ailto:time-nuts-boun...@febo.com] On
Behalf Of Bob Camp
Sent: 01 March 2010 12:52
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Achieving maximum performance when driving
5370A/Binputs
Hi
That's been my experience in the past with unusual RF connectors. U
me-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on
> > Behalf Of Dave hartzell
> > Sent: Sunday, February 28, 2010 7:28 PM
> > To: Discussion of precise time and frequency measurement
> > Subject: Re: [time-nuts] Achieving maximum performance when driving
> > 5370A/
Subject: Re: [time-nuts] Achieving maximum performance when driving
> 5370A/Binputs
>
>
> Today I have been trying to drive a 5370B directly from a TADD-2, with
> little luck (other HP freq counters seem to work OK). I was about to ask
> about it on this list, but noticed this thread
n of these pots.
Maybe it depends on vintage.
- Original Message - From: "Mark Sims"
To:
Sent: Saturday, February 27, 2010 10:10 PM
Subject: [time-nuts] Achieving maximum performance when driving
5370A/Binputs
If it's the one that I think it is... look closely at the
fixed shafts like this carefully with plastic swizzle sticks and
super glue. Did I say carefully? a little dab'll do ya...
Don
- Original Message - From: "Mark Sims"
To:
Sent: Saturday, February 27, 2010 10:10 PM
Subject: [time-nuts] Achieving maximum performance when dr
I've fixed shafts like this carefully with plastic swizzle sticks and super
glue. Did I say carefully? a little dab'll do ya...
Don
- Original Message -
From: "Mark Sims"
To:
Sent: Saturday, February 27, 2010 10:10 PM
Subject: [time-nuts] Achieving maximum perf
Arthur Dent wrote:
> "R-390 or S/390?"
>
> The R-390 receiver (designed by Collins) is probably worth more today
> than an S390. ;-)
Good point, and I apologize for the smart remark. I've worked with
both (and a Z900 Cu box is pretty quick :-)
-ls-
Hi
R-390 and / or R-390A
Not a lot of IBM stuff here. I can fit in a F-16 only because I've avoided the
IBM stuff
Bob
On Feb 27, 2010, at 10:18 PM, Larry Snyder wrote:
> Bob Camp wrote:
>> Hi
>>
>> MIght have to move a few things in the shed to fin in an F16.
>>
>> If they were used in
Bob Camp wrote:
> Hi
>
> MIght have to move a few things in the shed to fin in an F16.
>
> If they were used in quantity there aught to be cable and connectors
> out there. The only reason I have the stuff I do is good old IBM and
> their approach to networking back in the old days. It would be