Re: Weather or not issue
I love this explaination. Perfect example of using an orange. Changes in latitudes and changes in attitudes anyone? -Original Message- From: David via Talk Sent: Monday, February 04, 2019 10:33 AM To: Window-Eyes Discussion List Cc: David Subject: Re: Weather or not issue Larry and the resst, I will spend a few minutes of your time, attempting to answer the question of yours, the way I understood your asking. How come, that every place on earth, can be refered to by a set of coordinates? First of all, we need to understand the terms Longitude, and Latitude. Are you a former sighted person, or still have a certain amount of eye-sight to lean on, this might be basic for you. For those of you who grew up with no sight, geography might be one of the classes where things sometimes got a bit too simplified. So let's take a moment to explain the two terms. Imagine the earth, being a fruit, like an orange. You know, if you peel an orange, the inner fruit will consist of several wedges. Where all the wedges meet, on top, and in the bottom of the fruit - is where the poles are; North on top, South-pole (or Antartica) in the bottom. The lines between the individual wedges, which runs from one pole to the other, would now be your Longitudes. The fruit only holds a few longitudes, whereas the Earth has been divided into 360 longitudes. To make things easier for all who navigate, the longitude that runs through Greenwich - which I do hold is located in the UK - has been defined as Longitude 0. Any longitudes to the West (or left on the map), will have a negative longitude value. Any longitude to the East (or right) of the Greenwich, will be a positive longitude. When you, at the strict opposite side of the globe, have the positives and negatives meet, you are standing on the 180th longitude. By the way, that particular longitude - 180 - will also be known as the Date-line. This due to the fact, that is where the 24-hour day has been defined by human wisdom, to wrap. You will very likely be quite familiar with time-zones, and know that at given times throughout the day, you are sleeping, while other locations on Earth will be quite enjoying their lunch. OK, so that all took care of the longitudes. But what are latitudes? Get back to your orange. Place it so that the southern pole rests on the table, and the North-Pole is located on the very top point of the fruit. Take a pkiece of rope, and wrap it around the very belly of the fruit - that is, where the fruit is at its very thickest. This belt, is the Equator, running exactly mid-way between the two poles, and all around the globe. It is Latitude 0. Go ahead, and stretch new belts around your fruit, at exact intervals, until you reach the North-pole, or top of the fruit. You now should hav 180 such belts, and they are all positively numbered. Repeat the action, stretching belts around the southern hemosphere of your globe, again equally intervalling them, till you reach 180, which will be encircling the Southern Pole. All the southern latitude belts, will have negative numbers. Now that we have divided our globe into longitude lines, and latitude belts, it all forms a coordinate system. Easily understood, is the fact that we could refer to any place, which happen to be located at the very crossing point of any of these lines. But what about the places, which happen to be located anywhere in the areas BETWEEN the grid lines? How can we best refer to them? In the class of navigation, you would be talking about minutes, degrees and seconds. They are not completely linked to the time you can read on a clock, and I won't claim to understand these calculations too well. What's more, we do not need to fully understand. But let me tell you that modern technology has made it all a bit easier for us humans. How about we tell that you need to move a certain amount of steps, to get from one longitude to the next. And likewise, you need a given number of steps, to get from latitude A, to latitude B. (please note, I am not here refering to a walking step, but rather any predefined stretch we have to move in our coordinate system.) If now, we could have a way to tell which longitude and latitude to start from, and how many steps into the grid square between our coordinate lines we are actually positioned, it would make our location quite much more accurate. So how do we do that? If you noticed, when we were to fill in our Location coordinates, in the WeatherOrNot ini file, we used some decimal values. The main part of the value, the digits to the left of the decimal point, is the number that directly refers to the line number in our coordinate. A latitude value of 63.49420, will then refer to the latitude number 63 - counted from the Equator and to the North. The minor part of the decimal number - in our example 49420, will be how far - how many steps - further north of the 63rd latitude our position is. Again, a Longitude value of -59.12345, which
RE: Weather or not issue
Hi Butch, Thanks for the trick question. I had to use my Google Home Mini to make some enquiries, and, after that, and some contemplation, I get how Alaska is such a star. Smile Really, I should have known, living up here in Canada, where we have all kinds of points west and east, and, of course, north. Smiles Thanks again, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Butch Bussen via Talk Sent: February 5, 2019 1:44 AM To: David via Talk Cc: Butch Bussen Subject: Re: Weather or not issue Good explanation. We had a large globe at kansas school for the blind with raised lines for these lines as well as land and mountains and so forth. I'd love to have that globe, stood on a stand and was I'd guess 3 feet in diameter. Anyhow, as I recall, some times degrees are given in decimals and some times given in degrees minutes and seconds. If I remember right, one minute is one nautical mile which is about a mile and an eighth, Alexa says 6076 feet. This comes out 1.15 mile. This is true at the equater of course as if you go north or south the lines get closer. That is why our counties here in Kansas which are square have jogs in the roads called lines of corection. You can't lay out squares on a round globe. Here is a trivia question I won on the radio when I lived in Vegas. Name the most northern, eastern, western and southern states in the united states. Hawaii, of course is easy for the south one. For the north, it is Alaska for all three. The reason why is Alaska reaches furtherest longitude lines east and west of any other ease or west states. . Hope I haven't bored you all to much. 73 Butch WA0VJR Node 3148 Wallace, ks. ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Frod_hutton%2540hotmail.comdata=02%7C01%7C%7C5c37946a36dd41b85e8308d68b35608a%7C84df9e7fe9f640afb435%7C1%7C0%7C636849458694298912sdata=bzyg0OOavCVCYm9JZKTIqcgcm9AS9EguTPDH0uhVGj4%3Dreserved=0. For subscription options, visit https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C5c37946a36dd41b85e8308d68b35608a%7C84df9e7fe9f640afb435%7C1%7C0%7C636849458694298912sdata=06PP%2F4XQI9ljRLAodb66nIipx3ygju7VXVhQL%2BlOn78%3Dreserved=0 List archives can be found at https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C5c37946a36dd41b85e8308d68b35608a%7C84df9e7fe9f640afb435%7C1%7C0%7C636849458694298912sdata=PK9rq3LIxI8S6e1fiZlbuGRUEWTHWAxP8hFPbck3go4%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
Re: Weather or not issue
Good explanation. We had a large globe at kansas school for the blind with raised lines for these lines as well as land and mountains and so forth. I'd love to have that globe, stood on a stand and was I'd guess 3 feet in diameter. Anyhow, as I recall, some times degrees are given in decimals and some times given in degrees minutes and seconds. If I remember right, one minute is one nautical mile which is about a mile and an eighth, Alexa says 6076 feet. This comes out 1.15 mile. This is true at the equater of course as if you go north or south the lines get closer. That is why our counties here in Kansas which are square have jogs in the roads called lines of corection. You can't lay out squares on a round globe. Here is a trivia question I won on the radio when I lived in Vegas. Name the most northern, eastern, western and southern states in the united states. Hawaii, of course is easy for the south one. For the north, it is Alaska for all three. The reason why is Alaska reaches furtherest longitude lines east and west of any other ease or west states. . Hope I haven't bored you all to much. 73 Butch WA0VJR Node 3148 Wallace, ks. ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
Re: Weather or not issue
ing, might have been taken a totally different place in town, from where you sit at the moment. Weather conditions might be given specifically, or as an average of all the measurements reported for that city. It all will depend on exactly what weather service the app retrieves its info from. Just to round it all up, As modern technology develops, more and more decimals can be added to your positioning coordinate values - meaning smaller and smaller steps can be measured. It is not unlikely that you already would be able to give a quite accurate coordinate, for each room of your house. Just imagine that your bedroom is one decimal place closer to Equator, and that might be why you feel so warm and comfie in bed. Hahaha. Might sound like a joke, but reality is that given the right equipment, it is not totaly a dream to have such exact measurements. OK then, to what extent it will affect the temperature of your room, was a mere joke. Larry, I hope this helped you a bit. On the website I refered you to, they have a bit more info on the coordinates. And if you want even more details, try looking up online dictionaries, on the terms of Longitudes and Latitudes. David On 2/4/2019 4:11 PM, Larry Higgins via Talk wrote: Butch, I for one would appreciate seeing your weather.ini file. Sorry David, I haven't yet had time to look at your instructions, but plan to do so. I find it kind of interesting that if one fills in the zip code of a particular location, that it equates to the longitude or latitude of a particular city . Any ideas as to how this works, or is this a big "duh" on my part I could put up my weather ini file if that would help. Mine has 3 cities in it, but you could likely edit it. 73 Butch WA0VJR Node 3148 Wallace, ks. On Sun, 3 Feb 2019, Amanda Lee via Talk wrote: Thanks for this. I don't have a .ini from a prior installation just yet. I can follow this syntax just fine though and appreciate your being so thoughtful as to how to code these entries. I fortunately do have some of the coordinates for the points of interest I want to follow and thanks for sharing a more accessible site as well. Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of David via Talk Sent: Sunday, February 3, 2019 5:58 PM To: Window-Eyes Discussion List Cc: David Subject: Re: Weather or not issue OK, guys. This, is going to be a rather long message, so work your way through. I will try to share my findings on the issue you are having, with the WeatherOrNot app. These are based on some fooling around, and quick searchings on the net, so take them for what they are worth. I do have no clue exactly where, how or what the Weather app extracts its info, so you will have to do your own playing around. But when I tried the following steps, it at least gave me some results. Smiles. As someone suggested, please make it a habit of backing up any file before you modify it at all. OK, the first thing we need to know, is the Longitude and Latitude coordinates, in a decimal format, for the city or place you are trying to add. I did try a few webpages, and here is one that I found to be fairly easy to operate with WinEyes: https://www.latlong.net/ When opening the page, go to the first Edit box, and here enter your city. Like: Toronto, On for finding the city of Toronto in the province of Ontario, in Canada. Once you have typed your info, hit the Enter key. Please note, it seems that you will have to manually turn back on Browse Mode here. The page will now come up with its results. If it found the exact city or place, it will give you two edit boxes, right beneath the Find-button on the page. They will hold the necessary numbers, for the Longitude and Latitude. Copy and paste them into your ini file, as will be described below. In a few cases, I noticed the page came up with more than one choice for the city. They then were presented in a table, with a link for each city. You would simply choose the wanted link, hit Enter, and go to the text line, that gives you the coordinates. Copy and paste the given info into your ini file. How To Modify The Ini File? Now that we have found the needed info to direct the app, let's get to the real job. And, yes, it is a bit of typing to be done. We will go by it, step by step. First, open your WE control panel, and hit Alt-F, followed by the letter E. The user profile folder will open. Keep pressing the W, til you get to the file named: WeatherOrNot.ini , and hit Enter on it. It should open in something like Notepad. Please note, from here, it will be good to have your synth spell out all punctuations, and even Upper- and Lower-cased characters, as they are all important. In the ini file, scroll down to the line that reads [Locations] . Do NOT modify this line. Hit the End-key, to go to the end of the line, and then Hit Enter. You now have a blank line for entering your personalized info. What the app wants her
Re: Weather or not issue
Here is my ini file for what is worth. To get the file you want, go to the link below and hit enter on that file. http://www.shellworld.net/~butchb Butch Bussen 73 Butch WA0VJR Node 3148 Wallace, ks. On Mon, 4 Feb 2019, Larry Higgins via Talk wrote: Butch, I for one would appreciate seeing your weather.ini file. Sorry David, I haven't yet had time to look at your instructions, but plan to do so. I find it kind of interesting that if one fills in the zip code of a particular location, that it equates to the longitude or latitude of a particular city . Any ideas as to how this works, or is this a big "duh" on my part Who knows, maybe you covered this in your explanation already. Thanks so much though for your help from I'm sure all of us who wish to continue using this handy little app. Larry On 2/4/2019 7:48 AM, Butch Bussen via Talk wrote: I could put up my weather ini file if that would help. Mine has 3 cities in it, but you could likely edit it. 73 Butch WA0VJR Node 3148 Wallace, ks. On Sun, 3 Feb 2019, Amanda Lee via Talk wrote: > Thanks for this. I don't have a .ini from a prior installation just > yet. I can follow this syntax just fine though and appreciate your > being so thoughtful as to how to code these entries. I fortunately do > have some of the coordinates for the points of interest I want to follow > and thanks for sharing a more accessible site as well. > > Kind regards, > > Amanda Lee > > > -Original Message- > From: Talk > On > Behalf Of David via Talk > Sent: Sunday, February 3, 2019 5:58 PM > To: Window-Eyes Discussion List > Cc: David > Subject: Re: Weather or not issue > > OK, guys. > This, is going to be a rather long message, so work your way through. > I will try to share my findings on the issue you are having, with the > WeatherOrNot app. These are based on some fooling around, and quick > searchings on the net, so take them for what they are worth. I do have > no clue exactly where, how or what the Weather app extracts its info, so > you will have to do your own playing around. But when I tried the > following steps, it at least gave me some results. Smiles. > > As someone suggested, please make it a habit of backing up any file > before you modify it at all. > > OK, the first thing we need to know, is the Longitude and Latitude > coordinates, in a decimal format, for the city or place you are trying > to add. I did try a few webpages, and here is one that I found to be > fairly easy to operate with WinEyes: > https://www.latlong.net/ > > When opening the page, go to the first Edit box, and here enter your > city. Like: > Toronto, On > for finding the city of Toronto in the province of Ontario, in Canada. > Once you have typed your info, hit the Enter key. > Please note, it seems that you will have to manually turn back on Browse > Mode here. > > The page will now come up with its results. If it found the exact city > or place, it will give you two edit boxes, right beneath the Find-button > on the page. They will hold the necessary numbers, for the Longitude > and Latitude. Copy and paste them into your ini file, as will be > described below. > > In a few cases, I noticed the page came up with more than one choice for > the city. They then were presented in a table, with a link for each > city. You would simply choose the wanted link, hit Enter, and go to the > text line, that gives you the coordinates. Copy and paste the given info > into your ini file. > > How To Modify The Ini File? > Now that we have found the needed info to direct the app, let's get to > the real job. And, yes, it is a bit of typing to be done. We will go by > it, step by step. > > First, open your WE control panel, and hit Alt-F, followed by the letter > E. The user profile folder will open. > > Keep pressing the W, til you get to the file named: > WeatherOrNot.ini > , and hit Enter on it. It should open in something like Notepad. > Please note, from here, it will be good to have your synth spell out all > punctuations, and even Upper- and Lower-cased characters, as they are > all important. > > In the ini file, scroll down to the line that reads > [Locations] > . Do NOT modify this line. > > Hit the End-key, to go to the end of the line, and then Hit Enter. You > now have a blank line for entering your personalized info. > What the app wants here, is a section name, for your new location. To > keep our above example rolling, enter the following line. Or, modify it > to your personal location: > Toronto, Ontario=43.651890, -79.381710 . To brea
Re: Weather or not issue
tern part > of the town. For most villages and towns, it would have no impact on the > info we are looking for. Even for the biggest cities, it might not be > too much to bother, since the weather measurements we are receiving, > might have been taken a totally different place in town, from where you > sit at the moment. Weather conditions might be given specifically, or as > an average of all the measurements reported for that city. It all will > depend on exactly what weather service the app retrieves its info from. > > Just to round it all up, As modern technology develops, more and more > decimals can be added to your positioning coordinate values - meaning > smaller and smaller steps can be measured. It is not unlikely that you > already would be able to give a quite accurate coordinate, for each room > of your house. Just imagine that your bedroom is one decimal place > closer to Equator, and that might be why you feel so warm and comfie in > bed. Hahaha. Might sound like a joke, but reality is that given the > right equipment, it is not totaly a dream to have such exact > measurements. OK then, to what extent it will affect the temperature of > your room, was a mere joke. > > Larry, I hope this helped you a bit. On the website I refered you to, > they have a bit more info on the coordinates. And if you want even more > details, try looking up online dictionaries, on the terms of Longitudes > and Latitudes. > > David > > On 2/4/2019 4:11 PM, Larry Higgins via Talk wrote: >> Butch, >> >> >> I for one would appreciate seeing your weather.ini file. >> >> >> Sorry David, I haven't yet had time to look at your instructions, but >> plan to do so. >> >> >> I find it kind of interesting that if one fills in the zip code of a >> particular location, that it equates to the longitude or latitude of a >> particular city >> >> . Any ideas as to how this works, or is this a big "duh" on my part >> > >> Thanks so much though for your help from I'm sure all of us who wish >> to continue using this handy little app. >> >> >> Larry >> >> On 2/4/2019 7:48 AM, Butch Bussen via Talk wrote: >>> I could put up my weather ini file if that would help. Mine has 3 >>> cities in it, but you could likely edit it. >>> 73 >>> Butch >>> WA0VJR >>> Node 3148 >>> Wallace, ks. >>> >>> >>> On Sun, 3 Feb 2019, Amanda Lee via Talk wrote: >>> >>>> Thanks for this. I don't have a .ini from a prior installation just >>>> yet. I can follow this syntax just fine though and appreciate your >>>> being so thoughtful as to how to code these entries. I fortunately >>>> do have some of the coordinates for the points of interest I want to >>>> follow and thanks for sharing a more accessible site as well. >>>> >>>> Kind regards, >>>> >>>> Amanda Lee >>>> >>>> >>>> -Original Message- >>>> From: Talk >>>> >>>> On Behalf Of David via Talk >>>> Sent: Sunday, February 3, 2019 5:58 PM >>>> To: Window-Eyes Discussion List >>>> Cc: David >>>> Subject: Re: Weather or not issue >>>> >>>> OK, guys. >>>> This, is going to be a rather long message, so work your way through. >>>> I will try to share my findings on the issue you are having, with >>>> the WeatherOrNot app. These are based on some fooling around, and >>>> quick searchings on the net, so take them for what they are worth. I >>>> do have no clue exactly where, how or what the Weather app extracts >>>> its info, so you will have to do your own playing around. But when I >>>> tried the following steps, it at least gave me some results. Smiles. >>>> >>>> As someone suggested, please make it a habit of backing up any file >>>> before you modify it at all. >>>> >>>> OK, the first thing we need to know, is the Longitude and Latitude >>>> coordinates, in a decimal format, for the city or place you are >>>> trying to add. I did try a few webpages, and here is one that I >>>> found to be fairly easy to operate with WinEyes: >>>> https://www.latlong.net/ >>>> >>>> When opening the page, go to the first Edit box, and here enter your >>>> city. Like: >>>> Toronto, On >>>> for finding the city of Toronto in the province of Ontario, in Canada. >>>> Once you h
Re: Weather or not issue
Of course, if anyone could provide a sample file, it would be fine. As things stands, once you install the app, it will create its basic ini file. That is, it will set up its hotkeys. And the hotkeys, are the only part of the ini file, that I did not already cover in my description. All the rest of the file, however long it is, will be one or more locations, added as I described. In the Locations section, you need one location line holding the label and coordinates for each place you want included. You need one section, holding all settings, for each location. Following the steps outlined, you do not really need anything from anywhere else, but what the app already has set up for you. The rest will be for you to enter manually. Try opening your user profile folder, find the WeatherOrNot.ini file, and add on the lines in my earlier message. You will immediately get the weather conditions for the city of Toronto, Ontario in Canada. The example was, for the reason of being comprehendable, a real-life example. Again, should anyone want a copy of an already working ini file, let me know, and I could email it to you. Or, someone could put it on their dropbox or the like. Just you won't find any further secrets in there, except from what you already have. David On 2/4/2019 2:48 PM, Butch Bussen via Talk wrote: > I could put up my weather ini file if that would help. Mine has 3 > cities in it, but you could likely edit it. > 73 > Butch > WA0VJR > Node 3148 > Wallace, ks. > > > On Sun, 3 Feb 2019, Amanda Lee via Talk wrote: > >> Thanks for this. I don't have a .ini from a prior installation just >> yet. I can follow this syntax just fine though and appreciate your >> being so thoughtful as to how to code these entries. I fortunately >> do have some of the coordinates for the points of interest I want to >> follow and thanks for sharing a more accessible site as well. >> >> Kind regards, >> >> Amanda Lee >> >> >> -Original Message- >> From: Talk >> On >> Behalf Of David via Talk >> Sent: Sunday, February 3, 2019 5:58 PM >> To: Window-Eyes Discussion List >> Cc: David >> Subject: Re: Weather or not issue >> >> OK, guys. >> This, is going to be a rather long message, so work your way through. >> I will try to share my findings on the issue you are having, with the >> WeatherOrNot app. These are based on some fooling around, and quick >> searchings on the net, so take them for what they are worth. I do >> have no clue exactly where, how or what the Weather app extracts its >> info, so you will have to do your own playing around. But when I >> tried the following steps, it at least gave me some results. Smiles. >> >> As someone suggested, please make it a habit of backing up any file >> before you modify it at all. >> >> OK, the first thing we need to know, is the Longitude and Latitude >> coordinates, in a decimal format, for the city or place you are >> trying to add. I did try a few webpages, and here is one that I found >> to be fairly easy to operate with WinEyes: >> https://www.latlong.net/ >> >> When opening the page, go to the first Edit box, and here enter your >> city. Like: >> Toronto, On >> for finding the city of Toronto in the province of Ontario, in Canada. >> Once you have typed your info, hit the Enter key. >> Please note, it seems that you will have to manually turn back on >> Browse Mode here. >> >> The page will now come up with its results. If it found the exact >> city or place, it will give you two edit boxes, right beneath the >> Find-button on the page. They will hold the necessary numbers, for >> the Longitude and Latitude. Copy and paste them into your ini file, >> as will be described below. >> >> In a few cases, I noticed the page came up with more than one choice >> for the city. They then were presented in a table, with a link for >> each city. You would simply choose the wanted link, hit Enter, and go >> to the text line, that gives you the coordinates. Copy and paste the >> given info into your ini file. >> >> How To Modify The Ini File? >> Now that we have found the needed info to direct the app, let's get >> to the real job. And, yes, it is a bit of typing to be done. We will >> go by it, step by step. >> >> First, open your WE control panel, and hit Alt-F, followed by the >> letter E. The user profile folder will open. >> >> Keep pressing the W, til you get to the file named: >> WeatherOrNot.ini >> , and hit Enter on it. It should open in something like Notepad. >>
Re: Weather or not issue
positioning could we be? Well, basically it all depends on how exact our measuring equipment is. If you told the distance between two latitude belts to be something like 70 miles, or 112km, you could decide to only split that distance into 10 steps, and you only would need one decimal digit in your coordinat values. The backside of such few steps between each major line, would of course be a rather lacking accuracy in your telling where to find your treasure. With modern GPS and other navigation equipment, we are able to define even down to the ten thousandth step between each longitude as well as between each latitude. With such keen accuracy, we are able to get quite exactly to the point where we are located. With GPS - which slightly differs in their values, you can even get to the very address of any house or building on earth. Comes to our craving to know the weather condition in a city, we might not bother too much accuracy. As a matter of fact, I discovered that the WeatherOrNot app originally only had four decimals in its value, whereas the website I pointed you to, gives us values of 5 decimals. This difference matters little, when all we want to know, is the weather conditions in a given area. Simplifying it all, what if 4 decimals would give us the outer boarders of our town, whereas the 5 decimals will narrow it down to whether you are in the north, or in the western part of the town. For most villages and towns, it would have no impact on the info we are looking for. Even for the biggest cities, it might not be too much to bother, since the weather measurements we are receiving, might have been taken a totally different place in town, from where you sit at the moment. Weather conditions might be given specifically, or as an average of all the measurements reported for that city. It all will depend on exactly what weather service the app retrieves its info from. Just to round it all up, As modern technology develops, more and more decimals can be added to your positioning coordinate values - meaning smaller and smaller steps can be measured. It is not unlikely that you already would be able to give a quite accurate coordinate, for each room of your house. Just imagine that your bedroom is one decimal place closer to Equator, and that might be why you feel so warm and comfie in bed. Hahaha. Might sound like a joke, but reality is that given the right equipment, it is not totaly a dream to have such exact measurements. OK then, to what extent it will affect the temperature of your room, was a mere joke. Larry, I hope this helped you a bit. On the website I refered you to, they have a bit more info on the coordinates. And if you want even more details, try looking up online dictionaries, on the terms of Longitudes and Latitudes. David On 2/4/2019 4:11 PM, Larry Higgins via Talk wrote: > Butch, > > > I for one would appreciate seeing your weather.ini file. > > > Sorry David, I haven't yet had time to look at your instructions, but > plan to do so. > > > I find it kind of interesting that if one fills in the zip code of a > particular location, that it equates to the longitude or latitude of a > particular city > > . Any ideas as to how this works, or is this a big "duh" on my part > > Thanks so much though for your help from I'm sure all of us who wish > to continue using this handy little app. > > > Larry > > On 2/4/2019 7:48 AM, Butch Bussen via Talk wrote: >> I could put up my weather ini file if that would help. Mine has 3 >> cities in it, but you could likely edit it. >> 73 >> Butch >> WA0VJR >> Node 3148 >> Wallace, ks. >> >> >> On Sun, 3 Feb 2019, Amanda Lee via Talk wrote: >> >>> Thanks for this. I don't have a .ini from a prior installation just >>> yet. I can follow this syntax just fine though and appreciate your >>> being so thoughtful as to how to code these entries. I fortunately >>> do have some of the coordinates for the points of interest I want to >>> follow and thanks for sharing a more accessible site as well. >>> >>> Kind regards, >>> >>> Amanda Lee >>> >>> >>> -Original Message- >>> From: Talk >>> >>> On Behalf Of David via Talk >>> Sent: Sunday, February 3, 2019 5:58 PM >>> To: Window-Eyes Discussion List >>> Cc: David >>> Subject: Re: Weather or not issue >>> >>> OK, guys. >>> This, is going to be a rather long message, so work your way through. >>> I will try to share my findings on the issue you are having, with >>> the WeatherOrNot app. These are based on some fooling around, and >>> quick searchings on the net, so take them for what
Re: Weather or not issue
Butch, I for one would appreciate seeing your weather.ini file. Sorry David, I haven't yet had time to look at your instructions, but plan to do so. I find it kind of interesting that if one fills in the zip code of a particular location, that it equates to the longitude or latitude of a particular city . Any ideas as to how this works, or is this a big "duh" on my part Thanks so much though for your help from I'm sure all of us who wish to continue using this handy little app. Larry On 2/4/2019 7:48 AM, Butch Bussen via Talk wrote: I could put up my weather ini file if that would help. Mine has 3 cities in it, but you could likely edit it. 73 Butch WA0VJR Node 3148 Wallace, ks. On Sun, 3 Feb 2019, Amanda Lee via Talk wrote: Thanks for this. I don't have a .ini from a prior installation just yet. I can follow this syntax just fine though and appreciate your being so thoughtful as to how to code these entries. I fortunately do have some of the coordinates for the points of interest I want to follow and thanks for sharing a more accessible site as well. Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of David via Talk Sent: Sunday, February 3, 2019 5:58 PM To: Window-Eyes Discussion List Cc: David Subject: Re: Weather or not issue OK, guys. This, is going to be a rather long message, so work your way through. I will try to share my findings on the issue you are having, with the WeatherOrNot app. These are based on some fooling around, and quick searchings on the net, so take them for what they are worth. I do have no clue exactly where, how or what the Weather app extracts its info, so you will have to do your own playing around. But when I tried the following steps, it at least gave me some results. Smiles. As someone suggested, please make it a habit of backing up any file before you modify it at all. OK, the first thing we need to know, is the Longitude and Latitude coordinates, in a decimal format, for the city or place you are trying to add. I did try a few webpages, and here is one that I found to be fairly easy to operate with WinEyes: https://www.latlong.net/ When opening the page, go to the first Edit box, and here enter your city. Like: Toronto, On for finding the city of Toronto in the province of Ontario, in Canada. Once you have typed your info, hit the Enter key. Please note, it seems that you will have to manually turn back on Browse Mode here. The page will now come up with its results. If it found the exact city or place, it will give you two edit boxes, right beneath the Find-button on the page. They will hold the necessary numbers, for the Longitude and Latitude. Copy and paste them into your ini file, as will be described below. In a few cases, I noticed the page came up with more than one choice for the city. They then were presented in a table, with a link for each city. You would simply choose the wanted link, hit Enter, and go to the text line, that gives you the coordinates. Copy and paste the given info into your ini file. How To Modify The Ini File? Now that we have found the needed info to direct the app, let's get to the real job. And, yes, it is a bit of typing to be done. We will go by it, step by step. First, open your WE control panel, and hit Alt-F, followed by the letter E. The user profile folder will open. Keep pressing the W, til you get to the file named: WeatherOrNot.ini , and hit Enter on it. It should open in something like Notepad. Please note, from here, it will be good to have your synth spell out all punctuations, and even Upper- and Lower-cased characters, as they are all important. In the ini file, scroll down to the line that reads [Locations] . Do NOT modify this line. Hit the End-key, to go to the end of the line, and then Hit Enter. You now have a blank line for entering your personalized info. What the app wants here, is a section name, for your new location. To keep our above example rolling, enter the following line. Or, modify it to your personal location: Toronto, Ontario=43.651890, -79.381710 . To break this line down, please note: To the left of the Equals sign, we give the app the name of the location we are entering. It doesn't really matter what name you give it, long as you keep track of the exact name and spelling - as we will be using it in a moment. Behind the Equal sign, we give the two coordinates, as copied from the website. First the Latitude, followed by a Comma, A space character, and then the Longitude value. No other info, no other punctuation. The coordinates should be given in positive or negative values, exactly copied from the website. Once this Location line has been established, we are ready to move on to the next modification of the ini file. Move yourself to the bottom of the file, by hitting Ctrl-end. You now will have to enter a section, holding the actual settings for
RE: Weather or not issue
I could put up my weather ini file if that would help. Mine has 3 cities in it, but you could likely edit it. 73 Butch WA0VJR Node 3148 Wallace, ks. On Sun, 3 Feb 2019, Amanda Lee via Talk wrote: Thanks for this. I don't have a .ini from a prior installation just yet. I can follow this syntax just fine though and appreciate your being so thoughtful as to how to code these entries. I fortunately do have some of the coordinates for the points of interest I want to follow and thanks for sharing a more accessible site as well. Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of David via Talk Sent: Sunday, February 3, 2019 5:58 PM To: Window-Eyes Discussion List Cc: David Subject: Re: Weather or not issue OK, guys. This, is going to be a rather long message, so work your way through. I will try to share my findings on the issue you are having, with the WeatherOrNot app. These are based on some fooling around, and quick searchings on the net, so take them for what they are worth. I do have no clue exactly where, how or what the Weather app extracts its info, so you will have to do your own playing around. But when I tried the following steps, it at least gave me some results. Smiles. As someone suggested, please make it a habit of backing up any file before you modify it at all. OK, the first thing we need to know, is the Longitude and Latitude coordinates, in a decimal format, for the city or place you are trying to add. I did try a few webpages, and here is one that I found to be fairly easy to operate with WinEyes: https://www.latlong.net/ When opening the page, go to the first Edit box, and here enter your city. Like: Toronto, On for finding the city of Toronto in the province of Ontario, in Canada. Once you have typed your info, hit the Enter key. Please note, it seems that you will have to manually turn back on Browse Mode here. The page will now come up with its results. If it found the exact city or place, it will give you two edit boxes, right beneath the Find-button on the page. They will hold the necessary numbers, for the Longitude and Latitude. Copy and paste them into your ini file, as will be described below. In a few cases, I noticed the page came up with more than one choice for the city. They then were presented in a table, with a link for each city. You would simply choose the wanted link, hit Enter, and go to the text line, that gives you the coordinates. Copy and paste the given info into your ini file. How To Modify The Ini File? Now that we have found the needed info to direct the app, let's get to the real job. And, yes, it is a bit of typing to be done. We will go by it, step by step. First, open your WE control panel, and hit Alt-F, followed by the letter E. The user profile folder will open. Keep pressing the W, til you get to the file named: WeatherOrNot.ini , and hit Enter on it. It should open in something like Notepad. Please note, from here, it will be good to have your synth spell out all punctuations, and even Upper- and Lower-cased characters, as they are all important. In the ini file, scroll down to the line that reads [Locations] . Do NOT modify this line. Hit the End-key, to go to the end of the line, and then Hit Enter. You now have a blank line for entering your personalized info. What the app wants here, is a section name, for your new location. To keep our above example rolling, enter the following line. Or, modify it to your personal location: Toronto, Ontario=43.651890, -79.381710 . To break this line down, please note: To the left of the Equals sign, we give the app the name of the location we are entering. It doesn't really matter what name you give it, long as you keep track of the exact name and spelling - as we will be using it in a moment. Behind the Equal sign, we give the two coordinates, as copied from the website. First the Latitude, followed by a Comma, A space character, and then the Longitude value. No other info, no other punctuation. The coordinates should be given in positive or negative values, exactly copied from the website. Once this Location line has been established, we are ready to move on to the next modification of the ini file. Move yourself to the bottom of the file, by hitting Ctrl-end. You now will have to enter a section, holding the actual settings for your new location. this section, it is, that controls how and what info the app will read to you. A section, always starts out with a header. That is, a line enclosed in brackets. The header, should be an exact copy of the info you entered to the left of the Equal sign, in your location line. It is case, and character sensitive, so make sure you get an one-by-one copy of your location line. In our example, it will look like this: [Toronto, ontario] . Press Enter when you are done. Now that we have established the section, it is time to set it all up. The section should
RE: Weather or not issue
Thanks for this. I don't have a .ini from a prior installation just yet. I can follow this syntax just fine though and appreciate your being so thoughtful as to how to code these entries. I fortunately do have some of the coordinates for the points of interest I want to follow and thanks for sharing a more accessible site as well. Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of David via Talk Sent: Sunday, February 3, 2019 5:58 PM To: Window-Eyes Discussion List Cc: David Subject: Re: Weather or not issue OK, guys. This, is going to be a rather long message, so work your way through. I will try to share my findings on the issue you are having, with the WeatherOrNot app. These are based on some fooling around, and quick searchings on the net, so take them for what they are worth. I do have no clue exactly where, how or what the Weather app extracts its info, so you will have to do your own playing around. But when I tried the following steps, it at least gave me some results. Smiles. As someone suggested, please make it a habit of backing up any file before you modify it at all. OK, the first thing we need to know, is the Longitude and Latitude coordinates, in a decimal format, for the city or place you are trying to add. I did try a few webpages, and here is one that I found to be fairly easy to operate with WinEyes: https://www.latlong.net/ When opening the page, go to the first Edit box, and here enter your city. Like: Toronto, On for finding the city of Toronto in the province of Ontario, in Canada. Once you have typed your info, hit the Enter key. Please note, it seems that you will have to manually turn back on Browse Mode here. The page will now come up with its results. If it found the exact city or place, it will give you two edit boxes, right beneath the Find-button on the page. They will hold the necessary numbers, for the Longitude and Latitude. Copy and paste them into your ini file, as will be described below. In a few cases, I noticed the page came up with more than one choice for the city. They then were presented in a table, with a link for each city. You would simply choose the wanted link, hit Enter, and go to the text line, that gives you the coordinates. Copy and paste the given info into your ini file. How To Modify The Ini File? Now that we have found the needed info to direct the app, let's get to the real job. And, yes, it is a bit of typing to be done. We will go by it, step by step. First, open your WE control panel, and hit Alt-F, followed by the letter E. The user profile folder will open. Keep pressing the W, til you get to the file named: WeatherOrNot.ini , and hit Enter on it. It should open in something like Notepad. Please note, from here, it will be good to have your synth spell out all punctuations, and even Upper- and Lower-cased characters, as they are all important. In the ini file, scroll down to the line that reads [Locations] . Do NOT modify this line. Hit the End-key, to go to the end of the line, and then Hit Enter. You now have a blank line for entering your personalized info. What the app wants here, is a section name, for your new location. To keep our above example rolling, enter the following line. Or, modify it to your personal location: Toronto, Ontario=43.651890, -79.381710 . To break this line down, please note: To the left of the Equals sign, we give the app the name of the location we are entering. It doesn't really matter what name you give it, long as you keep track of the exact name and spelling - as we will be using it in a moment. Behind the Equal sign, we give the two coordinates, as copied from the website. First the Latitude, followed by a Comma, A space character, and then the Longitude value. No other info, no other punctuation. The coordinates should be given in positive or negative values, exactly copied from the website. Once this Location line has been established, we are ready to move on to the next modification of the ini file. Move yourself to the bottom of the file, by hitting Ctrl-end. You now will have to enter a section, holding the actual settings for your new location. this section, it is, that controls how and what info the app will read to you. A section, always starts out with a header. That is, a line enclosed in brackets. The header, should be an exact copy of the info you entered to the left of the Equal sign, in your location line. It is case, and character sensitive, so make sure you get an one-by-one copy of your location line. In our example, it will look like this: [Toronto, ontario] . Press Enter when you are done. Now that we have established the section, it is time to set it all up. The section should hold four fields. They are placed on individual lines, their name spelled all in lower-cases, and ends with an Equal sign, and your wanted setting. Lets get to them one by one. name= Here enter
Re: Weather or not issue
OK, guys. This, is going to be a rather long message, so work your way through. I will try to share my findings on the issue you are having, with the WeatherOrNot app. These are based on some fooling around, and quick searchings on the net, so take them for what they are worth. I do have no clue exactly where, how or what the Weather app extracts its info, so you will have to do your own playing around. But when I tried the following steps, it at least gave me some results. Smiles. As someone suggested, please make it a habit of backing up any file before you modify it at all. OK, the first thing we need to know, is the Longitude and Latitude coordinates, in a decimal format, for the city or place you are trying to add. I did try a few webpages, and here is one that I found to be fairly easy to operate with WinEyes: https://www.latlong.net/ When opening the page, go to the first Edit box, and here enter your city. Like: Toronto, On for finding the city of Toronto in the province of Ontario, in Canada. Once you have typed your info, hit the Enter key. Please note, it seems that you will have to manually turn back on Browse Mode here. The page will now come up with its results. If it found the exact city or place, it will give you two edit boxes, right beneath the Find-button on the page. They will hold the necessary numbers, for the Longitude and Latitude. Copy and paste them into your ini file, as will be described below. In a few cases, I noticed the page came up with more than one choice for the city. They then were presented in a table, with a link for each city. You would simply choose the wanted link, hit Enter, and go to the text line, that gives you the coordinates. Copy and paste the given info into your ini file. How To Modify The Ini File? Now that we have found the needed info to direct the app, let's get to the real job. And, yes, it is a bit of typing to be done. We will go by it, step by step. First, open your WE control panel, and hit Alt-F, followed by the letter E. The user profile folder will open. Keep pressing the W, til you get to the file named: WeatherOrNot.ini , and hit Enter on it. It should open in something like Notepad. Please note, from here, it will be good to have your synth spell out all punctuations, and even Upper- and Lower-cased characters, as they are all important. In the ini file, scroll down to the line that reads [Locations] . Do NOT modify this line. Hit the End-key, to go to the end of the line, and then Hit Enter. You now have a blank line for entering your personalized info. What the app wants here, is a section name, for your new location. To keep our above example rolling, enter the following line. Or, modify it to your personal location: Toronto, Ontario=43.651890, -79.381710 . To break this line down, please note: To the left of the Equals sign, we give the app the name of the location we are entering. It doesn't really matter what name you give it, long as you keep track of the exact name and spelling - as we will be using it in a moment. Behind the Equal sign, we give the two coordinates, as copied from the website. First the Latitude, followed by a Comma, A space character, and then the Longitude value. No other info, no other punctuation. The coordinates should be given in positive or negative values, exactly copied from the website. Once this Location line has been established, we are ready to move on to the next modification of the ini file. Move yourself to the bottom of the file, by hitting Ctrl-end. You now will have to enter a section, holding the actual settings for your new location. this section, it is, that controls how and what info the app will read to you. A section, always starts out with a header. That is, a line enclosed in brackets. The header, should be an exact copy of the info you entered to the left of the Equal sign, in your location line. It is case, and character sensitive, so make sure you get an one-by-one copy of your location line. In our example, it will look like this: [Toronto, ontario] . Press Enter when you are done. Now that we have established the section, it is time to set it all up. The section should hold four fields. They are placed on individual lines, their name spelled all in lower-cases, and ends with an Equal sign, and your wanted setting. Lets get to them one by one. name= Here enter the name of the location, that you want read out to you, whenever you press the hotkey. It could be the city name, or some kind of an alias - like home, work, grandma's place, or whatever. Our example line could be: name=Toronto or, Name=Big city of Canada. Please note, that you can use a mix of upper- and lower-cased characters, along with normal punctuation (except from the Equal sign), or even numbers - in your string here. temp= Behind the Equal sign, enter a lower-cased c, for Celcius; or a lowercased f, for having the
RE: Weather or not issue
NVDA does have a version of Eloquence that you can buy from Code factory. I am using the SAPI 5 version of Eloquence. -Original Message- From: Talk [mailto:talk-bounces+skyt=shaw...@lists.window-eyes.com] On Behalf Of Larry Higgins via Talk Sent: Sunday, February 03, 2019 12:12 PM To: Lloyd Rasmussen via Talk Cc: Larry Higgins Subject: Re: Weather or not issue Thanks Lloyd, however, I am just a real devotee of my Eloquence Reed voice. On 2/3/2019 1:11 PM, Lloyd Rasmussen via Talk wrote: > If you are using Windows 10, you can use NVDA with the new OneCore > voices from Microsoft. Not quite as responsive as ESpeak, but the > David desktop or mobile voice is not bad, in my opinion. > > > > Lloyd Rasmussen, Kensington, MD > http://lras.home.sprynet.com > -Original Message- From: Larry Higgins via Talk > Sent: Sunday, February 03, 2019 10:39 AM > To: Rod Hutton via Talk > Cc: Larry Higgins > Subject: Re: Weather or not issue > > Sure looks like I might be quickly approaching that point. I still need > to purchase a license for Eloquence, then I might really begin to tackle > it. Right now, I am able to read my Bookshare books quite well with IE > and WE to my satisfaction, so guess not in the biggest hurry, but I'm > beginning to feel the heat . > > On 2/3/2019 7:42 AM, Rod Hutton via Talk wrote: >> Hi Larry, >> >> If you're open to using NVDA, there is a similar add-on for it called >> Weather Plus. >> >> Hth, >> >> Rod >> >> Sent from Outlook for Windows >> >> -Original Message- >> From: Talk >> On Behalf >> Of Larry Higgins via Talk >> Sent: February 3, 2019 8:30 AM >> To: Loy Green via Talk >> Cc: Larry Higgins >> Subject: Re: Weather or not issue >> >> That's what happens here as well. I'm absolutely certain that I no >> longer have an old .ini file to take potential advantage of. So, guess >> this is only the beginning . >> >> On 2/3/2019 6:36 AM, Loy Green via Talk wrote: >>> I am getting the same here, however the cities that I have >>> previously entered still work. >>> - Original Message - >>> From: Larry Higgins via Talk >>> To: 'Window-Eyes Discussion List' >>> Cc: Larry Higgins >>> Sent: Saturday, February 2, 2019 1:44 PM >>> Subject: Weather or not issue >>> >>> >>> OK, I'm probably not ging to get any good news regarding a >>> solution for >>> my problem, but here goes anyway. >>> >>> >>> Just yesterday, I decided I would like to add Albuquerque, NM to >>> my list >>> of weather conditions around the country, but when either >>> entering the >>> city, state, and country, or zip code, I get a message saying >>> something >>> along the lines of "can't fine the city," or something of that >>> nature. >>> It doesn't matter just what city or zip code I type in, I get >>> the same >>> error message. >>> >>> >>> Is this a permanent issue, or might there be a solution. >>> >>> >>> Hopefully, >>> >>> >>> Larry >>> >>> ___ >>> Any views or opinions presented in this email are solely those >>> of the author and do not necessarily represent those of Ai Squared. >>> >>> For membership options, visit >>> https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Floyrg2845%2540gmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=JTv1eZyL20fR3WdOID9xRwkHRL%2BRehuk6H7mgqq4kfA%3Dreserved=0. >>> For subscription options, visit >>> https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 >>> List archives can be found at >>> https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 >>> ___ >>> Any views or o
Re: Weather or not issue
Thanks Lloyd, however, I am just a real devotee of my Eloquence Reed voice. On 2/3/2019 1:11 PM, Lloyd Rasmussen via Talk wrote: If you are using Windows 10, you can use NVDA with the new OneCore voices from Microsoft. Not quite as responsive as ESpeak, but the David desktop or mobile voice is not bad, in my opinion. Lloyd Rasmussen, Kensington, MD http://lras.home.sprynet.com -Original Message- From: Larry Higgins via Talk Sent: Sunday, February 03, 2019 10:39 AM To: Rod Hutton via Talk Cc: Larry Higgins Subject: Re: Weather or not issue Sure looks like I might be quickly approaching that point. I still need to purchase a license for Eloquence, then I might really begin to tackle it. Right now, I am able to read my Bookshare books quite well with IE and WE to my satisfaction, so guess not in the biggest hurry, but I'm beginning to feel the heat . On 2/3/2019 7:42 AM, Rod Hutton via Talk wrote: Hi Larry, If you're open to using NVDA, there is a similar add-on for it called Weather Plus. Hth, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: February 3, 2019 8:30 AM To: Loy Green via Talk Cc: Larry Higgins Subject: Re: Weather or not issue That's what happens here as well. I'm absolutely certain that I no longer have an old .ini file to take potential advantage of. So, guess this is only the beginning . On 2/3/2019 6:36 AM, Loy Green via Talk wrote: I am getting the same here, however the cities that I have previously entered still work. - Original Message - From: Larry Higgins via Talk To: 'Window-Eyes Discussion List' Cc: Larry Higgins Sent: Saturday, February 2, 2019 1:44 PM Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Floyrg2845%2540gmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=JTv1eZyL20fR3WdOID9xRwkHRL%2BRehuk6H7mgqq4kfA%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Flarryhiggins22%2540comcast.netdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=TnCGrSYHQ3kFOAflyETaZOHm6aMmggY61VcevcmgRw8%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily
RE: Weather or not issue
Hello Rod, hope you are doing well. Where do I get the nvda add on. I jump back and forth between window-eyes and nvda, flat r refuse to use jaws. 73 Butch WA0VJR Node 3148 Wallace, ks. On Sun, 3 Feb 2019, Rod Hutton via Talk wrote: Hi Larry, If you're open to using NVDA, there is a similar add-on for it called Weather Plus. Hth, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: February 3, 2019 8:30 AM To: Loy Green via Talk Cc: Larry Higgins Subject: Re: Weather or not issue That's what happens here as well. I'm absolutely certain that I no longer have an old .ini file to take potential advantage of. So, guess this is only the beginning . On 2/3/2019 6:36 AM, Loy Green via Talk wrote: I am getting the same here, however the cities that I have previously entered still work. - Original Message - From: Larry Higgins via Talk To: 'Window-Eyes Discussion List' Cc: Larry Higgins Sent: Saturday, February 2, 2019 1:44 PM Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Floyrg2845%2540gmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=JTv1eZyL20fR3WdOID9xRwkHRL%2BRehuk6H7mgqq4kfA%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Flarryhiggins22%2540comcast.netdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=TnCGrSYHQ3kFOAflyETaZOHm6aMmggY61VcevcmgRw8%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Frod_hutton%2540hotmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=VBY9W2xASbY3eMQ9ZZg7%2FFsVkl%2BAR32bJMNmMWT2baI%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3D
RE: Weather or not issue
Hi Lloyd, Thanks. I was not aware of this, and so it was good to learn this. All the best, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Lloyd Rasmussen via Talk Sent: February 3, 2019 2:11 PM To: Window-Eyes Discussion List Cc: Lloyd Rasmussen Subject: Re: Weather or not issue If you are using Windows 10, you can use NVDA with the new OneCore voices from Microsoft. Not quite as responsive as ESpeak, but the David desktop or mobile voice is not bad, in my opinion. Lloyd Rasmussen, Kensington, MD https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Flras.home.sprynet.comdata=02%7C01%7C%7Cb910222a82a74649c6ac08d68a0b5f1d%7C84df9e7fe9f640afb435%7C1%7C0%7C636848178771212509sdata=nK%2Fp0w%2Ba07KWZEufZkhoZCO0nvgeSI%2B5GGn8NwWvzJ4%3Dreserved=0 -Original Message- From: Larry Higgins via Talk Sent: Sunday, February 03, 2019 10:39 AM To: Rod Hutton via Talk Cc: Larry Higgins Subject: Re: Weather or not issue Sure looks like I might be quickly approaching that point. I still need to purchase a license for Eloquence, then I might really begin to tackle it. Right now, I am able to read my Bookshare books quite well with IE and WE to my satisfaction, so guess not in the biggest hurry, but I'm beginning to feel the heat . On 2/3/2019 7:42 AM, Rod Hutton via Talk wrote: > Hi Larry, > > If you're open to using NVDA, there is a similar add-on for it called > Weather Plus. > > Hth, > > Rod > > Sent from Outlook for Windows > > -Original Message- > From: Talk On > Behalf Of Larry Higgins via Talk > Sent: February 3, 2019 8:30 AM > To: Loy Green via Talk > Cc: Larry Higgins > Subject: Re: Weather or not issue > > That's what happens here as well. I'm absolutely certain that I no > longer have an old .ini file to take potential advantage of. So, guess > this is only the beginning . > > On 2/3/2019 6:36 AM, Loy Green via Talk wrote: >> I am getting the same here, however the cities that I have previously >> entered still work. >> - Original Message - >> From: Larry Higgins via Talk >> To: 'Window-Eyes Discussion List' >> Cc: Larry Higgins >> Sent: Saturday, February 2, 2019 1:44 PM >> Subject: Weather or not issue >> >> >> OK, I'm probably not ging to get any good news regarding a solution >> for >> my problem, but here goes anyway. >> >> >> Just yesterday, I decided I would like to add Albuquerque, NM to my >> list >> of weather conditions around the country, but when either entering >> the >> city, state, and country, or zip code, I get a message saying >> something >> along the lines of "can't fine the city," or something of that >> nature. >> It doesn't matter just what city or zip code I type in, I get the >> same >> error message. >> >> >> Is this a permanent issue, or might there be a solution. >> >> >> Hopefully, >> >> >> Larry >> >> ___ >> Any views or opinions presented in this email are solely those of the >> author and do not necessarily represent those of Ai Squared. >> >> For membership options, visit >> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Feur04.safelinks.protection.outlook.com%2F%3Furl%3Dhttp%253A%252F%252Flists.window-eyes.com%252Foptions.cgi%252Ftalk-window-eyes.com%252Floyrg2845%252540gmail.com%26data%3D02%257C01%257C%257C4839bd885ede44cd9e6208d689dbd343%257C84df9e7fe9f640afb435%257C1%257C0%257C636847974563307419%26sdata%3DJTv1eZyL20fR3WdOID9xRwkHRL%252BRehuk6H7mgqq4kfA%253D%26reserved%3D0data=02%7C01%7C%7Cb910222a82a74649c6ac08d68a0b5f1d%7C84df9e7fe9f640afb435%7C1%7C0%7C636848178771212509sdata=R1SRSrDd8%2B1Ipx0aQmzUJaic1kTknP0ln2IyqrL2cm0%3Dreserved=0. >> For subscription options, visit >> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Feur04.safelinks.protection.outlook.com%2F%3Furl%3Dhttp%253A%252F%252Flists.window-eyes.com%252Flistinfo.cgi%252Ftalk-window-eyes.com%26data%3D02%257C01%257C%257C4839bd885ede44cd9e6208d689dbd343%257C84df9e7fe9f640afb435%257C1%257C0%257C636847974563307419%26sdata%3DNABf1u%252F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%252Bs%253D%26reserved%3D0data=02%7C01%7C%7Cb910222a82a74649c6ac08d68a0b5f1d%7C84df9e7fe9f640afb435%7C1%7C0%7C636848178771222526sdata=LZoydRJQ4x2aXRgFf%2BAZzgdj9JifUOWeHyBMIOviJfo%3Dreserved=0 >> List archives can be found at >> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Feur04.safelinks.protection.outlook.com%2F%3Furl%3Dhttp%253A%252F%252Flists.wi
Re: Weather or not issue
If you are using Windows 10, you can use NVDA with the new OneCore voices from Microsoft. Not quite as responsive as ESpeak, but the David desktop or mobile voice is not bad, in my opinion. Lloyd Rasmussen, Kensington, MD http://lras.home.sprynet.com -Original Message- From: Larry Higgins via Talk Sent: Sunday, February 03, 2019 10:39 AM To: Rod Hutton via Talk Cc: Larry Higgins Subject: Re: Weather or not issue Sure looks like I might be quickly approaching that point. I still need to purchase a license for Eloquence, then I might really begin to tackle it. Right now, I am able to read my Bookshare books quite well with IE and WE to my satisfaction, so guess not in the biggest hurry, but I'm beginning to feel the heat . On 2/3/2019 7:42 AM, Rod Hutton via Talk wrote: Hi Larry, If you're open to using NVDA, there is a similar add-on for it called Weather Plus. Hth, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: February 3, 2019 8:30 AM To: Loy Green via Talk Cc: Larry Higgins Subject: Re: Weather or not issue That's what happens here as well. I'm absolutely certain that I no longer have an old .ini file to take potential advantage of. So, guess this is only the beginning . On 2/3/2019 6:36 AM, Loy Green via Talk wrote: I am getting the same here, however the cities that I have previously entered still work. - Original Message - From: Larry Higgins via Talk To: 'Window-Eyes Discussion List' Cc: Larry Higgins Sent: Saturday, February 2, 2019 1:44 PM Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Floyrg2845%2540gmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=JTv1eZyL20fR3WdOID9xRwkHRL%2BRehuk6H7mgqq4kfA%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Flarryhiggins22%2540comcast.netdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=TnCGrSYHQ3kFOAflyETaZOHm6aMmggY61VcevcmgRw8%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fli
Re: Weather or not issue
Sure looks like I might be quickly approaching that point. I still need to purchase a license for Eloquence, then I might really begin to tackle it. Right now, I am able to read my Bookshare books quite well with IE and WE to my satisfaction, so guess not in the biggest hurry, but I'm beginning to feel the heat . On 2/3/2019 7:42 AM, Rod Hutton via Talk wrote: Hi Larry, If you're open to using NVDA, there is a similar add-on for it called Weather Plus. Hth, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: February 3, 2019 8:30 AM To: Loy Green via Talk Cc: Larry Higgins Subject: Re: Weather or not issue That's what happens here as well. I'm absolutely certain that I no longer have an old .ini file to take potential advantage of. So, guess this is only the beginning . On 2/3/2019 6:36 AM, Loy Green via Talk wrote: I am getting the same here, however the cities that I have previously entered still work. - Original Message - From: Larry Higgins via Talk To: 'Window-Eyes Discussion List' Cc: Larry Higgins Sent: Saturday, February 2, 2019 1:44 PM Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Floyrg2845%2540gmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=JTv1eZyL20fR3WdOID9xRwkHRL%2BRehuk6H7mgqq4kfA%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Flarryhiggins22%2540comcast.netdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=TnCGrSYHQ3kFOAflyETaZOHm6aMmggY61VcevcmgRw8%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 List archives can be found at https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Frod_hutton%2540hotmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=VBY9W2xASbY3eMQ9ZZg7%2FFsVkl%2BAR32bJMNmMWT2baI%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=
RE: Weather or not issue
Hi Larry, If you're open to using NVDA, there is a similar add-on for it called Weather Plus. Hth, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: February 3, 2019 8:30 AM To: Loy Green via Talk Cc: Larry Higgins Subject: Re: Weather or not issue That's what happens here as well. I'm absolutely certain that I no longer have an old .ini file to take potential advantage of. So, guess this is only the beginning . On 2/3/2019 6:36 AM, Loy Green via Talk wrote: > I am getting the same here, however the cities that I have previously entered > still work. >- Original Message - >From: Larry Higgins via Talk >To: 'Window-Eyes Discussion List' >Cc: Larry Higgins >Sent: Saturday, February 2, 2019 1:44 PM >Subject: Weather or not issue > > >OK, I'm probably not ging to get any good news regarding a solution for >my problem, but here goes anyway. > > >Just yesterday, I decided I would like to add Albuquerque, NM to my list >of weather conditions around the country, but when either entering the >city, state, and country, or zip code, I get a message saying something >along the lines of "can't fine the city," or something of that nature. >It doesn't matter just what city or zip code I type in, I get the same >error message. > > >Is this a permanent issue, or might there be a solution. > > >Hopefully, > > >Larry > >___ >Any views or opinions presented in this email are solely those of the > author and do not necessarily represent those of Ai Squared. > >For membership options, visit > https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Floyrg2845%2540gmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=JTv1eZyL20fR3WdOID9xRwkHRL%2BRehuk6H7mgqq4kfA%3Dreserved=0. >For subscription options, visit > https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 >List archives can be found at > https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 > ___ > Any views or opinions presented in this email are solely those of the author > and do not necessarily represent those of Ai Squared. > > For membership options, visit > https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Flarryhiggins22%2540comcast.netdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=TnCGrSYHQ3kFOAflyETaZOHm6aMmggY61VcevcmgRw8%3Dreserved=0. > For subscription options, visit > https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2Bs%3Dreserved=0 > List archives can be found at > https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=qIdwgA5T7%2BMK32aNRPDvIClTLgjn8u9YBobCPfpz548%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Frod_hutton%2540hotmail.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=VBY9W2xASbY3eMQ9ZZg7%2FFsVkl%2BAR32bJMNmMWT2baI%3Dreserved=0. For subscription options, visit https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C4839bd885ede44cd9e6208d689dbd343%7C84df9e7fe9f640afb435%7C1%7C0%7C636847974563307419sdata=NABf1u%2F3WUpjlVwEmLYn0L4Te2iGexQSJjYeQE53n%2B
Re: Weather or not issue
That's what happens here as well. I'm absolutely certain that I no longer have an old .ini file to take potential advantage of. So, guess this is only the beginning . On 2/3/2019 6:36 AM, Loy Green via Talk wrote: I am getting the same here, however the cities that I have previously entered still work. - Original Message - From: Larry Higgins via Talk To: 'Window-Eyes Discussion List' Cc: Larry Higgins Sent: Saturday, February 2, 2019 1:44 PM Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/loyrg2845%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/larryhiggins22%40comcast.net. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
Re: Weather or not issue
I am getting the same here, however the cities that I have previously entered still work. - Original Message - From: Larry Higgins via Talk To: 'Window-Eyes Discussion List' Cc: Larry Higgins Sent: Saturday, February 2, 2019 1:44 PM Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/loyrg2845%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
RE: Weather or not issue
Good idea as I may have a copy on another Win 7 computer which I can copy from. -Original Message- From: Talk On Behalf Of Rod Hutton via Talk Sent: Sunday, February 3, 2019 12:13 AM To: Window-Eyes Discussion List Cc: Rod Hutton Subject: RE: Weather or not issue Hi Larry, I have the current versions of GW Toolkit, 8.6.8, as well as Weather or Not, 4.0.0. The app is working fine for me, giving me my current weather conditions. I tried adding your city, but I get the same error as you. I have tried looking at the code of the app, in the hope of determining and possibly changing the weather information server it uses. Unfortunately, the app is encrypted, making it impossible to do anything with it. Given that I can confirm that the app works, I can only suggest that if you ever used the app to get your local weather, see if you can find an old backup copy of the Weather Or Not ini file, and paste it into the Profile folder. The file you need is named weatherornot.ini, and, before pasting it into the Profiles folder, you should probably rename the current one to something like weatherornot.ini.current. Sorry I can't be of more help. Good luck, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: February 2, 2019 1:44 PM To: 'Window-Eyes Discussion List' Cc: Larry Higgins Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Frod_hutton%2540hotmail.comdata=02%7C01%7C%7C71041e6ad77e4111c5ad08d6893e7bae%7C84df9e7fe9f640afb435%7C1%7C0%7C636847298787631875sdata=bICvgRHnaJFu%2FH6DUBkcNRraoT8b5zaeAfecihFTFEw%3Dreserved=0. For subscription options, visit https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C71041e6ad77e4111c5ad08d6893e7bae%7C84df9e7fe9f640afb435%7C1%7C0%7C636847298787631875sdata=x92J0tQFKhlKbw2FH4H777fSYiBV%2BrFmjO%2BTPZ67vyI%3Dreserved=0 List archives can be found at https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C71041e6ad77e4111c5ad08d6893e7bae%7C84df9e7fe9f640afb435%7C1%7C0%7C636847298787641892sdata=bBXdEIV1UafpS53E0vFNw9cdVg2A79QgniQwBPkDpko%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/amandainparadise777%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
RE: Weather or not issue
Hi Larry, I have the current versions of GW Toolkit, 8.6.8, as well as Weather or Not, 4.0.0. The app is working fine for me, giving me my current weather conditions. I tried adding your city, but I get the same error as you. I have tried looking at the code of the app, in the hope of determining and possibly changing the weather information server it uses. Unfortunately, the app is encrypted, making it impossible to do anything with it. Given that I can confirm that the app works, I can only suggest that if you ever used the app to get your local weather, see if you can find an old backup copy of the Weather Or Not ini file, and paste it into the Profile folder. The file you need is named weatherornot.ini, and, before pasting it into the Profiles folder, you should probably rename the current one to something like weatherornot.ini.current. Sorry I can't be of more help. Good luck, Rod Sent from Outlook for Windows -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: February 2, 2019 1:44 PM To: 'Window-Eyes Discussion List' Cc: Larry Higgins Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Foptions.cgi%2Ftalk-window-eyes.com%2Frod_hutton%2540hotmail.comdata=02%7C01%7C%7C71041e6ad77e4111c5ad08d6893e7bae%7C84df9e7fe9f640afb435%7C1%7C0%7C636847298787631875sdata=bICvgRHnaJFu%2FH6DUBkcNRraoT8b5zaeAfecihFTFEw%3Dreserved=0. For subscription options, visit https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Flistinfo.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C71041e6ad77e4111c5ad08d6893e7bae%7C84df9e7fe9f640afb435%7C1%7C0%7C636847298787631875sdata=x92J0tQFKhlKbw2FH4H777fSYiBV%2BrFmjO%2BTPZ67vyI%3Dreserved=0 List archives can be found at https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.window-eyes.com%2Fprivate.cgi%2Ftalk-window-eyes.comdata=02%7C01%7C%7C71041e6ad77e4111c5ad08d6893e7bae%7C84df9e7fe9f640afb435%7C1%7C0%7C636847298787641892sdata=bBXdEIV1UafpS53E0vFNw9cdVg2A79QgniQwBPkDpko%3Dreserved=0 ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
Re: Weather or not issue
Well Amanda, I just found my zipped file of WE apps, installed the GWToolkit, closed out WE, started it up again, and still no go. I'm not sure of the date on this on either, but it's all I've got available to me. As far as I know, this is the latest. On 2/2/2019 2:59 PM, Amanda Lee via Talk wrote: I'm referring to the GwToolkit The files unfortunately take on the current date in my windows 10 system so I am not certain of their original dates. My file for Weather or not -Original Message- From: Talk On Behalf Of Lloyd Rasmussen via Talk Sent: Saturday, February 2, 2019 3:04 PM To: Window-Eyes Discussion List Cc: Lloyd Rasmussen Subject: Re: Weather or not issue My Weatherornot files are from May 6 of 2016. Or are you talking about the GWToolkit? Lloyd Rasmussen, Kensington, MD http://lras.home.sprynet.com -Original Message- From: Amanda Lee via Talk Sent: Saturday, February 02, 2019 2:31 PM To: 'Window-Eyes Discussion List' Cc: Amanda Lee Subject: RE: Weather or not issue I have exactly the same issue after reinstalling window-Eyes. Weather Or Not does require GW Toolkit. I notice in the About info, that it says it's from 2008. I wonder if this is the correct version? If not,then hope I can find the appropriate one somewhere. I really miss this App too! Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: Saturday, February 2, 2019 1:44 PM To: 'Window-Eyes Discussion List' Cc: Larry Higgins Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/amandainparadi se777%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/lras%40sprynet .com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/amandainparadi se777%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/larryhiggins22%40comcast.net. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
RE: Weather or not issue
I'm referring to the GwToolkit The files unfortunately take on the current date in my windows 10 system so I am not certain of their original dates. My file for Weather or not -Original Message- From: Talk On Behalf Of Lloyd Rasmussen via Talk Sent: Saturday, February 2, 2019 3:04 PM To: Window-Eyes Discussion List Cc: Lloyd Rasmussen Subject: Re: Weather or not issue My Weatherornot files are from May 6 of 2016. Or are you talking about the GWToolkit? Lloyd Rasmussen, Kensington, MD http://lras.home.sprynet.com -Original Message- From: Amanda Lee via Talk Sent: Saturday, February 02, 2019 2:31 PM To: 'Window-Eyes Discussion List' Cc: Amanda Lee Subject: RE: Weather or not issue I have exactly the same issue after reinstalling window-Eyes. Weather Or Not does require GW Toolkit. I notice in the About info, that it says it's from 2008. I wonder if this is the correct version? If not,then hope I can find the appropriate one somewhere. I really miss this App too! Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: Saturday, February 2, 2019 1:44 PM To: 'Window-Eyes Discussion List' Cc: Larry Higgins Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/amandainparadi se777%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/lras%40sprynet .com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/amandainparadi se777%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
Re: Weather or not issue
My Weatherornot files are from May 6 of 2016. Or are you talking about the GWToolkit? Lloyd Rasmussen, Kensington, MD http://lras.home.sprynet.com -Original Message- From: Amanda Lee via Talk Sent: Saturday, February 02, 2019 2:31 PM To: 'Window-Eyes Discussion List' Cc: Amanda Lee Subject: RE: Weather or not issue I have exactly the same issue after reinstalling window-Eyes. Weather Or Not does require GW Toolkit. I notice in the About info, that it says it's from 2008. I wonder if this is the correct version? If not,then hope I can find the appropriate one somewhere. I really miss this App too! Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: Saturday, February 2, 2019 1:44 PM To: 'Window-Eyes Discussion List' Cc: Larry Higgins Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/amandainparadise777%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/lras%40sprynet.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
RE: Weather or not issue
I have exactly the same issue after reinstalling window-Eyes. Weather Or Not does require GW Toolkit. I notice in the About info, that it says it's from 2008. I wonder if this is the correct version? If not,then hope I can find the appropriate one somewhere. I really miss this App too! Kind regards, Amanda Lee -Original Message- From: Talk On Behalf Of Larry Higgins via Talk Sent: Saturday, February 2, 2019 1:44 PM To: 'Window-Eyes Discussion List' Cc: Larry Higgins Subject: Weather or not issue OK, I'm probably not ging to get any good news regarding a solution for my problem, but here goes anyway. Just yesterday, I decided I would like to add Albuquerque, NM to my list of weather conditions around the country, but when either entering the city, state, and country, or zip code, I get a message saying something along the lines of "can't fine the city," or something of that nature. It doesn't matter just what city or zip code I type in, I get the same error message. Is this a permanent issue, or might there be a solution. Hopefully, Larry ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/amandainparadise777%40gmail.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com ___ Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Ai Squared. For membership options, visit http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com. For subscription options, visit http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com List archives can be found at http://lists.window-eyes.com/private.cgi/talk-window-eyes.com