ok !
>Saturday, June 13, 2020 5:19 PM -05:00 from John D. :
>
>OK !
>
>
>>Saturday, June 13, 2020 4:24 PM -05:00 from Mateusz Konieczny via talk <
>>talk@openstreetmap.org >:
>>
>>Though if valid tagging results in poor results, then it still can be reported
Though if valid tagging results in poor results, then it still can be reported
https://github.com/openstreetmap/iD (check whatever it is already reported
before making a new issue)
Jun 6, 2020, 12:28 by talk@openstreetmap.org:
> >then why is the picture on top of the bridge when bridge is
i did not write the e-mail program,
but it looks like your talking about (reply all) not (reply).
>Saturday, June 13, 2020 2:28 PM -05:00 from Dave F via talk
>:
>
>Could you please reply to the forum list not just the sender. I assume you're
>the OP. Difficult to tell when you use
Could you please reply to the forum list not just the sender. I assume
you're the OP. Difficult to tell when you use different email addresses.
>then why is the picture on top of the bridge when bridge is added.
You appear to be confusing the ID editor with actual renderings of the
map. How
this was solved when someone said you can write your own.
>Monday, June 8, 2020 9:35 PM -05:00 from Warin <61sundow...@gmail.com>:
>
>On 9/6/20 12:01 am, 80hnhtv4agou--- via talk wrote:
>> YES !, i guess what i am saying i would like to see more drop down
>> options.
>
>How many options
On 9/6/20 12:01 am, 80hnhtv4agou--- via talk wrote:
YES !, i guess what i am saying i would like to see more drop down
options.
How many options would you like?
Enough for many pages of options?
Add seasonal, open_hours, description, etc etc?
Personally I don't use drop down menus, prefer
On 08/06/2020 18:12, Martin Koppenhoefer wrote:
sent from a phone
On 8. Jun 2020, at 16:15, Dave F wrote:
Good Lord!
That has both tunnel & bridge tags on the same object!
This is not what is being discussed here.
it’s in the secondary thread that you started here ;-)
No Martin.
sent from a phone
> On 8. Jun 2020, at 16:15, Dave F wrote:
>
> Good Lord!
> That has both tunnel & bridge tags on the same object!
> This is not what is being discussed here.
it’s in the secondary thread that you started here ;-)
> There can't be both a tunnel and bridge. It's one or
Drop down options are not the only choice. You can add your own.
It's not compulsory to use those options. Common sense should be used.
If there's a bridge over, don't add tunnel/culvert to the way going under.
DaveF
On 08/06/2020 15:01, 80hnhtv4agou--- via talk wrote:
YES !, i guess what i
Good Lord!
That has both tunnel & bridge tags on the same object!
This is not what is being discussed here.
DaveF
On 08/06/2020 11:10, Martin Koppenhoefer wrote:
Am Sa., 6. Juni 2020 um 18:02 Uhr schrieb Dave F via talk
mailto:talk@openstreetmap.org>>:
Do you have an example?
A simple
YES !, i guess what i am saying i would like to see more drop down options.
>Monday, June 8, 2020 8:36 AM -05:00 from nwastra :
>
>I am not very familiar with the iD editor but I notice that where a stream and
>highway cross, what boxes and dropdowns are offered depends what you have
YES !
>Monday, June 8, 2020 8:37 AM -05:00 from nwastra :
>
>
>
>
>I am not very familiar with the iD editor but I notice that where a stream and
>highway cross, what boxes and dropdowns are offered depends what you have
>selected.
>If you have the stream selected you will be offered
I am not very familiar with the iD editor but I notice that where a stream and
highway cross, what boxes and dropdowns are offered depends what you have
selected.
If you have the stream selected you will be offered tunnel/culvert/layer/etc as
options.
If you have the highway selected you will
>i guss what i am saying, add a tunnel is wrong, when the road is on the
>bridge, and the drop down box
says culvert. again i am only seeing the ID map.
>
>i just tried it, it only says add a tunnel, then river is under bridge.
>
>
>>Monday, June 8, 2020 7:00 AM -05:00 from Mateusz
>in the ID editor, if you draw a stream - river line, and it crosses a road,
>you get a warning, with the suggestion
>
>add a bridge or tunnel.
>
>>Monday, June 8, 2020 5:13 AM -05:00 from Martin Koppenhoefer <
>>dieterdre...@gmail.com >:
>>
>>Am Sa., 6. Juni 2020 um 18:02 Uhr schrieb Dave
Is there anything wrong with that?
Jun 8, 2020, 13:57 by talk@openstreetmap.org:
>> in the ID editor, if you draw a stream - river line, and it crosses a road,
>> you get a warning, with the suggestion
>>
>> add a bridge or tunnel.
>>
>>
>>> Monday, June 8, 2020 5:13 AM -05:00 from
Am Sa., 6. Juni 2020 um 18:02 Uhr schrieb Dave F via talk <
talk@openstreetmap.org>:
> Do you have an example?
>
>
A simple example for a tunnel (here subway) on a bridge would be this:
https://www.openstreetmap.org/way/757824513
https://fr.wikipedia.org/wiki/Pont_Morand
> Whether it's a
Do you have an example?
Whether it's a bridge or tunnel is fairly easily defined by determining
which is taking the load.
If a tunnel's structure was removed, would whitewater's above it
collapse? If 'yes' then it's a tunnel.
DaveF
On 06/06/2020 16:48, Martin Koppenhoefer wrote:
sent
sent from a phone
> On 5. Jun 2020, at 15:44, Dave F via talk wrote:
>
> There can't be both a tunnel and bridge. It's one or the other. This goes for
> all scenarios, including roads.
you can have both, but it is rare...
and it depends on your definitions of course (e.g. you might call
On 5/6/20 10:45 pm, 80hnhtv4agou--- via talk wrote:
if water goes under a bridge, why in the ID editor is it pictured on
top of the bridge,
when the river stream comes to the bridge can you split and add tunnel ?
Is the 'layer=*' tagged correctly???
The item 'on top' should have a layer tag
then why is the picture on top of the bridge when bridge is added.
Hi,
Do you have an example (way number or position) so we can investigate
the issue?
Regards,
Martin.
___
talk mailing list
talk@openstreetmap.org
then why is the picture on top of the bridge when bridge is added.
>Friday, June 5, 2020 8:46 AM -05:00 from Mateusz Konieczny via talk
>:
>
>
>
>
>Jun 5, 2020, 14:45 by talk@openstreetmap.org:
>>if water goes under a bridge, why in the ID editor is it pictured on top of
>>the bridge,
Jun 5, 2020, 14:45 by talk@openstreetmap.org:
> if water goes under a bridge, why in the ID editor is it pictured on top of
> the bridge,
>
Is layer tag set correctly?
>
> when the river stream comes to the bridge can you split and add tunnel ?
>
>
No, if it is under bridge then
On 05/06/2020 13:45, 80hnhtv4agou--- via talk wrote:
when the river stream comes to the bridge can you split and add tunnel ?
There can't be both a tunnel and bridge. It's one or the other. This
goes for all scenarios, including roads.
DaveF
24 matches
Mail list logo
