Re: [Talk-it] foss4g-it2019 a PAdova

[Volker Schmidt]

Offro una sessione sulla mappatura della ciclabiltà.
Volker

On Tue, 4 Sep 2018, 07:43 Matteo Zaffonato,  wrote:

> Provo a sentire la persona dell'Università per eventuali mappature, in
> caso si potrebbe fare qualcosa riguardante il progetto V-IOLA o il progetto
> riguardante le ciclabilità seguito da Volker.
>
> Ciao
> Matteo
>
> Il mar 4 set 2018, 06:49 Alessandro Palmas 
> ha scritto:
>
>> Ciao lista,
>> come avevo chiesto diversi giorni:
>>
>> "Per OSM a seconda di quello che decideremo potrebbe essere o il tardo
>> pomeriggio/serata del 22, altrimenti la giornata di sabato 23.
>> Il mapping party, o almeno solo il mapping party, sembra non riscuota
>> molto consenso. Potremmo pensare quindi a un mapathon usando il Tasking
>> Manager; un mp in parallelo ad altre attività; una scuola di mappatura,
>> ecc..
>>
>> Vorrei sentire i vostri pensieri per poi sintetizzarli la settimana
>> prossima."
>>
>> Vediamo se arriva qualche contributo entro la settimana
>>
>> Alessandro Ale_Zena_IT
>>
>> ___
>> Talk-it mailing list
>> Talk-it@openstreetmap.org
>> https://lists.openstreetmap.org/listinfo/talk-it
>>
> ___
> Talk-it mailing list
> Talk-it@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-it
>
___
Talk-it mailing list
Talk-it@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-it

Re: [Talk-it] foss4g-it2019 a PAdova

[Matteo Zaffonato]

Provo a sentire la persona dell'Università per eventuali mappature, in caso
si potrebbe fare qualcosa riguardante il progetto V-IOLA o il progetto
riguardante le ciclabilità seguito da Volker.

Ciao
Matteo

Il mar 4 set 2018, 06:49 Alessandro Palmas 
ha scritto:

> Ciao lista,
> come avevo chiesto diversi giorni:
>
> "Per OSM a seconda di quello che decideremo potrebbe essere o il tardo
> pomeriggio/serata del 22, altrimenti la giornata di sabato 23.
> Il mapping party, o almeno solo il mapping party, sembra non riscuota
> molto consenso. Potremmo pensare quindi a un mapathon usando il Tasking
> Manager; un mp in parallelo ad altre attività; una scuola di mappatura,
> ecc..
>
> Vorrei sentire i vostri pensieri per poi sintetizzarli la settimana
> prossima."
>
> Vediamo se arriva qualche contributo entro la settimana
>
> Alessandro Ale_Zena_IT
>
> ___
> Talk-it mailing list
> Talk-it@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-it
>
___
Talk-it mailing list
Talk-it@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-it

Re: [Talk-cz] PhotoDB2 - licencovani, podminky pouziti

[Marián Kyral]

Ahoj,




-- Původní e-mail --
Od: Tom Ka 
Komu: OpenStreetMap Czech Republic 
Datum: 3. 9. 2018 14:38:28
Předmět: [Talk-cz] PhotoDB2 - licencovani, podminky pouziti
"Ahoj,

dal jsem dohromady a prokonzultoval s Janem Macurou a Mormegilem
podminky pouziti a licencovani PhotoDB2. Podivejte se prosim na

https://osm.fit.vutbr.cz/photodb2-dev/terms.php

a pokud mate nejake napady, komentare, pripominky, budu za ne vdecny.
Specialne se tyka autoru fotek, u kterych bude s podminkami vyzadovan
souhlas aby to bylo cele pravne nejak rozumne ukotvene (zatim ale nema
smysl cokoliv potvrzovat, je to vyvojova verze).

- Licenci jsem zatim jako nejvhodnejsi dle meho zkoumani napsal CC-BY
4.0, ale je to jedna z hlavnich veci k diskuzi
* CC-XX 3.0 a starsi neresi databaze, neni tedy asi uplne vhodne
* ODbL je vyrazne slozitejsi, mene overena v praxi, mimo OSM temer neznama
* CC-BY nebo CC-BY-SA? (mozne "komercni" vyuziti napr. pro mapy.cz nebo 
KCT?)

- Cilem bylo to mit maximalne jednoduche pri pokryti zakladnich veci,
urcite to lze vyrazne prodlouzit a zeslozitit, ale to podle mne nicemu
nepomuze.
"


Já myslím, že takhle to stačí.





Marián


___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-it] foss4g-it2019 a PAdova

[Alessandro Palmas]

Ciao lista,
come avevo chiesto diversi giorni:

"Per OSM a seconda di quello che decideremo potrebbe essere o il tardo
pomeriggio/serata del 22, altrimenti la giornata di sabato 23.
Il mapping party, o almeno solo il mapping party, sembra non riscuota
molto consenso. Potremmo pensare quindi a un mapathon usando il Tasking
Manager; un mp in parallelo ad altre attività; una scuola di mappatura,
ecc..

Vorrei sentire i vostri pensieri per poi sintetizzarli la settimana
prossima."

Vediamo se arriva qualche contributo entro la settimana

Alessandro Ale_Zena_IT

___
Talk-it mailing list
Talk-it@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-it

Re: [Talk-it] foss4g-it2019 a PAdova

[Luca Delucchi]

Il lun 3 set 2018, 14:48 Matteo Zaffonato  ha scritto:

> Se serve una mano per organizzare qualcosa sono a disposizione insieme al
> resto del coordinamento Wikimedia Italia per il Veneto.
>

Quello che servirà sicuramente è una mano in loco durante i giorni della
conferenza... Qualcuno sarà disponibile?


> Ciao
> Matteo
>

Ciao
Luca

>
___
Talk-it mailing list
Talk-it@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-it

Re: [talk-au] Australia maritime boundaries - import plan

[Warin]

Quibble;

If the ways are not shared with anything else then it is fine.

If the ways are shared .. then I think the source statement needs to go on the 
ways rather than the relation.
This helps stop people moving them to match some physical feature.


On 04/09/18 13:04, Andrew Harvey wrote:


Thanks for the detailed plan Lee. It looks okay to me.
On Mon, 3 Sep 2018 at 23:23, Lee Mason  wrote:

Hello all,



Here is my import plan in regards to the earlier discussion about maritime 
boundaries. Please feel free to ask any questions or make suggestions.



Click here to download the OSM data file with the pre-prepared data for import.



Cheers

Lee



---IMPORT DATA-



DATA SOURCE: DATA TO IMPORT

Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 2014a - 
Geodatabase:



(1a) Australia exclusive economic zone

(1b) Australia contiguous zone

(1c) Australia territorial waters [already in OSM]



Coastal Waters (State/Territory Powers) Act 1980 - Australian Maritime 
Boundaries 2014a - Geodatabase:



(2a) Australia coastal waters limit



Any maritime boundaries for Australia’s Antarctic territory claim will not be 
imported.



There are two EEZs provided by Geoscience Australia:

“NOTE: Two versions of the Exclusive Economic Zone (EEZ) are supplied to 
account for the discrepancy between Seas and Submerged Lands Act 1973. The 
Proclamation under section 10B (26/07/1994), and unratified Treaty between the 
Government of Australia and the Government of the Republic of Indonesia, 
establishing an Exclusive Economic Zone Boundary and Certain Seabed Boundaries 
(Perth, 14 march 1997) [1997] ATNIF 9 - (not yet in force). Although the 
proclamation remains in force, for many matters the limit modified by the 
action of the treaty is the limit that should be applied. This is the default 
depiction of Australia's EEZ.”

http://services.ga.gov.au/gis/rest/services/SSLA_1973_AMB2014a/MapServer



The 1997 treaty amended EEZ limit has been selected for import because, as 
mentioned above, it is the default depiction of Australia’s EEZ.



LICENSE

Both sources are licensed under Creative Commons Attribution 4.0 International 
from Geoscience Australia



WAIVER/ATTRIBUTION

Geoscience waiver and attribution  (ODbL compliant).



OSM DATA FILE:

https://1drv.ms/u/s!AhNsZYj9KZ5gp8gbgMMDbw780UWFww (will keep link active for 
about a month or so)



IMPORT TYPE

One-time import, manual integration using JOSM.



---DATA PREPARATION-



REDUCTION AND SIMPLIFICATION

Only the maritime boundaries mentioned above will be imported from the data 
sources.



Shapefiles have been simplified in QGIS (0.0001 simplification tolerance) to 
reduce the number of points, while maintaining good detail. Minimal or no 
distinguishable change in detail is observed at OSM zoom level 14 and lower.



TAGGING AND RELATIONS

(1a)

-New relation in OSM:

alt_name=Australia (EEZ)

border_type=eez

boundary=maritime

maritime=yes

name=Australia (exclusive economic zone)

source:date=2017-06-24

source= Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
2014a, Perth Treaty 1997 amendment, Geoscience Australia.

type=boundary



(1b)

-New relation in OSM:

border_type=contiguous

boundary=maritime

maritime=yes

name=Australia (contiguous zone)

source:date=2017-06-24

source=Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
2014a, Geoscience Australia.

type=boundary



(1c)

-Will be integrated with the existing Australia relation in OSM. Only required 
for fixes to correct detail (such as around Lord Howe/Elizabeth reef). The 
following tags will be added on the maritime ways:

maritime=yes

description=Territorial sea boundary



The redundant tag (“note= generated from coastline+baseline segments”) will be 
removed from the ways when checked against this Geoscience data.



(2a)

-Will be integrated with existing state/territory relations. The most 
significant change will be that state/territory boundaries will be changed to 
match the coastal water limits instead of Australia’s territorial waters limit.

The following tags will be added on the maritime ways:

maritime=yes

description=Coastal waters boundary



CHANGESET TAG

When uploading, the following sources will be stated:

(1a,b,c) Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
2014a, Geoscience Australia. 2017-06-24.

(2a) Coastal Waters (State/Territory Powers) Act 1980 - Australian Maritime 
Boundaries 2014a, Geoscience Australia. 2017-06-24.





---DATA MERGE WORKFLOW-

Working solo, will take several days or less due to lack of existing data and 
minimal conflation when importing.



WORKFLOW

*Download existing OSM boundaries with overpass API in JOSM for relevant areas.

*Merge data with existing boundaries in OSM/check for overlapping ways or 
relations that share the same boundary



CONFLATION

*No existing relations in OSM will be deleted

*Overlapping ways will be 

Re: [talk-au] Australia maritime boundaries - import plan

[Andrew Harvey]

Thanks for the detailed plan Lee. It looks okay to me.
On Mon, 3 Sep 2018 at 23:23, Lee Mason  wrote:
>
> Hello all,
>
>
>
> Here is my import plan in regards to the earlier discussion about maritime 
> boundaries. Please feel free to ask any questions or make suggestions.
>
>
>
> Click here to download the OSM data file with the pre-prepared data for 
> import.
>
>
>
> Cheers
>
> Lee
>
>
>
> ---IMPORT DATA-
>
>
>
> DATA SOURCE: DATA TO IMPORT
>
> Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 2014a - 
> Geodatabase:
>
>
>
> (1a) Australia exclusive economic zone
>
> (1b) Australia contiguous zone
>
> (1c) Australia territorial waters [already in OSM]
>
>
>
> Coastal Waters (State/Territory Powers) Act 1980 - Australian Maritime 
> Boundaries 2014a - Geodatabase:
>
>
>
> (2a) Australia coastal waters limit
>
>
>
> Any maritime boundaries for Australia’s Antarctic territory claim will not be 
> imported.
>
>
>
> There are two EEZs provided by Geoscience Australia:
>
> “NOTE: Two versions of the Exclusive Economic Zone (EEZ) are supplied to 
> account for the discrepancy between Seas and Submerged Lands Act 1973. The 
> Proclamation under section 10B (26/07/1994), and unratified Treaty between 
> the Government of Australia and the Government of the Republic of Indonesia, 
> establishing an Exclusive Economic Zone Boundary and Certain Seabed 
> Boundaries (Perth, 14 march 1997) [1997] ATNIF 9 - (not yet in force). 
> Although the proclamation remains in force, for many matters the limit 
> modified by the action of the treaty is the limit that should be applied. 
> This is the default depiction of Australia's EEZ.”
>
> http://services.ga.gov.au/gis/rest/services/SSLA_1973_AMB2014a/MapServer
>
>
>
> The 1997 treaty amended EEZ limit has been selected for import because, as 
> mentioned above, it is the default depiction of Australia’s EEZ.
>
>
>
> LICENSE
>
> Both sources are licensed under Creative Commons Attribution 4.0 
> International from Geoscience Australia
>
>
>
> WAIVER/ATTRIBUTION
>
> Geoscience waiver and attribution  (ODbL compliant).
>
>
>
> OSM DATA FILE:
>
> https://1drv.ms/u/s!AhNsZYj9KZ5gp8gbgMMDbw780UWFww (will keep link active for 
> about a month or so)
>
>
>
> IMPORT TYPE
>
> One-time import, manual integration using JOSM.
>
>
>
> ---DATA PREPARATION-
>
>
>
> REDUCTION AND SIMPLIFICATION
>
> Only the maritime boundaries mentioned above will be imported from the data 
> sources.
>
>
>
> Shapefiles have been simplified in QGIS (0.0001 simplification tolerance) to 
> reduce the number of points, while maintaining good detail. Minimal or no 
> distinguishable change in detail is observed at OSM zoom level 14 and lower.
>
>
>
> TAGGING AND RELATIONS
>
> (1a)
>
> -New relation in OSM:
>
> alt_name=Australia (EEZ)
>
> border_type=eez
>
> boundary=maritime
>
> maritime=yes
>
> name=Australia (exclusive economic zone)
>
> source:date=2017-06-24
>
> source= Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
> 2014a, Perth Treaty 1997 amendment, Geoscience Australia.
>
> type=boundary
>
>
>
> (1b)
>
> -New relation in OSM:
>
> border_type=contiguous
>
> boundary=maritime
>
> maritime=yes
>
> name=Australia (contiguous zone)
>
> source:date=2017-06-24
>
> source=Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
> 2014a, Geoscience Australia.
>
> type=boundary
>
>
>
> (1c)
>
> -Will be integrated with the existing Australia relation in OSM. Only 
> required for fixes to correct detail (such as around Lord Howe/Elizabeth 
> reef). The following tags will be added on the maritime ways:
>
> maritime=yes
>
> description=Territorial sea boundary
>
>
>
> The redundant tag (“note= generated from coastline+baseline segments”) will 
> be removed from the ways when checked against this Geoscience data.
>
>
>
> (2a)
>
> -Will be integrated with existing state/territory relations. The most 
> significant change will be that state/territory boundaries will be changed to 
> match the coastal water limits instead of Australia’s territorial waters 
> limit.
>
> The following tags will be added on the maritime ways:
>
> maritime=yes
>
> description=Coastal waters boundary
>
>
>
> CHANGESET TAG
>
> When uploading, the following sources will be stated:
>
> (1a,b,c) Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
> 2014a, Geoscience Australia. 2017-06-24.
>
> (2a) Coastal Waters (State/Territory Powers) Act 1980 - Australian Maritime 
> Boundaries 2014a, Geoscience Australia. 2017-06-24.
>
>
>
>
>
> ---DATA MERGE WORKFLOW-
>
> Working solo, will take several days or less due to lack of existing data and 
> minimal conflation when importing.
>
>
>
> WORKFLOW
>
> *Download existing OSM boundaries with overpass API in JOSM for relevant 
> areas.
>
> *Merge data with existing boundaries in OSM/check for overlapping ways or 
> relations that share the same boundary
>
>
>
> CONFLATION
>
> *No existing relations in OSM will be 

[Talk-lv] amazon logistics un osm

[Rihards]

Īsti nezinu detaļas, bet izskatās, ka Amazon arī tīri labi patīk OSM.

 Anyone noticed the edits from Amazon Logistics, they seem to
have been adding loads of service roads, then today they seem to be
deleting at least some of the ways they have added. (In Scotland at least)

Un daži interesanti raksti:
https://aws.amazon.com/blogs/publicsector/develop-and-extract-value-from-open-data/
https://aws.amazon.com/blogs/big-data/querying-openstreetmap-with-amazon-athena/
https://aws.amazon.com/about-aws/whats-new/2017/06/openstreetmap-public-data-set-now-available-on-aws/
-- 
 Rihards

___
Talk-lv mailing list
Talk-lv@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-lv

[Talk-kosovo] test

[Arianit Dobroshi]

___
Talk-kosovo mailing list
Talk-kosovo@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-kosovo

Re: [Talk-us] Talk-us Digest, Vol 130, Issue 3

[Jay Johnson]

How may I reformat a SD card or microSD card as described above?  How can I
check my card?

On Mon, Sep 3, 2018 at 12:54 AM  wrote:

> Send Talk-us mailing list submissions to
> talk-us@openstreetmap.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.openstreetmap.org/listinfo/talk-us
> or, via email, send a message with subject or body 'help' to
> talk-us-requ...@openstreetmap.org
>
> You can reach the person managing the list at
> talk-us-ow...@openstreetmap.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Talk-us digest..."
>
>
> Today's Topics:
>
>1. Whole-US Garmin Map update - 2018-08-31 (Dave Hansen)
>2. Re: Naming numbered roads as "State Route X", "Interstate X",
>   etc. (Nathan Mills)
>3. Re: Naming numbered roads as "State Route X", "Interstate X",
>   etc. (Kevin Kenny)
>4. Re: Naming numbered roads as "State Route X", "Interstate X",
>   etc. (Paul Johnson)
>5. Denver RTD's public_transport growth (OSM Volunteer stevea)
>
>
> --
>
> Message: 1
> Date: Sun, 02 Sep 2018 14:34:59 +
> From: Dave Hansen 
> To: ,
> Subject: [Talk-us] Whole-US Garmin Map update - 2018-08-31
> Message-ID: 
>
> These are based off of Lambertus's work here:
>
> http://garmin.openstreetmap.nl
>
> If you have questions or comments about these maps, please feel
> free to ask.  However, please do not send me private mail.  The
> odds are, someone else will have the same questions, and by
> asking on the talk-us@ list, others can benefit.
>
> Downloads:
>
> http://daveh.dev.openstreetmap.org/garmin/Lambertus/2018-08-31
>
> Map to visualize what each file contains:
>
>
> http://daveh.dev.openstreetmap.org/garmin/Lambertus/2018-08-31/kml/kml.html
> 
>
> FAQ
>
> 
>
> Why did you do this?
>
> I wrote scripts to joined them myself to lessen the impact
> of doing a large join on Lambertus's server.  I've also
> cut them in large longitude swaths that should fit conveniently
> on removable media.
>
> http://daveh.dev.openstreetmap.org/garmin/Lambertus/2018-08-31
>
> Can or should I seed the torrents?
>
> Yes!!  If you use the .torrent files, please seed.  That web
> server is in the UK, and it helps to have some peers on this
> side of the Atlantic.
>
> Why is my map missing small rectangular areas?
>
> There have been some missing tiles from Lambertus's map (the
> red rectangles),  I don't see any at the moment, so you may
> want to update if you had issues with the last set.
>
> Why can I not copy the large files to my new SD card?
>
> If you buy a new card (especially SDHC), some are FAT16 from
> the factory.  I had to reformat it to let me create a >2GB
> file.
>
> Does your map cover Mexico/Canada?
>
> Yes!!  I have, for the purposes of this map, annexed Ontario
> in to the USA.  Some areas of North America that are close
> to the US also just happen to get pulled in to these maps.
> This might not happen forever, and if you would like your
> non-US area to get included, let me know.
>
> -- Dave
>
>
>
>
> --
>
> Message: 2
> Date: Sun, 02 Sep 2018 16:16:43 -0400
> From: Nathan Mills 
> To: talk-us@openstreetmap.org
> Subject: Re: [Talk-us] Naming numbered roads as "State Route X",
> "Interstate X", etc.
> Message-ID: <80a31c08-0990-446f-aa49-172fc3d87...@nwacg.net>
> Content-Type: text/plain; charset="utf-8"
>
> The New Sapulpa Road situation is in practice a road with a secondary
> name. Just like Flagler Street in part of Miami (FL, not OK) is defined by
> the state legislature as being "Natan A Rok Boulevard" (or similar, working
> from memory here).
>
> My personal opinion is that if local practice and the USPS continue to use
> the old name, that name should stay in the name tag, while the
> Legislature's political name should be tagged as an alt_name. That said,
> there are situations in which most/all signage refers to the new name, in
> which case switching them makes sense. (Martin Luther King Jr. Boulevard in
> Fayetteville, AR being an example. Most still call it 6th Street, but the
> city, nearly all signage, and the USPS' preferred name are all "Martin
> Luther King Jr Boulevard," and they are going to keep it up until everyone
> gets with the program)
>
> Sometimes, the name really is "Highway 66" or "Route 22." Admittedly, it
> can sometimes be hard to tell for sure without local knowledge. As long as
> people do their best and aren't dogmatic about it when someone who knows
> better comes along in the future it will all work out in the end.
>
> -Nathan
>
> On September 1, 2018 5:28:11 PM EDT, Paul Johnson 
> wrote:
> >On Sat, Sep 1, 2018 at 12:01 PM Peter Dobratz  wrote:
> >
> >To 

Re: [OSM-talk-fr] Le site de l'association OSM-FR fait peau neuve

[hu9o]

Ne serait-il pas plus judicieux de renommer "/OpenStreetMap France — La carte
libre et collaborative/" en des termes plus explicites pour les non-initiés
? Ils pourraient se méprendre sur la vrai nature du site en pensant tomber
sur "le vrai OSM" (j'ai été dans ce cas à mes débuts) ou au mieux sur une
version francophone de la carte ("/Bienvenue sur le site OpenStreetMap
France !/"). Il faut dire que le site est sacrément bien référencé.

Quelques suggestions (un sous-titre peux se permettre d'être un peu plus
long) :
OpenStreetMap France — La communauté francophone de la carte libre et
collaborative
OpenStreetMap France — Ressources sur la carte libre et collaborative

Désolé de la ramener après la batailler mais cela me semble un détail
important (et qui peux se régler en un clique dans la config wordpress). 

Pour le reste, bravo pour le coup de peinture fraiche, ça fait vraiment du
bien !






--
Sent from: http://gis.19327.n8.nabble.com/France-f5380434.html

___
Talk-fr mailing list
Talk-fr@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-fr

Re: [OSM-talk-fr] OSM hack-weekend à Karlsruhe

[Vincent Privat]

Je me suis inscrit ! Je ne saurai pas dire grand chose en allemand, mais
comme je sais que tu aimes bien parler français, ça ira :)
D'autres français motivé(e)s ? Ya du beau monde dans les inscrits !
Vincent

Le mer. 22 août 2018 à 22:37, Christine Karch  a
écrit :

> Bonjour,
>
> comme Karlsruhe n'est pas loin de vous (moins de trois heures avec le
> TGV/OUI de Paris) j'aimerais bien vous inviter pour le prochain OSM
> hack-weekend chez nous:
>
> https://wiki.openstreetmap.org/wiki/Karlsruhe_Hack_Weekend_October_2018
>
> N'ayez pas peur .. on parle un peu l'anglais, un peu l'allemand et aussi
> un peu le français. Vous êtes invités de participer.
>
>
> Christine
>
> ___
> Talk-fr mailing list
> Talk-fr@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-fr
>
___
Talk-fr mailing list
Talk-fr@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-fr

[OSM-talk] No access to Overpass API

[Roland Olbricht]

Dear all,

there have been repeated rumors that Overpass API is not reachable from 
everywhere. This is of course not intended from my side.


There has been the conjecture that censorship is involved. As I do see 
accesses from 214 countries (ISO 3166-2) in the world in the logfiles, I 
simply do not know who is censoring where (see below). But there have 
been incidents in the past (funnily, with an US provider), where a 
technical misconfiguration locked out people.


So if you cannot reach any or all of the domains
overpass-api.de
z.overpass-api.de
lz4.overpass-api.de
please contact me (over this list, per private mail, or the OSM messing 
interface if all else fails) to let me know. I will try my best to 
resolve the case.


Best regards,
Roland

---
A list can be found at:
https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2
Not in the logfiles are:
AI, AQ, AS, AX,
BL, BQ, BV,
CC, CK, CX,
EH, FK, FM,
GD, GQ, GS, GW,
HM, IO, KI, KP,
MH, MP, MS,
NF, NR, NU,
PM, PN, PW,
SH, SJ, ST,
TF, TK, UM, WS
With the exception of Western Sahara (EH), Equatoial Guinea (GQ), 
Guinea-Bissau (GW) and North Korea (KP), none of these countries is 
bigger than a few ten thousand inhabitants - it reasonably could be that 
just nobody is using Overpass API from there.


___
talk mailing list
talk@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk

Re: [OSM-talk-fr] Le site de l'association OSM-FR fait peau neuve

[deuzeffe]

On 03/09/2018 14:10, François Lacombe wrote:


L'ergonomie a été complètement revue et une carte avec différents rendus a
été ajoutée à la page d'accueil.
L'accès aux informations utiles pour chacun est désormais plus facile, avec
de grandes rubriques telles que "Contribuer" ou "Utiliser" et un blog pour
partager vos expériences et les actualités nationales.
https://www.openstreetmap.fr/contribuer/


Je l'avais noté lorsque Christian avait publié le lien vers la version 
beta et trouvé que c'est une très riche idée d'avoir inclus l'outil 
WhatOsm (si je ne trompe pas de nom) d'Adrien. Bravo pour ça (en plus de 
la refonte XXIe siècle-like ;p)


Merci à tous et toutes.
--
deuzeffe

___
Talk-fr mailing list
Talk-fr@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-fr

Re: [OSM-talk-be] National Road relation: does order matter?

[Nathan Monfils]

After looking into it further, I can only agree. I added the missing members 
back (one way and a few junctions that were probably overlooked by previous 
mappers), but every roundabout and double road "cuts off" the automatic 
ordering by JOSM.
It seems to consider that a loop breaks the relation order entirely and 
doesn't attempt to follow it any further.

I still pushed the changes since they contain a few added members, but I think 
the N30 (and other N roads) will have to stay unsorted, unless JOSM's sorting 
mechanism starts taking geographical proximity into account instead of 
strictly checking the end nodes.

Regards,

Nathan Monfils


On Monday, September 3, 2018 8:09:28 PM CEST Jo wrote:
> The "problem" with N roads is that they are not linear features, they
> split, recombine, have dangling dead ends, roundabouts and so on.
> 
> Yes, you can group some of the elements, but the next time you sort, other
> groups may be formed, so it's arbitrary.
> 
> Jo
> 
> Op ma 3 sep. 2018 om 20:03 schreef André Pirard :
> > On 2018-09-03 00:24, Jo wrote:
> > 
> > for route=road relations order doesn't matter much. It's impossible to
> > sort them according to any meaningful criterion.
> > 
> > A meaningful criterion to sort a route is so that two adjacent ways of it
> > share one same end node.
> > In other words, that the route is ordered the way you travel it without
> > interruptions.
> > That's what the "sort" buttons of JOSM do.
> > And, beside finding a segment more easily, the schema of the route made by
> > JOSM shows the gaps (missing pieces).
> > And in particular it will show if the road is circular.
> > For example, if you sort the N30, you will see a gap between Boulevard de
> > Fraipont and Avenue de la Libération.
> > And 16 other gaps in total.
> > 
> > Last time I spoke of routes with a Potlatch user, he told me he couldn't
> > sort routes.
> > I don't know about ID and that's quite a time ago.
> > 
> > The N30 should be sorted and corrected.
> > I will let Nathan do it if he's busy with it.
> > 
> > Amitiés,
> > 
> > André.
> > 
> > Polyglot
> > 
> > Op zo 2 sep. 2018 om 22:54 schreef Nathan Monfils  > 
> >> Hello!
> >> 
> >> I was doing some editing on the N30 near Liège, when I noticed that its
> >> relation was completely unordered, with ways near the city center being
> >> next
> >> to ways much further south (see relation `124374`).
> >> 
> >> The wiki defines a relation as an *ordered list*, yet only mentions order
> >> for
> >> bus lines. Is there a need for the road relations to be ordered
> >> correctly?
> >> 
> >> Regards,
> >> 
> >> Nathan Monfils
> > 
> > ___
> > Talk-be mailing list
> > Talk-be@openstreetmap.org
> > https://lists.openstreetmap.org/listinfo/talk-be





___
Talk-be mailing list
Talk-be@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-be

[OSM-talk-be] Fwd: [OSGeo.be-Announce] foss4g.be: Call for presentations - Appel à présentations - Oproep voor presentaties (reminder)

[joost schouppe]

-- Forwarded message -
From: Johan Van de Wauw 
Date: ma 3 sep. 2018 om 09:46
Subject: [OSGeo.be-Announce] foss4g.be: Call for presentations - Appel à
présentations - Oproep voor presentaties (reminder)
To: Moritz Lennert 
Cc: 


Reminder: the call for presentations will close tomorrow night.
Herinnering: de oproep voor presentaties sluit morgenavond
Rappel: l'appel à présentations se terminera demain soir.


Pour la version française de cet appel:
https://2018.foss4g.be/papers.php?lang=fr
Voor de nederlandse versie van deze oproep:
https://2018.foss4g.be/papers.php?lang=nl
To immediately jump to the full information in English:
https://2018.foss4g.be/papers.php?lang=en


After successful events in 2015, 2016 and 2017, OSGeo.be will organize
another edition of the FOSS4G Belgium Conference on Thursday 25 October
2018 in Brussels. We are looking for contributors who want to support
this event through a presentation.

FOSS4G conferences gather developers and users of Open Source geospatial
software from around the world to discuss new directions, exciting
implementations, and growing business opportunities in this domain.
Recent years have seen substantial changes in the geospatial industry.
One of those changes has been the growth in maturity and adoption of
Free and Open Source solutions. In many cases organizations are using a
mixture of open and closed source solutions.

We will share knowledge and experiences during the whole event through
presentations and demonstrations with 25 minutes each at most.

To submit a proposal go to http://2018.foss4g.be/submit-paper.php.

Looking forward to hearing from you !

Best wishes,

the foss4g.be team
___
Belgium-Announce mailing list
belgium-annou...@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/belgium-announce


-- 
Joost Schouppe
OpenStreetMap  |
Twitter  | LinkedIn
 | Meetup

___
Talk-be mailing list
Talk-be@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-be

Re: [Talk-GB] Road refs

[Toby Speight]

0> In article <1535573378846-0.p...@n8.nabble.com>,
0> Richard Fairhurst mailto:rich...@systemed.net> ("Richard") wrote:

Richard> Toby Speight wrote:
>> That's why we have
>> rendering rules - if you don't like the rendering, change the rules.

Richard> What you're suggesting would imply that every worldwide site using
Richard> OSM data to display a consumer-facing map, or provide routing,
Richard> needs to write a special exception for Great Britain. With the
Richard> best will in the world, that doesn't and isn't going to happen. (I
Richard> think only one such site does so, and it's the one I run!)

Yeah, it seems that most don't make use of country-level tags, and
that's unfortunate: it leads to the situation we have now where every
mini-roundabout also has to have a "direction" tag instead of the router
just reading a country-level tag (hypothetically, "drives_on=left").

I guess the problem is that the API doesn't return enclosing areas like
it returns containing relations, so it's harder to see from a tile what
adminstrative region it's in.


Richard> Dave's edit (minutiae about highway_authority_ref vs
Richard> unsigned_ref vs official_ref aside[1]) brings this country into
Richard> line with how most of the rest of the world does it: the ref=
Richard> tag is for signposted references. See how
Richard> https://wiki.openstreetmap.org/wiki/Key:ref#Examples_on_ways
Richard> refers to "on the ground", "on the signs", "the usage on the
Richard> signs".

That text appears to be talking about whether refs include spaces or
hyphens, not whether to use ref or another tag (if there is another tag
that's understood worldwide, then it makes sense to do the same - but it
should be listed with Key:ref on the tag wiki so it can be found).

___
Talk-GB mailing list
Talk-GB@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-gb

Re: [Talk-GB] GB does not include Northern Ireland

[Dan S]

Op ma 3 sep. 2018 om 19:06 schreef Toby Speight :
>
> >> Even in these days of Brexit, I don't think there's any movement for
> >> Northern Ireland to leave GB.  You've been misinformed!
>
> 0> In article ,
> 0> Martin Wynne mailto:mar...@templot.com> ("Martin") wrote:
>
> Martin> Northern Ireland is part of the UK but it's not part of GB.
>
> But UK is just an informal name for GB - The United Kingdom of Great
> Britain and Northern Ireland.  It even has "Northern Ireland" in the
> name.  GB without Northern Ireland would just be England, Scotland and
> Wales or the island of Britain.

Please allow me to differ: "UK is an informal name for GB" is not
completely correct. The naming of these islands is utterly confusing -
I blame history! This wikipedia page and the Venn diagram are useful:
https://en.wikipedia.org/wiki/Terminology_of_the_British_Isles
So. The official name of the state is "The United Kingdom of Great
Britain and Northern Ireland". Often abbreviated to "UK". "Great
Britain", often abbreviated to "GB", is the name for that biggest
island within that state. HOWEVER, that doesn't settle the matter,
because "GB" is also used officially to refer to the UK (in
particular, via ISO3166).
So if we see the initials "GB" without any context, we can't work out
if the intention is to include NI or not - but in practice, people are
usually referring to the whole state, and often don't know there's any
difference.

Of course, all this terminological back-and-forth is pedantic and I'm
sorry to extend it, since the original issues are more important for
us. I repeat my call for the "talk-gb" moderators to update the
description on https://lists.openstreetmap.org/listinfo/talk-gb to
explicitly say it's for all of the UK, if indeed it is. That way, we
have an anchoring point that could settle these discussions nicely...

Best
Dan

___
Talk-GB mailing list
Talk-GB@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-gb

Re: [OSM-talk-fr] Le site de l'association OSM-FR fait peau neuve

[Cédric Frayssinet]

Bravo et merci à toutes les personnes qui ont permis cette mise à jour
bienvenue !

C'est du très beau boulot.

Cédric

Le 03/09/2018 à 14:10, François Lacombe a écrit :
> Bonsoir à tous,
>
> Cela avait été annoncé lors du dernier SOTM-Fr à Bordeaux en Juin
> dernier, la nouvelle version du site web de l'association arrivait à
> maturité.
> L'été a permis de faire les dernières finitions et elle a été mise en
> ligne dans le courant du week-end.
> https://www.openstreetmap.fr/
>
> L'ergonomie a été complètement revue et une carte avec différents
> rendus a été ajoutée à la page d'accueil.
> L'accès aux informations utiles pour chacun est désormais plus facile,
> avec de grandes rubriques telles que "Contribuer" ou "Utiliser" et un
> blog pour partager vos expériences et les actualités nationales.
> https://www.openstreetmap.fr/contribuer/
> https://www.openstreetmap.fr/actualites/
>
> En remerciant Noémie, Flora et Florian pour le développement et
> Jocelyn pour l'administration et la bascule de ce week-end
>
> Bonne consultation et à bientôt
>
> François pour le CA de l'association
>
>
> ___
> Talk-fr mailing list
> Talk-fr@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-fr


-- 
Dégooglisé !  - Sociétaire Enercoop
, l'énergie militante

Sur Mastodon : @bristow...@framapiaf.org 

Promouvoir et soutenir le logiciel libre 

___
Talk-fr mailing list
Talk-fr@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-fr

Re: [OSM-talk-be] National Road relation: does order matter?

[Jo]

The "problem" with N roads is that they are not linear features, they
split, recombine, have dangling dead ends, roundabouts and so on.

Yes, you can group some of the elements, but the next time you sort, other
groups may be formed, so it's arbitrary.

Jo

Op ma 3 sep. 2018 om 20:03 schreef André Pirard :

> On 2018-09-03 00:24, Jo wrote:
>
> for route=road relations order doesn't matter much. It's impossible to
> sort them according to any meaningful criterion.
>
> A meaningful criterion to sort a route is so that two adjacent ways of it
> share one same end node.
> In other words, that the route is ordered the way you travel it without
> interruptions.
> That's what the "sort" buttons of JOSM do.
> And, beside finding a segment more easily, the schema of the route made by
> JOSM shows the gaps (missing pieces).
> And in particular it will show if the road is circular.
> For example, if you sort the N30, you will see a gap between Boulevard de
> Fraipont and Avenue de la Libération.
> And 16 other gaps in total.
>
> Last time I spoke of routes with a Potlatch user, he told me he couldn't
> sort routes.
> I don't know about ID and that's quite a time ago.
>
> The N30 should be sorted and corrected.
> I will let Nathan do it if he's busy with it.
>
> Amitiés,
>
> André.
>
> Polyglot
>
> Op zo 2 sep. 2018 om 22:54 schreef Nathan Monfils  >:
>
>> Hello!
>>
>> I was doing some editing on the N30 near Liège, when I noticed that its
>> relation was completely unordered, with ways near the city center being
>> next
>> to ways much further south (see relation `124374`).
>>
>> The wiki defines a relation as an *ordered list*, yet only mentions order
>> for
>> bus lines. Is there a need for the road relations to be ordered correctly?
>>
>> Regards,
>>
>> Nathan Monfils
>>
>
> ___
> Talk-be mailing list
> Talk-be@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-be
>
___
Talk-be mailing list
Talk-be@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-be

Re: [Talk-GB] GB does not include Northern Ireland

[Toby Speight]

>> Even in these days of Brexit, I don't think there's any movement for
>> Northern Ireland to leave GB.  You've been misinformed!

0> In article ,
0> Martin Wynne mailto:mar...@templot.com> ("Martin") wrote:

Martin> Northern Ireland is part of the UK but it's not part of GB.

But UK is just an informal name for GB - The United Kingdom of Great
Britain and Northern Ireland.  It even has "Northern Ireland" in the
name.  GB without Northern Ireland would just be England, Scotland and
Wales or the island of Britain.

___
Talk-GB mailing list
Talk-GB@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-gb

Re: [OSM-talk-be] National Road relation: does order matter?

[André Pirard]

On 2018-09-03 00:24, Jo wrote:
for route=road relations order doesn't matter much. It's impossible to 
sort them according to any meaningful criterion.
A meaningful criterion to sort a route is so that two adjacent ways of 
it share one same end node.
In other words, that the route is ordered the way you travel it without 
interruptions.

That's what the "sort" buttons of JOSM do.
And, beside finding a segment more easily, the schema of the route made 
by JOSM shows the gaps (missing pieces).

And in particular it will show if the road is circular.
For example, if you sort the N30, you will see a gap between Boulevard 
de Fraipont and Avenue de la Libération.

And 16 other gaps in total.

Last time I spoke of routes with a Potlatch user, he told me he couldn't 
sort routes.

I don't know about ID and that's quite a time ago.

The N30 should be sorted and corrected.
I will let Nathan do it if he's busy with it.

Amitiés,

André.



Polyglot

Op zo 2 sep. 2018 om 22:54 schreef Nathan Monfils 
mailto:nathanmonf...@gmail.com>>:


Hello!

I was doing some editing on the N30 near Liège, when I noticed
that its
relation was completely unordered, with ways near the city center
being next
to ways much further south (see relation `124374`).

The wiki defines a relation as an *ordered list*, yet only
mentions order for
bus lines. Is there a need for the road relations to be ordered
correctly?

Regards,

Nathan Monfils



___
Talk-be mailing list
Talk-be@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-be

Re: [Talk-it] Incontro gruppo Osm-Veneto di ottobre

[Matteo Zaffonato]

Si è chiuso il sondaggio, appuntamento giovedì 11 ottobre dalle 17:45 alle
19:30 presso il Museo di Geografia in Via del Santo 26 a Padova.

Ciao
Matteo

Il mer 29 ago 2018, 21:24 Matteo Zaffonato  ha scritto:

> Ciao a tutti,
> volevo segnalare ai mappatori veneti non iscritti alla ML Talk-it-Veneto
> l'incontro del gruppo Osm-Veneto di ottobre a Padova.
>
>
> https://lists.openstreetmap.org/pipermail/talk-it-veneto/2018-August/75.html
>
> Ciao, grazie
> Matteo "Zaffo80" Zaffonato
>
___
Talk-it mailing list
Talk-it@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-it

[talk-au] Australia maritime boundaries - import plan

[Lee Mason]

Hello all,

Here is my import plan in regards to the earlier discussion about maritime 
boundaries. Please feel free to ask any questions or make suggestions.

Click here to download the OSM data file with the pre-prepared data for 
import.

Cheers
Lee

---IMPORT DATA-

DATA SOURCE: DATA TO IMPORT

  1.  Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 2014a 
- 
Geodatabase:

(1a) Australia exclusive economic zone
(1b) Australia contiguous zone
(1c) Australia territorial waters [already in OSM]


  1.  Coastal Waters (State/Territory Powers) Act 1980 - Australian Maritime 
Boundaries 2014a - 
Geodatabase:

(2a) Australia coastal waters limit

Any maritime boundaries for Australia’s Antarctic territory claim will not be 
imported.

There are two EEZs provided by Geoscience Australia:
“NOTE: Two versions of the Exclusive Economic Zone (EEZ) are supplied to 
account for the discrepancy between Seas and Submerged Lands Act 1973. The 
Proclamation under section 10B (26/07/1994), and unratified Treaty between the 
Government of Australia and the Government of the Republic of Indonesia, 
establishing an Exclusive Economic Zone Boundary and Certain Seabed Boundaries 
(Perth, 14 march 1997) [1997] ATNIF 9 - (not yet in force). Although the 
proclamation remains in force, for many matters the limit modified by the 
action of the treaty is the limit that should be applied. This is the default 
depiction of Australia's EEZ.”
http://services.ga.gov.au/gis/rest/services/SSLA_1973_AMB2014a/MapServer

The 1997 treaty amended EEZ limit has been selected for import because, as 
mentioned above, it is the default depiction of Australia’s EEZ.

LICENSE
Both sources are licensed under Creative Commons Attribution 4.0 
International from Geoscience 
Australia

WAIVER/ATTRIBUTION
Geoscience 
waiver
 and 
attribution
  (ODbL compliant).

OSM DATA FILE:
https://1drv.ms/u/s!AhNsZYj9KZ5gp8gbgMMDbw780UWFww (will keep link active for 
about a month or so)

IMPORT TYPE
One-time import, manual integration using JOSM.

---DATA PREPARATION-

REDUCTION AND SIMPLIFICATION
Only the maritime boundaries mentioned above will be imported from the data 
sources.

Shapefiles have been simplified in QGIS (0.0001 simplification tolerance) to 
reduce the number of points, while maintaining good detail. Minimal or no 
distinguishable change in detail is observed at OSM zoom level 
14 and lower.

TAGGING AND RELATIONS
(1a)
-New relation in OSM:
alt_name=Australia (EEZ)
border_type=eez
boundary=maritime
maritime=yes
name=Australia (exclusive economic zone)
source:date=2017-06-24
source= Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
2014a, Perth Treaty 1997 amendment, Geoscience Australia.
type=boundary

(1b)
-New relation in OSM:
border_type=contiguous
boundary=maritime
maritime=yes
name=Australia (contiguous zone)
source:date=2017-06-24
source=Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
2014a, Geoscience Australia.
type=boundary

(1c)
-Will be integrated with the existing Australia 
relation in OSM. Only required 
for fixes to correct detail (such as around Lord Howe/Elizabeth reef). The 
following tags will be added on the maritime ways:
maritime=yes
description=Territorial sea boundary

The redundant tag (“note= generated from coastline+baseline segments”) will be 
removed from the ways when checked against this Geoscience data.

(2a)
-Will be integrated with existing 
state/territory
 relations. The most significant change will be that state/territory boundaries 
will be changed to match the coastal water limits instead of Australia’s 
territorial waters limit.
The following tags will be added on the maritime ways:
maritime=yes
description=Coastal waters boundary

CHANGESET TAG
When uploading, the following sources will be stated:
(1a,b,c) Seas and Submerged Lands Act 1973 - Australian Maritime Boundaries 
2014a, Geoscience Australia. 2017-06-24.
(2a) Coastal Waters (State/Territory Powers) Act 1980 - Australian Maritime 
Boundaries 2014a, Geoscience Australia. 2017-06-24.


---DATA MERGE WORKFLOW-
Working solo, will take several days or less due to lack of existing data and 
minimal conflation when importing.

WORKFLOW
*Download existing OSM boundaries with overpass API in JOSM for relevant areas.
*Merge data 

[Talk-cz] PhotoDB2 - licencovani, podminky pouziti

[Tom Ka]

Ahoj,

dal jsem dohromady a prokonzultoval s Janem Macurou a Mormegilem
podminky pouziti a licencovani PhotoDB2. Podivejte se prosim na

https://osm.fit.vutbr.cz/photodb2-dev/terms.php

a pokud mate nejake napady, komentare, pripominky, budu za ne vdecny.
Specialne se tyka autoru fotek, u kterych bude s podminkami vyzadovan
souhlas aby to bylo cele pravne nejak rozumne ukotvene (zatim ale nema
smysl cokoliv potvrzovat, je to vyvojova verze).

- Licenci jsem zatim jako nejvhodnejsi dle meho zkoumani napsal CC-BY
4.0, ale je to jedna z hlavnich veci k diskuzi
  * CC-XX 3.0 a starsi neresi databaze, neni tedy asi uplne vhodne
  * ODbL je vyrazne slozitejsi, mene overena v praxi, mimo OSM temer neznama
  * CC-BY nebo CC-BY-SA? (mozne "komercni" vyuziti napr. pro mapy.cz nebo KCT?)

- Cilem bylo to mit maximalne jednoduche pri pokryti zakladnich veci,
urcite to lze vyrazne prodlouzit a zeslozitit, ale to podle mne nicemu
nepomuze.

V okamziku, kdy nebudou zasadni pripominky, je vse technicky
pripraveno k preklopeni na osmap.cz a nasledne walley planuje vypnout
api.osm.cz.

Diky za pomoc. Tom.K.

___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-de] Layer mit Gemeindegrenzen

[wambacher]

Hi Markus

Am 03.09.2018 um 09:23 schrieb Markus:
> Ich habe also folgendes gemacht:
> - unten ausgewählt: json, levels, land, CLI
> - links ausgewählt:
>   Bayern (level 4)
>   und mit Rechtsklick "Select children":
>   alle level 5
>   alle level 6
>   alle level 8, bzw. bei VGem 7+8
>
> Aber wenn ich mehrere 8er auswähle, kommt die Fehlermeldung "too many.."
>
Genau deshalb hab ich ja "laut und deutlich" >*du musst das CLI
verwenden*< geschrieben. (CLI=Command Line Interface)

Du benutzt gerade das GUI (Graphical User Interface) und da ist das
Herunterladen von mehr als 60 (?) Grenzen bewusst gesperrt.

> Man braucht auch cURL, und einen clikey?
> Wo bekomme ich das und was mache ich dann damit?
> (Win 8.1)
mach das selbe "Spielchen" mit nur wenigen Grenzen und dann kommt der
Popup. Dass du gleich am Anfang "voll einsteigst", hab ich nicht
bedacht. . Dort steht der CLI-Key drin. Den URL musst du nur noch etwas
ändern, insb. selected=2145268 für Bayern und deinen CLI-Key einsetzen.
Ob der Script dann unter WIN8 läuft? Evtl musst du einige Apostrophe
ändern. WGET wird jedenfalls benötigt.

Wenns unter WIN nicht klappt, sag mir Bescheid. Dann schick ich dir das
Zeug per Mail, die ich dann natürlich kennen muss.

Gruss
walter
-- 
My projects:

Admin Boundaries of the World 
Missing Boundaries

Emergency Map 
Postal Code Map (Germany only) 
Fools (QA for zipcodes in Germany) 
Postcode Boundaries of Germany 
___
Talk-de mailing list
Talk-de@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-de

Re: [Talk-de] Layer mit Gemeindegrenzen

[wambacher]

Hi Markus

Am 03.09.2018 um 09:23 schrieb Markus:
> Ich habe also folgendes gemacht:
> - unten ausgewählt: json, levels, land, CLI
> - links ausgewählt:
>   Bayern (level 4)
>   und mit Rechtsklick "Select children":
>   alle level 5
>   alle level 6
>   alle level 8, bzw. bei VGem 7+8
>
> Aber wenn ich mehrere 8er auswähle, kommt die Fehlermeldung "too many.."
>
Genau deshalb hab ich ja "laut und deutlich" >*du musst das CLI
verwenden*< geschrieben. (CLI=Command Line Interface)

Du benutzt gerade das GUI (Graphical User Interface) und da ist das
Herunterladen von mehr als 60 (?) Grenzen bewusst gesperrt.

> Man braucht auch cURL, und einen clikey?
> Wo bekomme ich das und was mache ich dann damit?
> (Win 8.1)
mach das selbe "Spielchen" mit nur wenigen Grenzen und dann kommt der
Popup. Dass du gleich am Anfang "voll einsteigst", hab ich nicht
bedacht. . Dort steht der CLI-Key drin. Den URL musst du nur noch etwas
ändern, insb. selected=2145268 für Bayern und deinen CLI-Key einsetzen.
Ob der Script dann unter WIN8 läuft? Evtl musst du einige Apostrophe
ändern. WGET wird jedenfalls benötigt.

Wenns unter WIN nicht klappt, sag mir Bescheid. Dann schick ich dir das
Zeug per Mail, die ich dann natürlich kennen muss.

Gruss
walter
-- 
My projects:

Admin Boundaries of the World 
Missing Boundaries

Emergency Map 
Postal Code Map (Germany only) 
Fools (QA for zipcodes in Germany) 
Postcode Boundaries of Germany 
___
Talk-de mailing list
Talk-de@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-de

[OSM-talk-fr] Le site de l'association OSM-FR fait peau neuve

[François Lacombe]

Bonsoir à tous,

Cela avait été annoncé lors du dernier SOTM-Fr à Bordeaux en Juin dernier,
la nouvelle version du site web de l'association arrivait à maturité.
L'été a permis de faire les dernières finitions et elle a été mise en ligne
dans le courant du week-end.
https://www.openstreetmap.fr/

L'ergonomie a été complètement revue et une carte avec différents rendus a
été ajoutée à la page d'accueil.
L'accès aux informations utiles pour chacun est désormais plus facile, avec
de grandes rubriques telles que "Contribuer" ou "Utiliser" et un blog pour
partager vos expériences et les actualités nationales.
https://www.openstreetmap.fr/contribuer/
https://www.openstreetmap.fr/actualites/

En remerciant Noémie, Flora et Florian pour le développement et Jocelyn
pour l'administration et la bascule de ce week-end

Bonne consultation et à bientôt

François pour le CA de l'association
___
Talk-fr mailing list
Talk-fr@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-fr

Re: [Talk-cz] WeeklyOSM CZ 421

[Zdeněk Pražák]

díky za popis
-- Původní e-mail --
Od: Mirek Dlask 
Komu: OpenStreetMap Czech Republic 
Datum: 3. 9. 2018 8:25:34
Předmět: Re: [Talk-cz] WeeklyOSM CZ 421
"



Ahoj
V menu Mapové podklady -> Nastavení mapových podkladů  - klikni vpravo skoro
dole na +TMS 

zadej

2. URL https://osm.fit.vutbr.cz/strava/all/{zoom}/{x}/{y}.png
(https://osm.fit.vutbr.cz/strava/all/%7Bz%7D/%7Bx%7D/%7By%7D.png) 

3.  přiblížení 16 

5. vrstvu pojmenuj 




Pokud provozuješ neaktuální verzi JOSM bude asi v URL místo {zoom} {z}  
https://osm.fit.vutbr.cz/strava/all/{z}/{x}/{y}.png
(https://osm.fit.vutbr.cz/strava/all/%7Bz%7D/%7Bx%7D/%7By%7D.png) 







po 3. 9. 2018 v 8:01 odesílatel Zdeněk Pražák mailto:zpra...@seznam.cz)> napsal:

"

mohl bych poprosit o popis postupu jak to dostat do JOSM - co je třeba a kde
nastavit a co povolit

Děkuji

Pražák





út 28. 8. 2018 v 8:07 odesílatel Tom Ka mailto:tomas.kaspa...@gmail.com)> napsal:

"Pokud by byl zajem, muzu zkusit pridat jako vrstvu na osmap.cz
(http://osmap.cz) a
udelat vlastni kopii dat jako maji kluci na freemap.sk(http://freemap.sk) -
Martine, jak
resite aktualnost, nijak nebo jednou za cas rucne?

Bye

Dne 27. srpna 2018 21:21 Martin Ždila mailto:martin.zd...@freemap.sk)> napsal(a):
> On Mon, Aug 27, 2018 at 7:24 PM Milan Cerny mailto:milan...@centrum.cz)> wrote:
>>
>> Zaujal mě příspěvek o Strava heatmap pro mapování OSM na Slovensku. Dobrá
>> práce, jen škoda, že to neumí i celé ČR, jen kousek Moravy.
>> Uměl by někdo něco podobného i pro ČR? Je to hodně užitečný a přesný
zdroj
>> dat. S tím stávajícím do zoomu 12 se moc pracovat nedá, 16 už je o něčem
>> jiném.
>
>
> Vyuzil som https://github.com/species/osm-tiledownloader
(https://github.com/species/osm-tiledownloader) plus prilozeny diff
>
> --
> Ing. Martin Ždila
> OZ Freemap Slovakia
> tel:+421-908-363-848
> mailto:martin.zd...@freemap.sk(mailto:martin.zd...@freemap.sk)
> http://www.freemap.sk/(http://www.freemap.sk/)
>
>
>
> ___
> Talk-cz mailing list
> Talk-cz@openstreetmap.org(mailto:Talk-cz@openstreetmap.org)
> https://lists.openstreetmap.org/listinfo/talk-cz
(https://lists.openstreetmap.org/listinfo/talk-cz)
> https://openstreetmap.cz/talkcz(https://openstreetmap.cz/talkcz)
>

___
Talk-cz mailing list
Talk-cz@openstreetmap.org(mailto:Talk-cz@openstreetmap.org)
https://lists.openstreetmap.org/listinfo/talk-cz
(https://lists.openstreetmap.org/listinfo/talk-cz)
https://openstreetmap.cz/talkcz(https://openstreetmap.cz/talkcz)
"
___
Talk-cz mailing list
Talk-cz@openstreetmap.org(mailto:Talk-cz@openstreetmap.org)
https://lists.openstreetmap.org/listinfo/talk-cz
(https://lists.openstreetmap.org/listinfo/talk-cz)
https://openstreetmap.cz/talkcz(https://openstreetmap.cz/talkcz)
"
___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz
"___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-cz] PhotoDB

[Tom Ka]

OK, sum na moji strane v diskuzi s Mormegilem. CC0 se tyka wikidat.

Bye

Dne 31. srpna 2018 22:15 Jan Macura  napsal(a):
> Ahoj,
>
> On Fri, 31 Aug 2018 at 18:29, Tom Ka  wrote:
>>
>> Ahoj, nahravani na Commons zrejme nebude rozumne realizovatelne. Pokud
>> je mi zatim znamo, Commons musi mit CC0, coz zase neni idealni pro
>> PhotoDB2, i kdyz o licenci pro PhotoDB2 jeste bude zrejme diskuze.
>
>
> vůbec ne. Na Commons má každý soubor licenci individuálně. Určitě by se
> nechala vytáhnout nějaká statistika, ale většina zřejmě pod bude CC-BY-SA,
> což je defaultní (a nejrestriktivnější) možnost. Potom bych tipnul CC-BY,
> PD-GOV a pak ostatní...
>
> H.
>
> ___
> Talk-cz mailing list
> Talk-cz@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-cz
> https://openstreetmap.cz/talkcz
>

___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

[Talk-cz] prague mapathon msf

[Jakub Axman]

Dobrý den,

informuji, že další mapathon Lékařů bez hranic se uskuteční ve čtvrtek 13.
září v rámci evakuační centrum HZS v areálu PN Bohnice. Koncem září bude
ještě pravidelný mapathon, tentokrát v úterý 25. září od 18 hodin v Wine
Food Marketu na Smíchově.

Hezký den,
Jakub Axman

m / jakub.ax...@gmail.com
t / + 420 776 616 889
w / www.budejovickymajales.cz
___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-it] foss4g-it2019 a PAdova

[Matteo Zaffonato]

Se serve una mano per organizzare qualcosa sono a disposizione insieme al
resto del coordinamento Wikimedia Italia per il Veneto.

Ciao
Matteo

Il sab 1 set 2018, 12:45 Luca Delucchi  ha scritto:

>
>
> Il sab 1 set 2018, 10:10 Matteo Zaffonato  ha scritto:
>
>> Per il Mapping party ci siamo mossi durante quest'anno con una
>> presentazione sulla mappatura della ciclabilità in collaborazione con
>> Volket ed una sulla mappatura dell'accessibilità. Se dite si può procedere
>> con una delle due.
>>
>> Altrimenti c'era una persona dell'Università che era molto interessata
>> alla mappatura di un nuovo quartiere coinvolgendo anche i residenti. Posso
>> sentirlo al rientro dalle ferie.
>>
>
> interessante.
>
>>
>> @Alessandro: c'è già un'idea per la sede dell'evento? In caso posso
>> sentire i contatti che il gruppo Wikimedia Veneto ha all'interno
>> dell'Università.
>>
>
> Si si, siamo ospiti del DICEA.
>
>>
>> Ciao
>> Matteo
>>
>
> Ciao
> Luca
>
>> ___
> Talk-it mailing list
> Talk-it@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-it
>
___
Talk-it mailing list
Talk-it@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-it

Re: [Talk-cz] WeeklyOSM CZ 421

[majka]

Osobně bych nechala jen hot - je nejdetailnější. Navíc pro mapování mají
větší smysl jen ta největší přiblížení, tedy i z toho důvodu. Přínos další
varianty takhle velké mapy podle mě není takový, aby to tu dodatečnou
velikost odůvodňovalo.

Majka

On Mon, 3 Sep 2018 at 12:16, Tom Ka  wrote:

> Tak jeste info - redblue/all mi sice dovoli stahovat zoom 16 ale
> dlazdice jsou prazdne (pruhledne png). Max. zoom je tedy 15. Hot
> vrstva pro 16 funguje zda se v poradku. Ma tedy bluered nejaky smysl
> nebo mohu zrusit?
>
> Diky
>
> Dne 3. září 2018 11:29 Tom Ka  napsal(a):
> > Diky, jen upresnim ze redblue/all (puvodni) i nove stahovana hot/all
> > maji komplet zoom 15 a jsou nekde +- v pulce zoomu 16. Zatim jsem
> > nezaznamenal zadnou reakci/ pozadavek na ty samostatne vrstvy - pro
> > info jedna vrstva je cca 25-30GB.
> >
> > Bye
> >
> > Dne 3. září 2018 8:22 Mirek Dlask  napsal(a):
> >> Ahoj
> >> V menu Mapové podklady -> Nastavení mapových podkladů  - klikni vpravo
> skoro
> >> dole na +TMS
> >> zadej
> >> 2. URL https://osm.fit.vutbr.cz/strava/all/{zoom}/{x}/{y}.png
> >> 3.  přiblížení 16
> >> 5. vrstvu pojmenuj
> >>
> >> Pokud provozuješ neaktuální verzi JOSM bude asi v URL místo {zoom} {z}
> >> https://osm.fit.vutbr.cz/strava/all/{z}/{x}/{y}.png
> >>
> >> po 3. 9. 2018 v 8:01 odesílatel Zdeněk Pražák 
> napsal:
> >>>
> >>> mohl bych poprosit o popis postupu jak to dostat do JOSM - co je třeba
> a
> >>> kde nastavit a co povolit
> >>> Děkuji
> >>> Pražák
> >>>
> >>> út 28. 8. 2018 v 8:07 odesílatel Tom Ka 
> napsal:
> 
>  Pokud by byl zajem, muzu zkusit pridat jako vrstvu na osmap.cz a
>  udelat vlastni kopii dat jako maji kluci na freemap.sk - Martine, jak
>  resite aktualnost, nijak nebo jednou za cas rucne?
> 
>  Bye
> 
>  Dne 27. srpna 2018 21:21 Martin Ždila 
>  napsal(a):
>  > On Mon, Aug 27, 2018 at 7:24 PM Milan Cerny 
>  > wrote:
>  >>
>  >> Zaujal mě příspěvek o Strava heatmap pro mapování OSM na Slovensku.
>  >> Dobrá
>  >> práce, jen škoda, že to neumí i celé ČR, jen kousek Moravy.
>  >> Uměl by někdo něco podobného i pro ČR? Je to hodně užitečný a
> přesný
>  >> zdroj
>  >> dat. S tím stávajícím do zoomu 12 se moc pracovat nedá, 16 už je o
>  >> něčem
>  >> jiném.
>  >
>  >
>  > Vyuzil som https://github.com/species/osm-tiledownloader plus
> prilozeny
>  > diff
>  >
>  > --
>  > Ing. Martin Ždila
>  > OZ Freemap Slovakia
>  > tel:+421-908-363-848
>  > mailto:martin.zd...@freemap.sk
>  > http://www.freemap.sk/
>  >
>  >
>  >
>  > ___
>  > Talk-cz mailing list
>  > Talk-cz@openstreetmap.org
>  > https://lists.openstreetmap.org/listinfo/talk-cz
>  > https://openstreetmap.cz/talkcz
>  >
> 
>  ___
>  Talk-cz mailing list
>  Talk-cz@openstreetmap.org
>  https://lists.openstreetmap.org/listinfo/talk-cz
>  https://openstreetmap.cz/talkcz
> >>>
> >>> ___
> >>> Talk-cz mailing list
> >>> Talk-cz@openstreetmap.org
> >>> https://lists.openstreetmap.org/listinfo/talk-cz
> >>> https://openstreetmap.cz/talkcz
> >>
> >>
> >> ___
> >> Talk-cz mailing list
> >> Talk-cz@openstreetmap.org
> >> https://lists.openstreetmap.org/listinfo/talk-cz
> >> https://openstreetmap.cz/talkcz
> >>
>
> ___
> Talk-cz mailing list
> Talk-cz@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-cz
> https://openstreetmap.cz/talkcz
>
___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-cz] WeeklyOSM CZ 421

[Tom Ka]

Tak jeste info - redblue/all mi sice dovoli stahovat zoom 16 ale
dlazdice jsou prazdne (pruhledne png). Max. zoom je tedy 15. Hot
vrstva pro 16 funguje zda se v poradku. Ma tedy bluered nejaky smysl
nebo mohu zrusit?

Diky

Dne 3. září 2018 11:29 Tom Ka  napsal(a):
> Diky, jen upresnim ze redblue/all (puvodni) i nove stahovana hot/all
> maji komplet zoom 15 a jsou nekde +- v pulce zoomu 16. Zatim jsem
> nezaznamenal zadnou reakci/ pozadavek na ty samostatne vrstvy - pro
> info jedna vrstva je cca 25-30GB.
>
> Bye
>
> Dne 3. září 2018 8:22 Mirek Dlask  napsal(a):
>> Ahoj
>> V menu Mapové podklady -> Nastavení mapových podkladů  - klikni vpravo skoro
>> dole na +TMS
>> zadej
>> 2. URL https://osm.fit.vutbr.cz/strava/all/{zoom}/{x}/{y}.png
>> 3.  přiblížení 16
>> 5. vrstvu pojmenuj
>>
>> Pokud provozuješ neaktuální verzi JOSM bude asi v URL místo {zoom} {z}
>> https://osm.fit.vutbr.cz/strava/all/{z}/{x}/{y}.png
>>
>> po 3. 9. 2018 v 8:01 odesílatel Zdeněk Pražák  napsal:
>>>
>>> mohl bych poprosit o popis postupu jak to dostat do JOSM - co je třeba a
>>> kde nastavit a co povolit
>>> Děkuji
>>> Pražák
>>>
>>> út 28. 8. 2018 v 8:07 odesílatel Tom Ka  napsal:

 Pokud by byl zajem, muzu zkusit pridat jako vrstvu na osmap.cz a
 udelat vlastni kopii dat jako maji kluci na freemap.sk - Martine, jak
 resite aktualnost, nijak nebo jednou za cas rucne?

 Bye

 Dne 27. srpna 2018 21:21 Martin Ždila 
 napsal(a):
 > On Mon, Aug 27, 2018 at 7:24 PM Milan Cerny 
 > wrote:
 >>
 >> Zaujal mě příspěvek o Strava heatmap pro mapování OSM na Slovensku.
 >> Dobrá
 >> práce, jen škoda, že to neumí i celé ČR, jen kousek Moravy.
 >> Uměl by někdo něco podobného i pro ČR? Je to hodně užitečný a přesný
 >> zdroj
 >> dat. S tím stávajícím do zoomu 12 se moc pracovat nedá, 16 už je o
 >> něčem
 >> jiném.
 >
 >
 > Vyuzil som https://github.com/species/osm-tiledownloader plus prilozeny
 > diff
 >
 > --
 > Ing. Martin Ždila
 > OZ Freemap Slovakia
 > tel:+421-908-363-848
 > mailto:martin.zd...@freemap.sk
 > http://www.freemap.sk/
 >
 >
 >
 > ___
 > Talk-cz mailing list
 > Talk-cz@openstreetmap.org
 > https://lists.openstreetmap.org/listinfo/talk-cz
 > https://openstreetmap.cz/talkcz
 >

 ___
 Talk-cz mailing list
 Talk-cz@openstreetmap.org
 https://lists.openstreetmap.org/listinfo/talk-cz
 https://openstreetmap.cz/talkcz
>>>
>>> ___
>>> Talk-cz mailing list
>>> Talk-cz@openstreetmap.org
>>> https://lists.openstreetmap.org/listinfo/talk-cz
>>> https://openstreetmap.cz/talkcz
>>
>>
>> ___
>> Talk-cz mailing list
>> Talk-cz@openstreetmap.org
>> https://lists.openstreetmap.org/listinfo/talk-cz
>> https://openstreetmap.cz/talkcz
>>

___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-de] Relation in verschiedenen Formaten herunterladen

[Hartmut Holzgraefe]

On 03.09.2018 10:17, Markus wrote:
> Wenn ich die ID einer Relation habe,
> Wo/wie kann ich die Daten in verschiedenen Formaten herunterladen?
> (gpx, shape, json, svg, ...
> 
> Beispiel:
> Erlangen, ID=62403
> Simmelsdorfer Rundwanderweg Rot 3, ID=969263

für Wanderwege ist es einfach:

https://hiking.waymarkedtrails.org/api/details/relation/969263/gpx

-- 
hartmut

___
Talk-de mailing list
Talk-de@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-de

Re: [Talk-cz] WeeklyOSM CZ 421

[Tom Ka]

Diky, jen upresnim ze redblue/all (puvodni) i nove stahovana hot/all
maji komplet zoom 15 a jsou nekde +- v pulce zoomu 16. Zatim jsem
nezaznamenal zadnou reakci/ pozadavek na ty samostatne vrstvy - pro
info jedna vrstva je cca 25-30GB.

Bye

Dne 3. září 2018 8:22 Mirek Dlask  napsal(a):
> Ahoj
> V menu Mapové podklady -> Nastavení mapových podkladů  - klikni vpravo skoro
> dole na +TMS
> zadej
> 2. URL https://osm.fit.vutbr.cz/strava/all/{zoom}/{x}/{y}.png
> 3.  přiblížení 16
> 5. vrstvu pojmenuj
>
> Pokud provozuješ neaktuální verzi JOSM bude asi v URL místo {zoom} {z}
> https://osm.fit.vutbr.cz/strava/all/{z}/{x}/{y}.png
>
> po 3. 9. 2018 v 8:01 odesílatel Zdeněk Pražák  napsal:
>>
>> mohl bych poprosit o popis postupu jak to dostat do JOSM - co je třeba a
>> kde nastavit a co povolit
>> Děkuji
>> Pražák
>>
>> út 28. 8. 2018 v 8:07 odesílatel Tom Ka  napsal:
>>>
>>> Pokud by byl zajem, muzu zkusit pridat jako vrstvu na osmap.cz a
>>> udelat vlastni kopii dat jako maji kluci na freemap.sk - Martine, jak
>>> resite aktualnost, nijak nebo jednou za cas rucne?
>>>
>>> Bye
>>>
>>> Dne 27. srpna 2018 21:21 Martin Ždila 
>>> napsal(a):
>>> > On Mon, Aug 27, 2018 at 7:24 PM Milan Cerny 
>>> > wrote:
>>> >>
>>> >> Zaujal mě příspěvek o Strava heatmap pro mapování OSM na Slovensku.
>>> >> Dobrá
>>> >> práce, jen škoda, že to neumí i celé ČR, jen kousek Moravy.
>>> >> Uměl by někdo něco podobného i pro ČR? Je to hodně užitečný a přesný
>>> >> zdroj
>>> >> dat. S tím stávajícím do zoomu 12 se moc pracovat nedá, 16 už je o
>>> >> něčem
>>> >> jiném.
>>> >
>>> >
>>> > Vyuzil som https://github.com/species/osm-tiledownloader plus prilozeny
>>> > diff
>>> >
>>> > --
>>> > Ing. Martin Ždila
>>> > OZ Freemap Slovakia
>>> > tel:+421-908-363-848
>>> > mailto:martin.zd...@freemap.sk
>>> > http://www.freemap.sk/
>>> >
>>> >
>>> >
>>> > ___
>>> > Talk-cz mailing list
>>> > Talk-cz@openstreetmap.org
>>> > https://lists.openstreetmap.org/listinfo/talk-cz
>>> > https://openstreetmap.cz/talkcz
>>> >
>>>
>>> ___
>>> Talk-cz mailing list
>>> Talk-cz@openstreetmap.org
>>> https://lists.openstreetmap.org/listinfo/talk-cz
>>> https://openstreetmap.cz/talkcz
>>
>> ___
>> Talk-cz mailing list
>> Talk-cz@openstreetmap.org
>> https://lists.openstreetmap.org/listinfo/talk-cz
>> https://openstreetmap.cz/talkcz
>
>
> ___
> Talk-cz mailing list
> Talk-cz@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-cz
> https://openstreetmap.cz/talkcz
>

___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

[Talk-de] Relation in verschiedenen Formaten herunterladen

[Markus]

Wenn ich die ID einer Relation habe,
Wo/wie kann ich die Daten in verschiedenen Formaten herunterladen?
(gpx, shape, json, svg, ...

Beispiel:
Erlangen, ID=62403
Simmelsdorfer Rundwanderweg Rot 3, ID=969263

Gruss, Markus

___
Talk-de mailing list
Talk-de@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-de

Re: [Talk-de] Layer mit Gemeindegrenzen

[Markus]

Hallo Walter,

> Hier kannst du dir Bayern herunterladen:
> https://wambachers-osm.website/boundaries
> 
> Dafür musst du das CLI verwenden: 
> https://wambachers-osm.website/index.php/projekte/internationale-administrative-grenzen/boundaries-map-4-3-german

Danke für die Doku :-)

Ich habe also folgendes gemacht:
- unten ausgewählt: json, levels, land, CLI
- links ausgewählt:
  Bayern (level 4)
  und mit Rechtsklick "Select children":
  alle level 5
  alle level 6
  alle level 8, bzw. bei VGem 7+8

Aber wenn ich mehrere 8er auswähle, kommt die Fehlermeldung "too many.."

Und wenn ich dann ("too many" lässt sich nicht wegklicken) auf Export
klicke (um die URL zum Export zu bekommen? oder gleich die Json?),
passiert nichts.

In der Doku steht "Es erscheint ein Popup, der die Befehlszeile anzeigt,
die für die Benutzung des CLI notwendig ist. Einfach Copy/Paste machen
und damit einen Script erzeugen", aber ich sehe kein Popup.
Und wahrscheinlich wäre ich auch mit "Skript erzeugen" überfordert.

Man braucht auch cURL, und einen clikey?
Wo bekomme ich das und was mache ich dann damit?
(Win 8.1)

Wie mache ich es richtig?

Mit herzlichem Gruss,
Markus

___
Talk-de mailing list
Talk-de@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-de

Re: [Talk-cz] maperská minirecenze MI 8

[Jan Macura]

Ahoj

On Thu, 30 Aug 2018 at 13:15, Pavel Machek  wrote:

> Tady je o tom celkem podrobny povidani:
> https://www.youtube.com/watch?v=vywGgSrGODU .
>

To video je zajímavý. Mluví se tam o fázových měřeních v mobilních
telefonech. To je něco jako malý zázrak a ta 30 cm přesnost v tomhle světle
najednou vypadá dosažitelně.

H.
___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-at] Quantität vor Qualität beim BEV-Adressimport?

[various]

Also insgesamt bin ich gegen einen Revert und für eine zumindest kurze Sperre.

Warum gegen Revert: 
Er hat viel eingetragen und auch viele korrekte Sachen bzw. SEHR viele korrekte 
Adressen eingetragen. Das steht außer Frage. Dabei sind einer Meinung nach 
leider auch einige vermeidbare Fehler dabei - vor allem, wenn er das so sorgsam 
macht, wie er behauptet.

Warum für Sperre:
Weil er sich dagegen wehrt Fehler zu beheben. Inzwischen zumindest teilweise 
und hin und wieder gemacht. Bis der Fehler behoben wird, ist allerdings oft 
eine lange Diskussion notwendig.
Weil er jede Kritik als Beleidigung sieht, wodurch alles in eine Diskussion 
ausartet.
Weil er bei Kritik von irgendwoher auch ständig mit irgendwelche 
Verschwörungstheorien ankommt. Im Forum, auf der Mailingliste, etc. 
Weil er einfach einen Import angefangen hat, ohne die Regeln für Importe zu 
beachten und auch anfangs bestritten hat, dass er einen Import macht. (Ich 
vermute, im den Prozess für den Import zu umgehen.)
Für einige dieser Dinge lassen sich wohl auch genügen Changesets mit 
Diskussionen finden - auch einige, bei denen er wohl auch etwas beheben sollte. 
Und nicht mit dem Kommentar "Mach ich dann nachher..." abtun. 

Meine Meinung. 
Grüße

> Marcus MERIGHI  hat am 3. September 2018 um 08:53 
> geschrieben:
> 
> 
> Morgen!
> 
> emga...@gmail.com (emga), 2018.09.03 (Mon) 00:20 (CEST):
> > > Am 31.08.2018 um 14:30 schrieb Rudolf Mayer :
> > > Robert Kaiser wrote on 31/08/18 14:15:
> > >> vari...@mailbox.org schrieb:
> > >>> Einen kompletten Revert halte ich für unsinnig, trotz aller Fehler
> > >>> und persönlicher, äh, unstimmigkeiten, bringen die ganzen
> > >>> Adressen, die er einträgt einen großen Mehrwert, imho.
> > >> Das Problem ist, dass ohne Revert er die Praxis einfach so weiter
> > >> führt 
> > > 
> > > Ich glaube auch, dass hier ein revert angebracht wäre.
> > 
> > Das Problem ist die Mailingliste ist gerade ein bisschen langsam
> 
> Nicht die Mailingliste, sondern deren Benutzer. E-Mails bewegen sich in
> der Regel recht schnell :-)
> 
> > dafür, diese Mappingmuster ist schon sein Monaten im Gange, mal
> > weniger auffällig mal mehr, nur so als Anmerkung 
> 
> Warum diese Anmerkung erst jetzt?
> 
> > Falsch ist es von der Durchführung, die Daten sind aber (großteils)
> > richtig. Schwer zu beurteilen. Wenn man es jetzt revertet setzt man
> > große Teile ATs gehörig zurück, und die eingetragene Information kommt
> > so schnell nicht wieder obwohl sie jetzt korrekt vor liegen würde.
> 
> Wenn mir jemand auf den Kopf sch, dann haengt meine Reaktion nicht
> davon ab, ob der Haufen huebsch oder haesslich ist; es geht dann mehr um
> die Aktion an sich :-)
> 
> Der Typ, um den es geht, hat schon jede Menge Haeufchen verteilt, ueber
> deren Qualitaet man gar nicht nachdenken sollte:
> 
> Weil der soziale Prozess nicht hinhaut. Weil er auf die Meinung anderer
> pfeift. Weil er Bloedsinn redet. Weil er nicht mal versteht, was die
> anderen sagen. Indem er seine Mantras einfach immer wieder ablaesst, ist
> er Politiker, nicht Techniker.
> 
> Sein Ziel sind Kartendaten, die OSM-community ist sein Vehikel dazu.
> Wenn dieses Vehikel nicht in seinem Sinne funktioniert, dann pfeift er
> halt d'rauf. 
> 
> Ich denke dass sich die Community wehren muss (Revert und Sperre).
> 
> Marcus
> 
> ___
> Talk-at mailing list
> Talk-at@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-at

___
Talk-at mailing list
Talk-at@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-at

Re: [Talk-at] Quantität vor Qualität beim BEV-Adressimport?

[Marcus MERIGHI]

Morgen!

emga...@gmail.com (emga), 2018.09.03 (Mon) 00:20 (CEST):
> > Am 31.08.2018 um 14:30 schrieb Rudolf Mayer :
> > Robert Kaiser wrote on 31/08/18 14:15:
> >> vari...@mailbox.org schrieb:
> >>> Einen kompletten Revert halte ich für unsinnig, trotz aller Fehler
> >>> und persönlicher, äh, unstimmigkeiten, bringen die ganzen
> >>> Adressen, die er einträgt einen großen Mehrwert, imho.
> >> Das Problem ist, dass ohne Revert er die Praxis einfach so weiter
> >> führt 
> > 
> > Ich glaube auch, dass hier ein revert angebracht wäre.
> 
> Das Problem ist die Mailingliste ist gerade ein bisschen langsam

Nicht die Mailingliste, sondern deren Benutzer. E-Mails bewegen sich in
der Regel recht schnell :-)

> dafür, diese Mappingmuster ist schon sein Monaten im Gange, mal
> weniger auffällig mal mehr, nur so als Anmerkung 

Warum diese Anmerkung erst jetzt?

> Falsch ist es von der Durchführung, die Daten sind aber (großteils)
> richtig. Schwer zu beurteilen. Wenn man es jetzt revertet setzt man
> große Teile ATs gehörig zurück, und die eingetragene Information kommt
> so schnell nicht wieder obwohl sie jetzt korrekt vor liegen würde.

Wenn mir jemand auf den Kopf sch, dann haengt meine Reaktion nicht
davon ab, ob der Haufen huebsch oder haesslich ist; es geht dann mehr um
die Aktion an sich :-)

Der Typ, um den es geht, hat schon jede Menge Haeufchen verteilt, ueber
deren Qualitaet man gar nicht nachdenken sollte:

Weil der soziale Prozess nicht hinhaut. Weil er auf die Meinung anderer
pfeift. Weil er Bloedsinn redet. Weil er nicht mal versteht, was die
anderen sagen. Indem er seine Mantras einfach immer wieder ablaesst, ist
er Politiker, nicht Techniker.

Sein Ziel sind Kartendaten, die OSM-community ist sein Vehikel dazu.
Wenn dieses Vehikel nicht in seinem Sinne funktioniert, dann pfeift er
halt d'rauf. 

Ich denke dass sich die Community wehren muss (Revert und Sperre).

Marcus

___
Talk-at mailing list
Talk-at@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-at

Re: [Talk-cz] WeeklyOSM CZ 421

[Mirek Dlask]

Ahoj
V menu Mapové podklady -> Nastavení mapových podkladů  - klikni vpravo
skoro dole na +TMS
zadej
2. URL https://osm.fit.vutbr.cz/strava/all/{zoom}/{x}/{y}.png

3.  přiblížení 16
5. vrstvu pojmenuj

Pokud provozuješ neaktuální verzi JOSM bude asi v URL místo {zoom} {z}
https://osm.fit.vutbr.cz/strava/all/{z}/{x}/{y}.png

po 3. 9. 2018 v 8:01 odesílatel Zdeněk Pražák  napsal:

> mohl bych poprosit o popis postupu jak to dostat do JOSM - co je třeba a
> kde nastavit a co povolit
> Děkuji
> Pražák
>
> út 28. 8. 2018 v 8:07 odesílatel Tom Ka  napsal:
>
>> Pokud by byl zajem, muzu zkusit pridat jako vrstvu na osmap.cz a
>> udelat vlastni kopii dat jako maji kluci na freemap.sk - Martine, jak
>> resite aktualnost, nijak nebo jednou za cas rucne?
>>
>> Bye
>>
>> Dne 27. srpna 2018 21:21 Martin Ždila 
>> napsal(a):
>> > On Mon, Aug 27, 2018 at 7:24 PM Milan Cerny 
>> wrote:
>> >>
>> >> Zaujal mě příspěvek o Strava heatmap pro mapování OSM na Slovensku.
>> Dobrá
>> >> práce, jen škoda, že to neumí i celé ČR, jen kousek Moravy.
>> >> Uměl by někdo něco podobného i pro ČR? Je to hodně užitečný a přesný
>> zdroj
>> >> dat. S tím stávajícím do zoomu 12 se moc pracovat nedá, 16 už je o
>> něčem
>> >> jiném.
>> >
>> >
>> > Vyuzil som https://github.com/species/osm-tiledownloader plus
>> prilozeny diff
>> >
>> > --
>> > Ing. Martin Ždila
>> > OZ Freemap Slovakia
>> > tel:+421-908-363-848
>> > mailto:martin.zd...@freemap.sk
>> > http://www.freemap.sk/
>> >
>> >
>> >
>> > ___
>> > Talk-cz mailing list
>> > Talk-cz@openstreetmap.org
>> > https://lists.openstreetmap.org/listinfo/talk-cz
>> > https://openstreetmap.cz/talkcz
>> >
>>
>> ___
>> Talk-cz mailing list
>> Talk-cz@openstreetmap.org
>> https://lists.openstreetmap.org/listinfo/talk-cz
>> https://openstreetmap.cz/talkcz
>>
> ___
> Talk-cz mailing list
> Talk-cz@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-cz
> https://openstreetmap.cz/talkcz
>
___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz

Re: [Talk-cz] WeeklyOSM CZ 421

[Zdeněk Pražák]

mohl bych poprosit o popis postupu jak to dostat do JOSM - co je třeba a
kde nastavit a co povolit
Děkuji
Pražák

út 28. 8. 2018 v 8:07 odesílatel Tom Ka  napsal:

> Pokud by byl zajem, muzu zkusit pridat jako vrstvu na osmap.cz a
> udelat vlastni kopii dat jako maji kluci na freemap.sk - Martine, jak
> resite aktualnost, nijak nebo jednou za cas rucne?
>
> Bye
>
> Dne 27. srpna 2018 21:21 Martin Ždila  napsal(a):
> > On Mon, Aug 27, 2018 at 7:24 PM Milan Cerny  wrote:
> >>
> >> Zaujal mě příspěvek o Strava heatmap pro mapování OSM na Slovensku.
> Dobrá
> >> práce, jen škoda, že to neumí i celé ČR, jen kousek Moravy.
> >> Uměl by někdo něco podobného i pro ČR? Je to hodně užitečný a přesný
> zdroj
> >> dat. S tím stávajícím do zoomu 12 se moc pracovat nedá, 16 už je o něčem
> >> jiném.
> >
> >
> > Vyuzil som https://github.com/species/osm-tiledownloader plus prilozeny
> diff
> >
> > --
> > Ing. Martin Ždila
> > OZ Freemap Slovakia
> > tel:+421-908-363-848
> > mailto:martin.zd...@freemap.sk
> > http://www.freemap.sk/
> >
> >
> >
> > ___
> > Talk-cz mailing list
> > Talk-cz@openstreetmap.org
> > https://lists.openstreetmap.org/listinfo/talk-cz
> > https://openstreetmap.cz/talkcz
> >
>
> ___
> Talk-cz mailing list
> Talk-cz@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-cz
> https://openstreetmap.cz/talkcz
>
___
Talk-cz mailing list
Talk-cz@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-cz
https://openstreetmap.cz/talkcz