Re: [t2] error cross build perl

2009-09-02 Thread Michael Tross
Hi, 2009/8/31, Gerardo Di iorio : > > I have this error on crosscompile perl > > == 17:51:06 =[1]=> Building perl/perl [5.10.1 8.0-trunk]. > -> Reading package config: package/perl/perl/perl.conf > -> Reading build/.../tools.cross/lib/pkg_perl_post.conf > -> Preparing build in src.perl.beaglebo

Re: [t2] Use toolchain outside build tree

2009-01-16 Thread Michael Tross
Hi reinhard, Am Donnerstag, den 15.01.2009, 06:04 -0800 schrieb reinhard doerner: > > Hi all. > > I've successfully compiled embedded-minimal. > No I wish to use the generated toolchain outside of t2 build tree. > > Any recommendation ? Add the following folders to $PATH: ${base}/build/$ID

Re: [t2] udev issues

2009-01-16 Thread Michael Tross
Hi helasz, Am Donnerstag, den 15.01.2009, 09:40 +0100 schrieb hel...@gportal.hu: > Hi All, > > My limited contribution to the udev issue sounds like this: > > (main source: > http://git.kernel.org/?p=linux/hotplug/udev.git;a=blob;hb=HEAD;f=README) > > In my understanding there are only a couple

Re: [T2] Linux-2.6.28 and Squashfs-3.4 not booting.

2009-01-14 Thread Michael Tross
Hi Toan, Am Dienstag, den 13.01.2009, 14:12 -0500 schrieb Toan Pham: > Hi, > > I used to run linux-2.6.21 with an older version of squashfs. > Now, that I upgraded linux-2.6.28 along with squashfs-3.4, > my system did boot b/c it had a root readonly filesystem from squashfs. > the problem is tha

Re: [t2] Can't talk to network--DHCP problem?

2008-12-13 Thread Michael Tross
Hi, Am Montag, den 24.11.2008, 09:27 +0100 schrieb René Rebe: > > [...] > > On trunk there are known problems with the dhcp package since the 4.0.x > > update, this was discussed earlier this year: > > > > http://www.nabble.com/forum/ViewPost.jtp?post=18650084&framed=y > > > > You have to setup d

Re: [t2] Can't talk to network--DHCP problem?

2008-11-23 Thread Michael Tross
Am Samstag, den 22.11.2008, 10:04 -0800 schrieb William Tracy: > On Sat, Nov 22, 2008 at 2:16 AM, Adam Stirk <[EMAIL PROTECTED]> wrote: > > You can try 'modprobe ipv6' then 'dhclient eth0'. > > I tried that, and that time it complained that it couldn't find > '/sbin/dhclient-script'; so I copied

Re: [t2] udev

2008-11-03 Thread Michael Tross
Hi, Am Sonntag, den 02.11.2008, 21:34 + schrieb Adam Stirk: > Hi, > > I have found a problem with the rules in v130 (without testing) the > rules are now being installed to /lib/udev/rules.d instead of > /etc/udev/rules.d this is right, but intentional by the udev authors, introduced in ude

Re: [t2] r31053 breaks TLX target

2008-11-01 Thread Michael Tross
Hi William, Am Freitag, den 31.10.2008, 22:21 -0700 schrieb William Tracy: > Hello, > > I can build the TLX target from SVN revision 31052, but in revision > 31053 and later, uClibc refuses to build. > > The relevant snippet from the log is: > ... lots of LN lines ... > LN include/sys/ucont

Re: [t2] udev

2008-10-28 Thread Michael Tross
Am Dienstag, den 28.10.2008, 16:15 + schrieb Adam Stirk: > If you send me a patch file I will happily test it on a clean build. I > have been looking at the current udev.conf I have an idea for a patch > to fix my NIC persistence problem that I could also incorporate. > > Adam > Voila - here

Re: [t2] udev

2008-10-28 Thread Michael Tross
Hi Adam, Am Dienstag, den 28.10.2008, 15:42 + schrieb Adam Stirk: > Rene, > > > > Is there a reason for using udev v120 instead of udev v130? As I’ve > been looking at my problem of my 5 NIC’s not persisting their name > between reboots and I would like to work on patching this in the T2

Re: [t2] Re: squashfs-tools doesn't build

2008-10-22 Thread Michael Tross
Hi William, Am Dienstag, den 21.10.2008, 10:04 -0700 schrieb William Tracy: > On Tue, Oct 21, 2008 at 12:37 AM, René Rebe <[EMAIL PROTECTED]> wrote: > > I think this was addressed with: > > > > r30904 | mtr | 2008-10-20 20:52:49 +0200 (Mon, 20 Oct 2008) | 2 lines > > Sorry for not getting back.

Re: [t2] dhclient

2008-09-06 Thread Michael Tross
Hi, Am Montag, den 04.08.2008, 16:20 +0200 schrieb René Rebe: > Hi, > > Adam Stirk wrote: > > Hi René, > > > > I have attached my fix for the dhcp package, I don't know whether the is > > the most standard/upstream conforming solution but it works. I have added a > > path.path which fixes the p

Re: [t2] New package esnacc

2008-08-25 Thread Michael Tross
Hi, Am Montag, den 25.08.2008, 18:05 +0200 schrieb =?ISO-8859-1?Q?Marian_Aldenh=F6vel_: > Hi, > > I tried my hand at another new package for T2. > > Esnacc is a compiler that can create C and C++ code for reading and writing > BER-encoded structures specified in ASN.1. > > I ran into two prob

Re: [t2] on 7.0 crosscompiling perl for arm fails

2008-08-05 Thread Michael Tross
y later # version. # --- T2-COPYRIGHT-NOTE-END --- Some cross compile hacks. - Rene Rebe <[EMAIL PROTECTED]> Skip man page installation, requires Fcntl extension in miniperl module - Michael Tross <[EMAIL PROTECTED]> --- perl-5.10.0/Makefile.SH.orig2008-02-08 13:20:57.000

Re: [t2] t2-trunk minimal build

2008-01-12 Thread Michael Tross
Hi, Am Samstag, den 12.01.2008, 09:42 +0100 schrieb René Rebe: > Hi, > > On 11.01.2008, at 18:51, Michael Tross wrote: > > > > > Hi Martin, > > > > Am Donnerstag, den 10.01.2008, 19:17 +0100 schrieb Martin > > Papadopoulos: > >> hi there

Re: [t2] possible Error in squashfs3.2.tar.bz2

2008-01-11 Thread Michael Tross
Hi Matthias, Am Freitag, den 11.01.2008, 14:36 +0100 schrieb Sommer, Matthias: > Hello, > > ATM I'm hanging at an error in squashfs3.2.tar.bz2 > > I get: (sorry I'm bound to Outlook and Windoze for mailing here) > [...] > > ==[build_this_package:923 (last $?=0)> eval echo 'Running make -j3

Re: [t2] t2-trunk minimal build

2008-01-11 Thread Michael Tross
Hi Martin, Am Donnerstag, den 10.01.2008, 19:17 +0100 schrieb Martin Papadopoulos: > hi there, > > since some weeks ago, > the t2-trunk install target ( minimal or what ever) hangs on the console > before prompting for stone you may enter the terminal device name tty1 when the installer script

Re: [t2] autoconf problem

2007-12-18 Thread Michael Tross
2007/12/17, [EMAIL PROTECTED] <[EMAIL PROTECTED]>: > > Michael Tross schrieb: > Hi, > > I guess the problem is due to the missing Carp.pm perl module: > Can't locate Carp.pm in @INC > Did you use the Build-Target script? > > Yes i use > # ./scrip

Re: [t2] autoconf problem

2007-12-17 Thread Michael Tross
Hi, I guess the problem is due to the missing Carp.pm perl module: Can't locate Carp.pm in @INC Did you use the Build-Target script? What is your host system, did you install the necessary developer tools? Regards, Michael 2007/12/17, [EMAIL PROTECTED] <[EMAIL PROTECTED]>: > > hello, > > i

Re: [t2] busybox corrputed my T2 SDE and fc6

2007-12-17 Thread Michael Tross
Hi Komal, 2007/12/17, Komal Pal <[EMAIL PROTECTED]>: > > > I installed T2 SDE anf fc6 on the same system. > I downloaded t2-7.0-rc2.tar.bz2 in /home directory of T2 SDE. And extracted > it in same directory. > When I was building busybox package it gives me error. Then I changed > busybox.desc f

Re: [t2] re-send: T2 in Vmware using 7.0-rc live CD - install, compile problems

2007-09-20 Thread Michael Tross
Hi Randy, 2007/9/19, Randy Macleod <[EMAIL PROTECTED]>: > >Hi, > > No word since September 5th... > Are people busy or is my email not clear? both, I would say ;-) You already found out that the live CD did not include ncurses development header files, and for development purposes probably

Re: [t2] Re: Build of generic target fails

2007-09-06 Thread Michael Tross
Hi Marc, you have a lot of packages that have not been build successfully, like grub, iproute2 and shadow. Some of theses are essential to generate the initrd. Possibly these failures are due to your experiments with tmpfs? To rebuild packages that have once failed you either have to enable this o

Re: [t2] generic eabi arm embedded build uclibc failure

2007-06-20 Thread Michael Tross
Hi James, 2007/6/20, James Newell <[EMAIL PROTECTED]>: Hello, First off, I really like the t2 project concept, but I am a complete newbie to the build system. I was trying to build an embedded generic arm with eabi support and the uclibc stage 1 fails with svn t2-trunc.

Re: [t2] AVR32 Cross compile PKGCONFIG Failed cc1plus not found ?

2007-06-08 Thread Michael Tross
Hi Olivier, 2007/6/7, Olivier Fauchon <[EMAIL PROTECTED]>: Hi, Here is a problem for Pkgconfig cross compilation. I figured out cc1plus was not found by ./configure. How should this be solved 'properly' ? in build stage 0 the SDE needs the host compiler installed on your build machine to

Re: [t2] Isolinux

2007-04-17 Thread Michael Tross
2007/4/17, Hansjörg Pfister <[EMAIL PROTECTED]>: Rene Rebe wrote: >> This feature is only in trunk, so if you run branches/6.0 it's not >> yet in it. That's it. Do you advise me to run trunk in the future? Be prepared that trunk may not build at any time, but if you want to make use of the la

Re: [t2] How to build a single package for specific configuration ?

2007-02-22 Thread Michael Tross
Hi Claudio, 2007/2/21, Claudio Leonel <[EMAIL PROTECTED]>: Hi, I am trying to rebuild a single package for my configuration using the command: ./scripts/Build-Pkg -cfg MYCFG -root auto busybox But the package is installed in the root of my host system (actually it makes a mess because all s

Re: [t2] Trying to build embedded distribution

2007-02-20 Thread Michael Tross
Hi Claudio, 2007/2/19, Claudio Leonel <[EMAIL PROTECTED]>: Hi, We have developed a small distribution using Buildroot for a small x86 thin client (166Mhz, 128MB Ram, 128MB CF) This distribution is uClibc based and doesn't have Xorg. We need now to develop another distribution glibc based so w

Re: [t2] Anyone manages to get T2 installed on a SATA system?

2007-02-12 Thread Michael Tross
Hi Mikael, 2007/2/12, Mikael Ostensson <[EMAIL PROTECTED]>: Dell 745 intel chipset. I can boot my own kernel fine using syslinux and a filesystem derived from ttylinux. Both in legacy mode and native mode. T2 cant seem to create a device for the disks I get the messages: Port has no Device

Re: [t2] Building with MIPS architecture

2006-12-06 Thread Michael Tross
Hi Jasmine. 2006/12/6, Jasmine B. Baluyot <[EMAIL PROTECTED]>: Good day! When building with MIPS architecture, the following configurations were used: - cross-compile is enabled - target distribution is generic embedded - architecture is mips - little endian "./scripts/Build-Target -cfg syst