> I switch counter to TIME MODE, because ADEV1 utility using times, not
> frequency:
No. ADEV1 expects phase. Not time, not period, not frequency.
> Here is from documentation:
>
> "Adev1 works on everything from pendulum clocks to hydrogen masers. The
> only restrictions are that the data must
Hi
Either the output data is with the counter set to time mode (and it’s in 100’s
of ns) or you have it
set to frequency mode and have a very stable system.
Bob
> On May 2, 2015, at 9:53 PM, d0ct0r wrote:
>
>
> Hello,
>
>
> I would like to create some charts for ADEV for following setup:
a file (more than 13 points), I'll make a
set of plots that you can compare against.
/tvb
- Original Message -
From: "d0ct0r"
To: "Discussion of precise time and frequency measurement"
Sent: Saturday, May 02, 2015 6:53 PM
Subject: [time-nuts] DDS, OCXO a
The counter is in TIME MODE. And simple calculation could transform it
to frequency as necessary. For example:
1/(350.50824*10^-9)
2852999.97512184021693755330
OR
1/0.00350508240900
2852999.96779619226350692058
Which is pretty close to my DDS VFO freq. value [2853000]
I switch cou
Hello,
I would like to create some charts for ADEV for following setup:
HP5386A counter connected to External REF. (OCXO). The input of counter
connected to my DDS VFO. The frequency on VFO is 2853000 Hz.
Here is what I got from counter via GPIB:
S +3.505082408E-7
S +3.505082408E-7
S +3.50
