Pascal Gloor wrote:
btw, our devices, and afaik Init7 onces didnt loss any power at all. Any
explanation?
I do remember that either in Q4 last year or in Q1 this year, the rack
row in 3rd floor (B.. - B20, we have B19) was equipped with a new UPS.
We had to shutdown then early in the morning for
hmm fredy...
facts are:
- the third floor was (as i have seen) without power
- the usv held for about 10-15minutes
- our equipment and the most of them in your floor was out of power
- the some servers from your row (at the window) where also without power (i
think so)
maybe you have a special
Steven Glogger wrote:
facts are:
- the third floor was (as i have seen) without power
maybe. fact is: we lost tiscali international. they are in the first row
(A..) in the third floor. our rack did not go down, we are B19.
- the usv held for about 10-15minutes
- our equipment and the most of
Hi,
Perhaps, this is a stupid question, but which
interface is normaly used, when we buy stm-1 bandwith
from a carrier or when we order a stm-1 connection
to connect two pop of us?
We have cisco7204 routers. Which interface should
we use?
PA-A3-OC3MM= ATM, STM1, Multimode
Title: RE: [swinog] STM-1 Standard Interface?
Hi Patrick
Correct.
We use always internally and externally:
PA-POS-OC3SMI= Packet/Sonet, STM1, Singlemode (IR)
Greets
Günti
|-Original Message-
|From: Patrick Studer [mailto:[EMAIL PROTECTED]]
|Sent: Dienstag, 1. Juli 2003 13:58
Perhaps, this is a stupid question, but which
interface is normaly used, when we buy stm-1 bandwith
from a carrier or when we order a stm-1 connection
to connect two pop of us?
We only use PA-POS-OC3SMI. Only exception would be if you
specifically order an ATM STM-1 service from a carrier.
Fredy Kuenzler wrote:
Pascal Gloor wrote:
btw, our devices, and afaik Init7 onces didnt loss any power at all. Any
explanation?
I do remember that either in Q4 last year or in Q1 this year, the rack
row in 3rd floor (B.. - B20, we have B19) was equipped with a new UPS.
We had to
Andre Oppermann wrote:
[EMAIL PROTECTED] wrote:
Our routers there are up again... but around 50% of peering partners
are still down. IxEurope is not reachable on the phone,
'anschluss ist z.Z. unterbrochen'... Looks like a heavy power
outage...
The building was down. I'm having my
Andre Oppermann wrote:
[..]
Here is what happend to the building power feed. At around 17:30
one fuse breaker at the EWZ building entrace cabinet triggered and
took out phase 2. It took quite some time to figure that one out
because that EWZ cabinet is locked and only EWZ has the key to it.
