom Irwin <[EMAIL PROTEC
--- Tom Irwin [EMAIL PROTECTED] wrote:
Thanks Manick,
I just ran a density test. I got 0.7824g/cc vs. .7893g/cc from my CRC
handbook. The original material is .7924g/cc. That's about a 10 or
12 % removal. with some slop for my measuring technique this might be
good stuff. I'll try
From: Manick Harris [mailto:[EMAIL PROTECTED]To: Biofuel@sustainablelists.orgSent: Thu, 01 Sep 2005 09:00:26 -0300Subject: Re: [Biofuel] Drying ethanol
Hello Tom,
May I offer unorthodox solution? Try to measure the specific gravity and density using specific gravity bottle. If it matches sg of pure
11 matches
Mail list logo
